Canon EOS RP Instruction Manual page 238

Handling Precautions
Screen and Viewfinder
Although the screen and viewfinder are manufactured with very high
z
precision technology with over 99.99% effective pixels, 0.01% or fewer
of the pixels may be dead, and there may also be spots of black, red,
or other colors. This is not a malfunction. They do not affect the images
recorded.
If the screen is left on for a prolonged period, screen burn-in may occur
z
where you see remnants of what was displayed. However, this is only
temporary and will disappear when the camera is left unused for a few
days.
The screen display may seem slightly slow in low temperatures or
z
may look black in high temperatures. It will return to normal at room
temperature.
Cards
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force,
z
physical shock, or vibration.
Do not touch the card's electronic contacts with your fingers or anything
z
metallic.
Do not affix any stickers, etc. on the card.
z
Do not store or use the card near anything that has a strong magnetic
z
field, such as a television, speakers, or magnets. Also avoid places prone
to having static electricity.
Do not leave the card in direct sunlight or near a heat source.
z
Store the card in a case.
z
Do not store the card in hot, dusty, or humid locations.
z
Lens
After detaching the lens from the camera, put down
z
the lens with the rear end up and attach the rear lens
cap to avoid scratching the lens surface and electrical
contacts (1).
30
(1)