Canon EOS RP Instruction Manual page 657

During the image transfer operation, a picture cannot be taken even if the
o
camera's shutter button is pressed.
The camera cannot be connected to multiple smartphones via Wi-Fi when it is
o
connected to another device via Wi-Fi.
You can cancel the image transfer by selecting [Cancel] during the transfer.
o
You can select up to 999 files at a time.
o
With a Wi-Fi connection established, disabling the smartphone's power saving
o
function is recommended.
Selecting the reduced size for still photos applies to all still photos sent at that
o
time. Note that b size still photos are not reduced.
Selecting compression for movies applies to all movies sent at that time.
o
When you use a battery to power the camera, make sure it is fully charged.
o
With a Wi-Fi connection established, the camera's auto power off does not
o
function.
Terminating the Wi-Fi Connection
To terminate the Wi-Fi connection, perform either of the following operations.
Connecting to a Smartphone via Wi-Fi
On the Camera Connect screen, tap
on [ ].
On the [qWi-Fi on] screen, select
[Disconnect,exit].
If the [ q Wi-Fi on] screen is not
z
displayed, select [Wi-Fi function] on
the [ 5 : Wireless communication
settings] screen.
Select [Disconnect,exit], then select
z
[OK] on the confirmation dialog.
449