Customizing Shutter Button Functionality For Movie Recording - Canon EOS RP Instruction Manual

Customizing Shutter Button Functionality
for Movie Recording
You can set the functions performed by pressing the shutter button halfway
or completely during movie recording.
With [Fully-press] set to [Start/stop mov rec], you can start/stop movie
recording not only by pressing the movie shooting button but also by
pressing the shutter button completely or by using Remote Switch RS-60E3
(sold separately, = 219).
[Half-press] switches from [Meter.+One-Shot AF] to [Meter.+ k Servo AF]
o
when [Movie rec. size] is set to [ H ].
Even if you set [Fully-press] to [No function], the camera will start or stop
o
recording time-lapse movies if the shutter button is pressed completely when
the camera is set up for time-lapse movies.
1
Select [5: Shutter btn function for
movies].
2
Select an item.
Half-press
z
Specify the function performed by
pressing the shutter button halfway.
Fully-press (shown in < k > mode)
z
Specify the function performed by
pressing the shutter button completely.
395