Canon EOS R5 C User Manual

Table of Contents

Quick Links

PUB. DIE-0561-000

Digital Cinema Camera

Advanced

User Guide

(PHOTO edition)

Table of Contents

Summary of Contents for Canon EOS R5 C

Page 1 PUB. DIE-0561-000 Digital Cinema Camera Advanced User Guide (PHOTO edition)
Page 2: Table Of Contents
Contents Introduction..........8 Package Contents.
Page 3 BULB: Long (Bulb) Exposures........116 Shooting and Recording.
Page 4 Image Review..........High-Speed Display.
Page 5 Rotating Still Photos..........390 Rating Images.
Page 6 Bluetooth Settings..........577 Nickname.
Page 7 UI Magnification..........653 HDMI Resolution.
Page 8: Introduction
When using the camera, exercise proper caution in order to protect privacy and avoid any violation of publicity rights. Connecting other devices Use the included interface cable or a Canon cable when connecting the camera to a computer or other device. When connecting an interface cable, also use the included cable protector ( The camera has two operation modes: PHOTO mode and VIDEO mode.
Page 9: Package Contents
The camera does not come with a memory card ( ) or HDMI cable. If you purchased a Lens Kit, check that the lenses are included. Be careful not to lose any of these items. No software CD-ROM is included. Software can be downloaded from the Canon website.
Page 10 Caution When you need Lens Instruction Manuals, download them from the Canon website The Lens Instruction Manuals (PDF files) are for lenses sold individually. Note that when purchasing the Lens Kit, some of the accessories included with the lens may...
Page 11: Instruction Manuals
VIDEO edition: Provides detailed instructions for the camera in VIDEO mode. Set the power switch to < > to set the camera to VIDEO mode. For the latest Advanced User Guide, refer to the following website. https://cam.start.canon/ Lens/Software Instruction Manual Download from the following website. https://cam.start.canon/...
Page 12: Quick Start Guide
Quick Start Guide Insert the battery ( Upon purchase, charge the battery to start using ( Insert the card ( You can insert two cards. Attach the lens ( Align the red mount index on the lens with the red mount index on the camera to attach the lens.
Page 13 Set the lens's focus mode switch to < > ( Set the power switch to < > ( Flip out the screen ( When the date/time/zone setting screen is displayed, see Date/Time/ Zone.
Page 14 Set the shooting mode to [ Press the < > button, then turn the < > dial to select [ All the necessary camera settings will be set automatically. Focus on the subject ( An AF point [ ] appears over any face detected. Press the shutter button halfway, and the camera will focus on the subject.
Page 15 Review the picture. The image just captured will be displayed for approx. 2 sec. on the screen. To display the image again, press the < > button (...
Page 16: About This Guide
About This Guide Icons in This Guide Basic Assumptions for Operational Instructions and Sample Photos Icons in This Guide Indicates the Main dial. < > Indicates Quick control dial 1. < > Indicates Quick control dial 2. < > Indicates the Multi-controller. <...
Page 17 Basic Assumptions for Operational Instructions and Sample Photos Before following any instructions, make sure the power switch is set to < > and the Multi-function lock feature is off ( It is assumed that all the menu settings and Custom Functions are set to their defaults. Illustrations in this guide show the camera with the RF24-105mm F4 L IS USM lens attached as an example.
Page 18: Compatible Cards
Compatible Cards The following cards can be used with the camera in PHOTO mode. If the card is new or was previously formatted (initialized) by another camera or computer, format it with this camera ( CFexpress cards * Type-B compatible SD/SDHC/SDXC memory cards * UHS-II and UHS-I cards supported.
Page 19: Safety Instructions
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children.
Page 20 Observe the following instructions when using a battery charger or AC adapter. • Use batteries/battery packs only with their specified product. • Do not heat batteries/battery packs or expose them to fire. • Do not charge batteries/battery packs using non-authorized battery chargers. •...
Page 21 CAUTION: Follow the cautions below. Otherwise physical injury or property damage may result. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness.
Page 22: Handling Precautions
If you accidentally drop the camera into water or are concerned that moisture (water), dirt, dust, or salt may have gotten inside it, promptly consult the nearest Canon Service Center. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Page 23 If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your nearest Canon Service Center or check the camera yourself and make sure it is working properly.
Page 24 Besides dust entering the camera from outside, in rare cases, lubricant from the camera's internal parts may adhere to the front of the sensor. If smudges are visible on images, have the sensor cleaned by a nearest Canon Service Center. Battery Tips for using the battery and charger Store in a cool, dry, well-ventilated location.
Page 25: Part Names
Part Names Attaching the Strap Using the Cable Protector (15) (16) (17) (18) (19) (20) (21) (22) (23) (10) (24) (11) (12) (26) (13) (25) (14)
Page 26 < > button* Button 10 (a function can be assigned to this button) < > Multi-function lock button* < > Main dial* < > Multi-function button* Shutter button* < > LCD panel info switching/illumination button* Self-timer lamp/AF-assist beam Remote control sensor (10) Grip (battery compartment) (11)
Page 27 (15) (10) (16) (17) (11) (18) (19) (12) (20) (13) (14) Multi-Function Shoe (with shoe cover) Flash sync contacts Speaker Terminal cover Eyecup < > Quick control dial 2* < > AE lock button* < > AF point selection button* Viewfinder eyepiece (10) Viewfinder sensor*...
Page 28 (10) (11) (12) (13) (14) (15) (16) (17) (20) (18) (21) (19) (22) (23)
Page 29 Dioptric adjustment knob Accessory positioning hole Tripod socket Air intake vent Voice memo microphone Serial number (body number) < > Playback button* < > Multi-controller* (can also be pressed straight in) < > Magnify/Reduce button* (10) < > AF start button* (11) Strap mount (12)
Page 30 LCD Panel Information Display Information displayed varies depending on camera status. For icon details, see Information Display. Viewfinder information display Information displayed varies depending on camera status. Battery Charger LC-E6 Charger for Battery Pack LP-E6NH/LP-E6N/LP-E6 ( Battery slot Charge lamp Power plug...
Page 31 Battery Charger LC-E6E Charger for Battery Pack LP-E6NH/LP-E6N/LP-E6 ( Charge lamp Battery pack slot Power cord Power cord socket...
Page 32 Attaching the Strap Pass the end of the strap through the strap mount from the bottom, then pass it through the strap buckle as shown. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Page 33 Using the Cable Protector When connecting the camera to a computer, use the included interface cable or a Canon cable. When connecting an interface cable, also use the included cable protector. Using the cable protector helps prevent accidental disconnection and terminal damage.
Page 34 Using a slim cable...
Page 35 Using a thick cable (3) Included interface cable Using a slim cable Using a thick cable...
Page 36 Using a slim cable Using a thick cable...
Page 37 Using a slim cable Using a thick cable (4) HDMI cable (sold separately)
Page 38 Using an optional Canon interface cable When using an optional Canon interface cable, pass the cable through the clamp (5) as shown before attaching the clamp to the cable protector. Caution Using the camera when the interface cable is connected without the cable protector may damage the digital terminal.
Page 39: Preparation And Basic Operations
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations. • Charging the Battery • Inserting/Removing Batteries • Inserting/Removing Cards • Using the Screen • Turning on the Power • Attaching/Detaching RF Lenses •...
Page 40: Charging The Battery
Charging the Battery Detach the protective cover provided with the battery. Fully insert the battery into the charger. Do the opposite to remove the battery.
Page 41 Recharge the battery. For LC-E6 As shown by the arrow, flip out the battery charger's prongs and insert the prongs into a power outlet. For LC-E6E Connect the power cord to the charger and insert the plug into a power outlet.
Page 42 Upon purchase, the battery is not fully charged. Charge the battery before use. Charge the battery on the day before or on the day it is to be used. Charged batteries gradually lose their charge, even when they are not used. After charging the battery, remove it and disconnect the charger from the power outlet.
Page 43: Inserting/Removing Batteries
Inserting/Removing Batteries Insertion Removal Insert a fully charged Battery Pack LP-E6NH (or LP-E6N/LP-E6) in the camera. Insertion Slide the battery compartment cover lock and open the cover. Insert the battery. Insert the end with the electrical contacts. Insert the battery until it locks in place.
Page 44 Close the cover. Press the cover until it snaps shut. Caution You cannot use batteries other than Battery Pack LP-E6NH/LP-E6N/LP-E6.
Page 45 Removal Open the cover and remove the battery. Press the battery lock lever as shown by the arrow and remove the battery. To prevent short-circuits, always attach the included protective cover ) to the battery.
Page 46: Inserting/Removing Cards
Inserting/Removing Cards Insertion Formatting the Card Removal This camera accepts two cards. Recording is possible as long as there is at least one card in the camera. With two cards inserted, you can select one card to record to, or you can record the same image to both cards at once ( Caution Make sure the SD card's write-protect switch (1) is set upward to enable...
Page 47 Insert the card. Card 1 (CFexpress card) Card 2 (SD card) The card in the rear card slot is [ ] (CFexpress card), and the one in front of it is [ ] (SD card). CFexpress card: With the card label facing you, insert the open side of the card (2) into the card slot.
Page 48 Close the cover. Close the cover and slide it in the direction shown by the arrows until it snaps shut.
Page 49 Set the power switch to < > ( (3) Card selection icon (4) Card 1 (CFexpress card) (5) Card 2 (SD card) Shooting screen ( ) or Quick Control screen ( ) accessed by pressing the < > button shows which cards are loaded. Cards labeled with [ ] are selected for recording.
Page 50 Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (...
Page 51 Removal Open the cover. Set the power switch to < >. Check that the access lamp (1) is off, then open the cover. If [Saving...] is displayed on the screen, close the cover. Remove the card. CFexpress card: Press the card eject button (2) to eject the card. SD card: Gently press the card in, then release it to eject it.
Page 52 Caution When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot cover during this time. To avoid corrupting image data or damaging cards or the camera, never do any of the following while the access lamp is lit or blinking.
Page 53: Using The Screen
Using the Screen You can change the direction and angle of the screen. Flip out the screen. Rotate the screen. When the screen is out, you can tilt it up or down or rotate it to face the subject. Indicated angles are only approximate. Face it toward you.
Page 54 Caution Avoid forcing the screen into position as you rotate it, which puts undue pressure on the hinge. When a cable is connected to a camera terminal using the cable protector, the rotation angle range of the flipped-out screen will be limited. Note Keep the screen closed and facing the camera body when the camera is not in use.
Page 55: Turning On The Power
Turning on the Power Setting the Date, Time, and Time Zone Changing the Interface Language Automatic Sensor Cleaning Battery Level Indicator < > The camera turns on in PHOTO mode. < > The camera is turned off and does not function. Set the power switch to this position when not using the camera.
Page 56 Changing the Interface Language To change the interface language, see Language.
Page 57 Automatic Sensor Cleaning Whenever the power switch is set to < >, the sensor is cleaned automatically (which may make a faint sound). During the sensor cleaning, the screen will display ]. To enable automatic sensor cleaning when the power switch is set to < >...
Page 58 Battery Level Indicator When the power switch is set to < >, the battery level will be indicated. Display Level (%) 100–70 69–50 49–20 19–10 9–1 Note Doing any of the following will exhaust the battery faster: • Pressing the shutter button halfway for a prolonged period. •...
Page 59: Attaching/Detaching Rf Lenses
Attaching/Detaching RF Lenses Attaching a Lens Detaching a Lens Caution Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera's power switch to < >.
Page 60 Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. Attach the lens. Align the red mount index on the lens with the red mount index on the camera and turn the lens as shown by the arrow until it clicks in place.
Page 61 Set the lens's focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. For RF lenses without a focus mode switch, set to [AF] or [MF] in the camera menu, in [ : Focus mode].
Page 62 Detaching a Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach lens caps to the lens you removed.
Page 63: Attaching/Detaching Ef/Ef-S Lenses
Attaching/Detaching EF/EF-S Lenses Attaching a Lens Detaching a Lens All EF and EF-S lenses can be used by attaching an optional Mount Adapter EF-EOS R. The camera cannot be used with EF-M lenses. Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
Page 64 Attach the lens to the adapter. Align the red or white mount index on the lens with the corresponding mount index on the adapter and turn the lens as shown by the arrow until it clicks into place. (1) Red index (2) White index Attach the adapter to the camera.
Page 65 Set the lens's focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. Remove the front lens cap.
Page 66 Detaching a Lens While pressing the lens release button, turn the adapter as shown by the arrow. Turn the lens until it stops, then detach it. Detach the lens from the adapter. Hold down the lens release lever on the adapter and turn the lens counterclockwise.
Page 67: Using The Viewfinder
Using the Viewfinder Look through the viewfinder to activate it. You can also restrict display to either the screen or viewfinder ( Adjusting the Viewfinder Turn the dioptric adjustment knob. Turn the knob left or right to make the viewfinder display look sharp. Caution The viewfinder and screen cannot be activated at the same time.
Page 68: Basic Operations
Basic Operations Holding the Camera Shutter Button < > Main Dial < > Quick Control Dial 1 < > Quick Control Dial 2 < > Multi-Controller < > Button < >: Multi-Function Button < >: AF Start Button < >: Multi-Function Lock Button <...
Page 69 Holding the Camera Viewing the screen as you shoot As you shoot, you can tilt the screen to adjust it. For details, see Using the Screen. (1) Normal angle (2) Low angle (3) High angle Shooting through the viewfinder To obtain sharp images, hold the camera still to minimize camera shake. (1) Horizontal shooting (2) Vertical shooting 1.With your right hand, hold the camera firmly by the camera grip.
Page 70 Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture value. The exposure value (shutter speed and aperture value) is displayed on the screen, in the viewfinder, or on the LCD panel for 8 sec.
Page 71 Note The camera will still pause before taking a picture if you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and immediately press it completely. Even during menu display or image playback, you can return to shooting standby by pressing the shutter button halfway.
Page 72 < > Main Dial (1) After pressing a button, turn the < > dial. Press a button such as < > or < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as setting the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation.
Page 73 < > Quick Control Dial 1 (1) After pressing a button, turn the < > dial. Press a button such as < > or < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as selecting the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation.
Page 74 < > Quick Control Dial 2 (1) After pressing a button, turn the < > dial. Press a button such as < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as switching between main tabs on the menu screen.
Page 75 < > Multi-Controller < > is an eight-direction key with center button. To use it, press lightly with the tip of your thumb. Used for operations such as white balance correction, AF point/magnifying frame movement in still photo shooting, magnifying frame movement during playback, or Quick Control settings.
Page 76 < > Button You can set the shooting mode. Press the < > button, then turn the < > dial to select a shooting mode.
Page 77 < >: Multi-Function Button By pressing the < > button and turning the < > dial, you can set the ISO speed ), drive mode ( ), AF operation ( ), white balance ( ), and flash exposure compensation ( To select the AF area or AF method, press the <...
Page 78 < >: AF Start Button Equivalent to pressing the shutter button halfway (except in [ ] mode).
Page 79 < >: Multi-Function Lock Button With [ : Multi function lock] configured ( ), you can press the < > button to prevent settings from being changed by accidentally touching the Main dial, Quick Control dials, Multi-controller, control ring, or touch-screen panel. Press the < >...
Page 80 < > LCD Panel Info Switching/Illumination Button Each press of the < > button changes the information on the LCD panel. Illuminate the LCD panel by holding down the < > button ( Access the [Screen brightness] setting by pressing the < >...
Page 81 < > Control Ring By default, exposure compensation can be set by turning the control ring of RF lenses or mount adapters while pressing the shutter button halfway in [ ], [ ], [ ], [ ], or [ mode. Otherwise, you can assign a different function to the control ring by customizing operations in [ : Customize dials] (...
Page 82 < >: Info Button Each press of the < > button changes the information shown. The following sample screens are for still photos.
Page 83: Menu Operations And Settings
Menu Operations and Settings Menu Screen in [ ] Mode Menu Screen in [ ]/[ ]/[ ] Mode Menu Setting Procedure Dimmed Menu Items < > button < > button < > button Screen < > Quick control dial 1 <...
Page 84 Menu Screen in [ ] Mode In [ ] mode, some tabs and menu items are not displayed.
Page 85 Menu Screen in [ ]/[ ]/[ ]/[ ]/[ ] Mode Main tabs Secondary tabs Menu items : Shooting : Autofocus : Playback : Wireless features : Set-up : Custom Functions (10) : My Menu (11) Menu settings...
Page 86 Menu Setting Procedure Display the menu screen. Press the < > button to display the menu screen. Select a tab. Each time you turn the < > dial, the main tab (group of functions) will switch. You can also switch tabs by pressing the < >...
Page 87 Select an option. Turn the < > dial to select an option. The current setting is indicated in blue. Set an option. Press < > to set it. Exit the setting. Press the < > button to return to shooting standby. Note The description of menu functions hereafter assumes that you have pressed the <...
Page 88 Dimmed Menu Items Example: When Highlight tone priority has been set Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <...
Page 89: Quick Control
Quick Control You can directly and intuitively select and set the settings displayed. Press the < > button ( Select a setting item and set your preferred option. To select an item, turn the < > dial or press < >...
Page 90: Touch-Screen Operation
Touch-Screen Operation Tapping Dragging Tapping Sample screen (Quick Control) Use your finger to tap (touch briefly and then remove your finger from) the screen. For example, when you tap [ ], the Quick Control screen appears. By tapping [ you can return to the preceding screen. Note To have the camera beep for touch operations, set [ : Beep] to [Enable] ( Responsiveness to touch operations can be adjusted in [ : Touch control] (...
Page 91 Dragging Sample screen (Menu screen) Slide your finger while touching the screen.
Page 92: Shooting Mode
Shooting Mode This chapter describes shooting modes. • A+: Fully Automatic Shooting (Scene Intelligent Auto) • A+: Fully Automatic Techniques (Scene Intelligent Auto) • Fv: Flexible-Priority AE • P: Program AE • Tv: Shutter-Priority AE • Av: Aperture-Priority AE • M: Manual Exposure •...
Page 93: A+: Fully Automatic Shooting (Scene Intelligent Auto)
A+: Fully Automatic Shooting (Scene Intelligent Auto) ] is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject ( Set the shooting mode to [ Press the <...
Page 94 Focus on the subject. Press the shutter button halfway to focus. You can also focus by tapping a person's face or another subject on the screen (Touch AF) when [ : Continuous AF] is set to [Disable]. Under low light, the AF-assist beam ( ) is automatically activated if needed.
Page 95 Note AF operation (One-Shot AF or Servo AF) is set automatically when you press the shutter button halfway. Note that AF operation cannot be switched during shooting. ] mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
Page 96 (autofocus). The shutter speed display is blinking. Since it is too dark, taking the picture may result in a blurred subject due to camera shake. Using a tripod or a Canon EL/EX series Speedlite (sold separately, ) is recommended. The bottom of pictures taken with flash is unnaturally dark.
Page 97: A+: Fully Automatic Techniques (Scene Intelligent Auto)
A+: Fully Automatic Techniques (Scene Intelligent Auto) Recomposing the Shot Shooting Moving Subjects Scene Icons Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. Pressing the shutter button halfway to focus on a still subject will lock the focus on that subject.
Page 98 Shooting Moving Subjects After you press the shutter button halfway and a blue AF point appears, the camera detects subject movement and focuses using Servo AF. Keep the subject on the screen as you hold down the shutter button halfway, and at the decisive moment, press the shutter button completely.
Page 99 Scene Icons The camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated in the upper left of the screen. For icon details, see Scene Icons.
Page 100: Fv: Flexible-Priority Ae
Fv: Flexible-Priority AE In this mode, you can set shutter speed, aperture value, and ISO speed manually or automatically and combine these settings with your choice of exposure compensation. Shooting in [ ] mode, with control over each of these parameters, is equivalent to shooting in [ ], [ ], [ ], or [...
Page 101 Set the amount of exposure compensation. Turn the < > dial and select the exposure level indicator. [ appears to the left of the exposure level indicator. Turn the < > dial to set the option. To reset the setting to [±0], press the < >...
Page 102 Note Values for shutter speed, aperture value, and ISO speed that are set to [AUTO] are underlined. You can set shutter speed, aperture value, and ISO speed to [AUTO] and exposure compensation amount to [±0] in step 2 or 3 by holding down the < >...
Page 103: P: Program Ae
P: Program AE The camera automatically sets the shutter speed and aperture value to suit the subject's brightness. * [ ] stands for Program. * AE stands for Auto Exposure. Set the shooting mode to [ ]. Press the < >...
Page 104 Check the display. As long as the exposure value is not blinking, standard exposure will be obtained. Take the picture. Compose the shot and press the shutter button completely. Caution If the “30"” shutter speed and the lowest aperture value blink, it indicates underexposure.
Page 105 Note Differences between [ ] and [ ] modes ] mode limits available functions and sets the AF method, metering mode, and many other functions automatically to prevent bad shots. In contrast, [ ] mode only sets the shutter speed and aperture value automatically, and you can freely set the AF method, metering mode, and other functions.
Page 106: Tv: Shutter-Priority Ae
Tv: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture value to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion.
Page 107 Set the desired shutter speed. Turn the < > dial to set it. Focus on the subject. Press the shutter button halfway. The aperture value is set automatically. Check the display and shoot. As long as the aperture value is not blinking, the standard exposure will be obtained.
Page 108 Note Shutter speed display For example, “0"5” indicates 0.5 sec. and “15"”, 15 sec. Shutter speeds from “8000” to “4” on the LCD panel indicate the denominator of the fractional shutter speed.
Page 109: Av: Aperture-Priority Ae
Av: Aperture-Priority AE Depth-of-Field Preview In this mode, you set the desired aperture value and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/ number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.
Page 110 Set the desired aperture value. Turn the < > dial to set it. Focus on the subject. Press the shutter button halfway. The shutter speed is set automatically. Check the display and shoot. As long as the shutter speed is not blinking, the standard exposure will be obtained.
Page 111 Note Aperture value display The higher the value, the smaller the aperture opening will be. The aperture value displayed varies depending on the lens. If no lens is attached to the camera, “F00” will be displayed for the aperture.
Page 112 Depth-of-Field Preview Press the depth-of-field preview button to stop down the lens to the current aperture value setting and check the area in focus (depth of field). Note The larger the aperture value, the wider the area in focus, from the foreground to the background.
Page 113: M: Manual Exposure
M: Manual Exposure Exposure Compensation with ISO Auto In this mode, you set both the shutter speed and aperture value as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. ] stands for Manual. Set the shooting mode to [ Press the <...
Page 114 Focus on the subject. Press the shutter button halfway. Check the exposure level mark [ ] to see how far the current exposure level is from the standard exposure level. (1) Standard exposure index (2) Exposure level mark Set the exposure and take the picture. Check the exposure level indicator and set the desired shutter speed and aperture value.
Page 115 Note In [ ] mode with ISO Auto, [ ] (evaluative metering), and [ : AE lock meter. mode after focus] set to the default setting ( ), holding down the shutter button halfway locks the ISO speed after the camera focuses with One-Shot AF. When ISO Auto is set, you can press the <...
Page 116: Bulb: Long (Bulb) Exposures
BULB: Long (Bulb) Exposures Bulb Timer In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, astrophotography, and other subjects requiring long exposures. Set the shooting mode to [ Press the <...
Page 117 Take the picture. The exposure will continue for as long as you keep the shutter button pressed completely. Elapsed exposure time is displayed on the LCD panel. Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source.
Page 118 Select [ : Bulb timer]. Select [Enable]. Select [Enable], then press the < > button. Set the exposure time. Select an option (hours : minutes : seconds). Press < > to display [ ]. Set a value, then press < >.
Page 119 Select [OK]. Take the picture. After you press the shutter button completely, the bulb exposure continues for your specified time. ] and the exposure time are displayed on the LCD panel during bulb timer shooting. To clear the timer setting, select [Disable] in step 2. Caution Bulb exposure stops if you press the shutter button completely and release it during the timer.
Page 120: Shooting And Recording
Shooting and Recording This chapter describes shooting and recording and introduces menu settings on the shooting ([ ]) tab.
Page 121: Still Photo Shooting
Still Photo Shooting to the right of titles indicates functions only available in [ ], [ ], [ ], [ ], [ ], or ] mode. • Tab Menus: Still Photo Shooting • Image Quality • Dual Pixel RAW • Still Photo Cropping/Aspect Ratio •...
Page 122 • Interval Timer Shooting • Shutter Mode • Releasing Shutter without Card • Shooting with the Touch Shutter • Image Review • High-Speed Display • Metering Timer • Exposure Simulation • Shooting Information Display • Viewfinder Display Format • Display Performance •...
Page 123: Tab Menus: Still Photo Shooting
Tab Menus: Still Photo Shooting Shooting 1 Image quality Dual Pixel RAW Cropping/aspect ratio Shooting 2 Expo.comp./AEB ISO speed settings HDR PQ settings Auto Lighting Optimizer Highlight tone priority Anti-flicker shoot. External Speedlite control...
Page 124 Shooting 3 White balance Custom White Balance WB Shift/Bkt. Color space (5) Picture Style • Picture Style Selection • Picture Style Customization • Picture Style Registration Clarity Lens aberration correction Shooting 4 Long exp. noise reduction High ISO speed NR Dust Delete Data...
Page 125 Shooting 5 Multiple exposure HDR Mode Focus bracketing Shooting 6 Interval timer Bulb timer Shutter mode Release shutter without card...
Page 126 Shooting 7 Touch Shutter Image review High speed display Metering timer Expo. simulation Shooting info. disp. Shooting 8 VF display format Disp. performance...
Page 127 In [ ] mode, the following screens are displayed. Shooting 1 Image quality Dual Pixel RAW Cropping/aspect ratio Shooting 2 Interval timer Release shutter without card...
Page 128 Shooting 3 Touch Shutter Image review Shooting info. disp. VF display format Disp. performance...
Page 129: Image Quality
Image Quality RAW Images Guide to Image Quality Settings Maximum Burst for Continuous Shooting You can select the pixel count and the image quality. JPEG and HEIF image quality options include , and RAW image quality options include Select [ : Image quality].
Page 130 Set the image quality. Standard/Auto switch card/Record to multiple For RAW images, turn the < > dial, and for JPEG images, turn the < > dial. Press < > to set it. Record separately When [ Record func.] in [ : Record func+card/folder sel.] is set to [Rec.
Page 131 Note HEIF can be specified when [HDR shooting ] in [ : HDR PQ settings] is set to [Enable]. You can convert these images to JPEG images after shooting ( is set if you set both RAW and JPEG/HEIF to [ Two versions of each shot are recorded at your specified image quality when you have selected both RAW and JPEG/HEIF.
Page 132 Ver. 4.x is installed on your computer, obtain and install the latest version of DPP from the Canon website to update it, which will overwrite the previous version. Similarly, DPP Ver. 3.x or earlier does not support display, processing, editing, or other operations with RAW images captured by this camera.
Page 133 Guide to Image Quality Settings Still photo file size / Number of possible shots / Maximum burst for continuous shooting for details on file size, number of shots available, maximum burst, and other estimated values.
Page 134 Maximum Burst for Continuous Shooting The approximate maximum burst is displayed at the upper left of the shooting screen and lower right of the viewfinder. Note If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously.
Page 135: Dual Pixel Raw
Dual Pixel RAW Shooting images with this feature enabled produces special Dual Pixel RAW images containing dual pixel information from the image sensor. This is called Dual Pixel RAW shooting. When processing these images on the camera, you can adjust the images by applying portrait relighting ( ) and background clarity ( When processing the images in Digital Photo Professional software for EOS cameras, you...
Page 136 Caution Startup takes longer when the power switch is set to < > or the camera resumes operation from auto power off. Continuous shooting speed is slower when you shoot with Dual Pixel RAW ( Maximum burst is also lower. ] and [ ] drive modes are not available.
Page 137: Still Photo Cropping/Aspect Ratio
Still Photo Cropping/Aspect Ratio Normally with RF or EF lenses, images are captured at the sensor size of approx. 36.0×24.0mm in full-frame shooting, but in cropped shooting, you can isolate and magnify the center of the image approx. 1.6 (APS-C size) as if using a telephoto lens, or you can set an aspect ratio as needed before shooting.
Page 138 Select how the shooting area is displayed. On the screen in step 2, press the < > button. Select the type of display, then press < >. Caution image quality options are not available when [1.6x (crop)] is set, or with EF-S lenses. Shooting with [1.6x (crop)] and image quality set to produces images, respectively.
Page 139 Take the picture. Setting examples When is set When is set or an EF-S lens is used When is set When is set...
Page 140 When [1.6x (crop)] is set or an EF-S lens is used, an image magnified approx. 1.6× is displayed. When [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] is set, the image within the black masked or outlined area is captured. Caution Areas outside the cropped area are not recorded in RAW shooting when [1.6x (crop)] is set, or with EF-S lenses.
Page 141: Auto Exposure Bracketing (Aeb)
Auto Exposure Bracketing (AEB) In exposure bracketing, three consecutive images are captured at different exposures within your specified range of up to ±3 stops (in 1/3-stop increments) by automatically adjusting the shutter speed, aperture value, or ISO speed. * AEB stands for Auto Exposure Bracketing. Select [ : Expo.comp./AEB].
Page 142 Take the picture. Standard exposure Decreased exposure Increased exposure Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure. AEB will not be automatically canceled. To cancel AEB, follow step 2 to turn off the AEB range display.
Page 143: Iso Speed Settings For Still Photos
ISO Speed Settings for Still Photos ISO Speed Range When Set Manually ISO Speed Range Used with ISO Auto Minimum Shutter Speed for ISO Auto Set the ISO speed (image sensor's sensitivity to light) to suit the ambient light level. In [ mode, ISO speed is set automatically.
Page 144 Note ISO speed can also be set in the ISO speed item by pressing the < > button with an image displayed on the screen. Can also be set on the [ISO speed] screen in [ ISO speed settings]. To expand the available ISO speed range from L (equivalent to ISO 50) to H (equivalent to ISO 102400), adjust [ISO speed range] in [ ISO speed settings] (...
Page 145 ISO Speed Range When Set Manually You can set the manual ISO speed setting range (minimum and maximum limits). You can set the minimum limit within L (equivalent to ISO 50) to ISO 51200, and the maximum limit within ISO 100 to H (equivalent to ISO 102400). Select [ ISO speed settings].
Page 146 Set [Maximum]. Select the [Maximum] box, then press < >. Select the ISO speed, then press < >. Select [OK].
Page 147 ISO Speed Range Used with ISO Auto You can set the automatic ISO speed range for ISO Auto within ISO 100–51200. The minimum can be set within ISO 100–25600 and the maximum within ISO 200–51200, in 1- stop increments. Select [Auto range]. Set [Minimum].
Page 148 Set [Maximum]. Select the [Maximum] box, then press < >. Select the ISO speed, then press < >. Select [OK]. Note The [Minimum] and [Maximum] settings will also function as the minimum and maximum speeds for ISO speed safety shift (...
Page 149 Minimum Shutter Speed for ISO Auto To prevent shutter speeds from being set too low automatically, you can set the minimum shutter speed for ISO Auto. This is effective in [ ] or [ ] mode when shooting subjects in motion with a wide-angle lens, or when using a telephoto lens.
Page 150 Set the desired minimum shutter speed. Auto If you select [Auto], turn the < > dial to set the difference relative to standard speed (toward Slower or Faster), then press < >. Manual If you select [Manual], turn the < >...
Page 151: Hdr Pq Settings
HDR PQ Settings PQ in HDR PQ refers to the gamma curve of the input signal for displaying HDR images. HDR PQ settings enable the camera to produce HDR images conforming to the PQ specification defined in ITU-R BT.2100 and SMPTE ST.2084. (Actual display depends on monitor performance.) Shots are captured as HEIF or RAW images.
Page 152 Set [HDR assist disp: shooting]. On the screen, converted images are displayed that resemble how the images would look on an HDR display device. Select [Exposure prior. (mid-tones)] or [Tones prior. (highlights)]. ] Exposure prior. (mid-tones) Provides reference display that emphasizes exposure of subjects (such as people) with intermediate brightness.
Page 153 Set [HDR assist disp: playback]. Converted images are displayed on the screen for playback, giving an impression similar to how they would appear on an HDR display device. Select [Exposure prior. (mid-tones)] or [Tones prior. (highlights)]. ] Exposure prior. (mid-tones) Provides reference display that emphasizes exposure of subjects (such as people) with intermediate brightness.
Page 154 Caution Expanded ISO speeds (L, H) are not available in HDR shooting. Some scenes may look different from how they appear on an HDR display device. Histograms of images captured with [HDR shooting ] set to [Enable] are not based on images as converted for HDR assist display. Image areas shown in gray in the histogram roughly indicate signal values that are not used.
Page 155: Auto Lighting Optimizer
Auto Lighting Optimizer Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. In [ ] mode, [Standard] is set automatically. Select [ : Auto Lighting Optimizer]. Set a correction option. Caution Noise may increase and apparent resolution may change, under some shooting conditions.
Page 156 Note images, face lighting can be adjusted in [ : RAW processing (RAW/DPRAW)] ( To enable [ : Auto Lighting Optimizer] to be set even in [ ] and [ ] modes, press the < > button in step 2 to clear the checkmark [ ] for [Disabled in M or B modes].
Page 157: Highlight Tone Priority
Highlight Tone Priority You can reduce overexposed, clipped highlights. Select [ : Highlight tone priority]. Set an option. [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. Caution Noise may increase slightly.
Page 158: Anti-Flicker Shooting
Anti-Flicker Shooting Uneven exposure and color may result if you shoot at fast shutter speeds under flickering light sources such as fluorescent lights, due to uneven vertical exposure. Anti-flicker shooting enables you to take pictures when exposure and colors are less affected by flickering.
Page 159 Caution When [Enable] is set and you shoot under a flickering light source, the shutter- release time lag may become longer. Also, the continuous shooting speed may become slower, and the shooting interval may become irregular. Flicker at a frequency other than 100 Hz or 120 Hz cannot be detected. Also, if the flickering frequency of the light source changes during continuous shooting, effects of the flicker cannot be reduced.
Page 160: Shooting With Speedlites
Shooting with Speedlites EL/EX Series Speedlites for EOS Cameras Canon Speedlites Other Than the EL/EX Series Non-Canon Flash Units EL/EX Series Speedlites for EOS Cameras Features of EL/EX series Speedlites (sold separately) can be used in flash photography with the camera.
Page 161 Note The Speedlite will automatically fire an AF-assist beam as needed, if autofocusing is difficult under low light. You can also set flash exposure compensation on the Quick Control screen ( ) or in the [Flash function settings] setting of [ : External Speedlite control] ( The camera can turn on certain Speedlites automatically when the camera is turned on.
Page 162 Canon Speedlites Other Than the EL/EX Series With an EZ/E/EG/ML/TL series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only. Set the camera's shooting mode to [ ] or [ ] and adjust the aperture value before shooting.
Page 163 Non-Canon Flash Units Sync speed The camera can synchronize with non-Canon compact flash units at up to 1/250 sec. (or up to 1/200 sec. with [ : Shutter mode] set to [Mechanical]). With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model.
Page 164: Flash Function Settings
Flash Function Settings Flash Firing E-TTL Balance E-TTL II Flash Metering Continuous Flash Control Slow Synchro Flash Function Settings Flash Custom Function Settings Clearing Flash Function Settings/Clearing All Speedlite Custom Functions Functions of EL/EX Series Speedlites compatible with flash function settings can be set via a camera menu screen.
Page 165 Select an option. Flash Firing To enable flash photography, set to [Enable]. To enable only the AF-assist beam of the Speedlite, set to [Disable].
Page 166 E-TTL Balance You can set your preferred appearance (balance) for flash shots. This setting enables you to adjust the ratio of ambient light to Speedlite light output. Set the balance to [Ambience priority] to lower the proportion of flash output and uses ambient light to produce lifelike shots with a natural mood.
Page 167 E-TTL II Flash Metering Set to [Eval (FacePrty)] for flash metering suitable for shots of people. The continuous shooting speed for high-speed continuous shooting is slower than when [Evaluative] or [Average] is selected. Set to [Evaluative] for flash metering that emphasizes firing in continuous shooting. If [Average] is set, the flash exposure will be averaged for the entire metered scene.
Page 168 Continuous Flash Control Set to [E-TTL each shot] to perform flash metering for each shot. Set to [E-TTL 1st shot] to perform flash metering for only the first shot before continuous shooting. The flash output level for the first shot is applied to all subsequent shots. Useful when prioritizing continuous shooting speed without recomposing shots.
Page 169 Slow Synchro You can set the flash-sync speed for flash photography in [ ] or [ ] mode. Note that the maximum flash synchronization speed varies depending on the [ : Shutter mode] setting. It is 1/250 sec. when set to [Elec. 1st-curtain] and 1/200 sec. when set to [Mechanical]. : 1/250-30sec.
Page 170 Flash Function Settings The information displayed on the screen, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors. For details on the Speedlite's functions, refer to the Speedlite's Instruction Manual. Sample display Flash mode Wireless functions/...
Page 171 Flash mode You can select the flash mode to suit your desired flash photography. [E-TTL II flash metering] is the standard mode of EL/EX series Speedlites for automatic flash photography. [Manual flash] is for setting the Speedlite's [Flash output level] yourself. [CSP] (Continuous shooting priority mode) is available when using a compatible Speedlite.
Page 172 Wireless functions You can use radio or optical wireless transmission to shoot with wireless multiple-flash lighting. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. Firing ratio control (RATIO) With a macro flash, you can set the firing ratio control. For details on firing ratio control, refer to the Instruction Manual of the macro flash.
Page 173 Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the shooting starts. Set to [Second-curtain synchronization] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Set to [High-speed synchronization] for flash photography at higher shutter speeds than the maximum flash sync shutter speed.
Page 174 Flash exposure bracketing Speedlites equipped with flash exposure bracketing (FEB) can change the external flash output automatically as three shots are taken at once.
Page 175 Flash Custom Function Settings For details on the Speedlite's Custom Functions, refer to the Instruction Manual of the Speedlite. Select [Flash C.Fn settings]. Set the desired functions. Select the number. Select an option. Caution With an EX series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] Custom Function is set to [TTL flash metering] (autoflash).
Page 176 Clearing Flash Function Settings/Clearing All Speedlite Custom Functions Select [Clear settings]. Select the settings to be cleared. Select [Clear flash settings] or [Clear all Speedlite C.Fn's]. Select [OK] on the confirmation screen to clear all flash settings or Custom Function settings.
Page 177: White Balance
White Balance White Balance ] Auto White Balance ] Custom White Balance ] Color Temperature White balance (WB) is for making the white areas look white. Normally, the Auto [ (Ambience priority) or [ ] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object.
Page 178 Select a white balance setting. Turn the < > dial to make a selection. Note For [ ] and [ ] setting instructions, see ] Auto White Balance. To set your preferred color temperature, select [ ] in [ : White balance], then turn the <...
Page 179 White Balance The human eye adapts to changes in lighting so that white objects look white under all kinds of lighting. Digital cameras determine white from the color temperature of lighting and, based on this, apply image processing to make color tones look natural in your shots.
Page 180 ] Auto White Balance With [ ] (Ambience priority), you can slightly increase the intensity of the image's warm color cast when shooting a tungsten-light scene. If you select [ ] (White priority), you can reduce the intensity of the image's warm color cast.
Page 181 Caution Precautions when set to [ ] (White priority) The warm color cast of subjects may fade. When multiple light sources are included in the scene, the warm color cast of the picture may not be reduced. When using flash, the color tone will be the same as with [ ] (Ambience priority).
Page 182 ] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. Registration from an image on a card Shoot a white object.
Page 183 Select [ : Custom White Balance]. Import the white balance data. Turn the < > dial to select the image captured in step 1, then press < >. Select [OK] to import the data. Select [ : White balance]. Select the custom white balance. Select [...
Page 184 Shooting and registering white balances Press the < > button. Select the white balance item. Turn the < > dial or press < > up or down for selection. Select [Record and register WB]. Turn the < > or < >...
Page 185 Shoot a white object. Aim the camera at a plain white object, so that white fills the screen. Set the camera to manual focus ( ) and shoot so that the white object has standard exposure. The custom white balance is registered to the camera. Caution Correct white balance may not be obtained if the exposure of your image differs greatly from standard exposure.
Page 186 ] Color Temperature A value can be set representing the white balance color temperature. Select [ : White balance]. Set the color temperature. Select [ Turn the < > dial to set a color temperature, then press < >. The color temperature can be set from approx. 2500K to 10000K in 100K increments.
Page 187: White Balance Correction
White Balance Correction White Balance Correction White Balance Auto Bracketing You can correct the white balance that is set. This adjustment will have the same effect as using a commercially available color temperature conversion filter or color compensating filter. White Balance Correction Select [ : WB Shift/Bkt.].
Page 188 Set the white balance correction. Sample setting: A2, G1 Use < > to move the “■” mark on the screen to your preferred position. B is for blue, A for amber, M for magenta, and G for green. White balance is corrected in the direction you move the mark. On the right of the screen, [Shift] indicates the direction and correction amount, respectively.
Page 189 White Balance Auto Bracketing White balance bracketing enables you to capture three images at once with different color tones. Setting the white balance bracketing amount In step 2 for White Balance Correction, when you turn the < > dial, the “■” mark on the screen will change to “■...
Page 190 Note The images will be bracketed in the following sequence: 1. Standard white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard white balance, 2. Magenta (M) bias, and 3. Green (G) bias. You can also set white balance correction and AEB together with white balance bracketing.
Page 191: Color Space
Color Space The range of reproducible colors is called the “color space.” For normal shooting, sRGB is recommended. In [ ] mode, [sRGB] is set automatically. Select [ : Color space]. Set a color space option. Select [sRGB] or [Adobe RGB], then press < >.
Page 192: Picture Style Selection
Picture Style Selection Picture Style Characteristics Symbols Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. In [ ] mode, [ ] (Auto) is set automatically. Select [ : Picture Style]. Select a Picture Style.
Page 193 Picture Style Characteristics Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor, and sunset scenes. Note If the desired color tone is not obtained with [Auto], use another Picture Style. Standard The image looks vivid, sharp, and crisp.
Page 194 User Def. 1–3 You can add a new style based on presets such as [Portrait] or [Landscape] or a Picture Style file, then adjust it as needed ( ). With any User Defined Picture Style that has not yet been registered, pictures will be taken with the same characteristics settings as with the default settings of [Standard].
Page 195 Symbols Icons on the Picture Style selection screen represent [Strength], [Fineness], and [Threshold] for [Sharpness] as well as [Contrast] and other parameters. The numbers indicate the values for these settings specified for the respective Picture Style. Sharpness Strength Fineness Threshold Contrast Saturation Color tone...
Page 196: Picture Style Customization
Picture Style Customization Settings and Effects Monochrome Adjustment You can customize any Picture Style by changing it from the default settings. For details on customizing [Monochrome], see Monochrome Adjustment. Select [ : Picture Style]. Select a Picture Style. Select the Picture Style to adjust, then press the < >...
Page 197 Select an option. Select an option, then press < >. For details on settings and effects, see Settings and Effects. Set the effect level. Adjust the effect level, then press < >. Press the < > button to save the adjusted setting and return to the Picture Style selection screen.
Page 198 Note By selecting [Default set.] in step 3, you can restore the parameter settings of the respective Picture Style to the defaults. To shoot with the Picture Style you adjusted, first select the adjusted Picture Style, then shoot. Settings and Effects Sharpness Strength 0: Weak outline emphasis...
Page 199 Monochrome Adjustment Filter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N:None Normal black-and-white image with no filter effects. Ye:Yellow Blue sky will look more natural, and white clouds will look crisper. Or:Orange The blue sky will look slightly darker.
Page 200: Picture Style Registration
Picture Style Registration You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1] – [User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software) can also be modified here.
Page 201 Press < >. With [Picture Style] selected, press < >. Select a base Picture Style. Select the base Picture Style, then press < >. Also select styles this way when adjusting styles registered to the camera with EOS Utility (EOS software). Select an option.
Page 202 Set the effect level. Adjust the effect level, then press < >. For details, see Picture Style Customization. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def. *]. Blue style names in [User Def.
Page 203: Clarity
Clarity You can adjust image clarity, as determined by the contrast of image edges. Set toward the negative end to make images look softer or toward the positive end for a sharper appearance. Select [ : Clarity]. Set the effect level. Caution Setting clarity may darken or lighten the areas around boundaries in high-contrast images.
Page 204: Lens Aberration Correction
Lens Aberration Correction Peripheral Illumination Correction Distortion Correction Digital Lens Optimizer Chromatic Aberration Correction Diffraction Correction Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. Select [ : Lens aberration correction].
Page 205 Select a setting. Confirm that the name of the attached lens and (except for diffraction correction) [Correction data available] are displayed. If [Correction data not available] or [ ] is displayed, see Digital Lens Optimizer. Caution Not available when shooting multiple exposures. Peripheral Illumination Correction Vignetting (dark image corners) can be corrected.
Page 206 Distortion Correction Distortion (image warping) can be corrected. Caution To correct distortion, the camera captures a narrower image area than the area seen in viewfinder shooting, which crops the image a little and slightly lowers the apparent resolution. Applying distortion correction may change the angle of view slightly.
Page 207 Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of resolution. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual.
Page 208 Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. Note [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is set to [Standard] or [High].
Page 209 General precautions for lens aberration correction Lens aberration correction cannot be applied to existing JPEG images. When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed. Magnifying the periphery of the image may display parts of the image that will not be recorded.
Page 210 Note General notes for lens aberration correction Effects of lens aberration correction vary by lens and shooting conditions. Also, the effect may be difficult to discern depending on the lens used, shooting conditions, etc. If the correction is difficult to discern, magnifying and checking the image after shooting is recommended.
Page 211: Long Exposure Noise Reduction
Long Exposure Noise Reduction Noise that tends to occur in long exposures at shutter speeds of one sec. or slower can be reduced. Select [ : Long exp. noise reduction]. Set a reduction option. Auto For images exposed for 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected.
Page 212 Caution With [Auto] or [Enable] set, noise reduction after you shoot may take as long as exposure for the shot. Images may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting. [BUSY] is displayed as noise is reduced, and the shooting screen is not displayed until processing is finished, when you can shoot again.
Page 213: High Iso Speed Noise Reduction
High ISO Speed Noise Reduction You can reduce the image noise generated. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. Select [ : High ISO speed NR].
Page 214 Caution Precautions on Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. Be careful about camera shake in handheld shots. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
Page 215: Dust Delete Data Acquisition
Dust Delete Data Acquisition Preparation Dust Delete Data Appending Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically.
Page 216 Select [OK]. After the automatic self-cleaning of the sensor is performed, a message will appear. Although there will be a mechanical sound of the shutter during the cleaning, no picture is taken.
Page 217 Shoot a plain white object. Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). Since the image will not be saved, the data can still be obtained even if there is no card in the camera.
Page 218 Dust Delete Data Appending The camera will append the Dust Delete Data obtained to all shots from now on. Acquiring Dust Delete Data before shooting is recommended. For details about using Digital Photo Professional (EOS software) to erase dust spots automatically, refer to the Digital Photo Professional Instruction Manual.
Page 219: Multiple Exposures
Multiple Exposures Merging Multiple Exposures with a RAW Image Recorded on the Card Checking and Deleting Multiple Exposures During Shooting As you shoot multiple exposures (2–9), you can see how the images will be merged into a single image. Select [ : Multiple exposure].
Page 220 Set [Multiple exposure]. Select an option, then press < >. To exit shooting multiple exposures, select [Disable]. On:Func/Ctrl Convenient when shooting multiple exposures gradually as you check the results. During continuous shooting, the continuous shooting speed will decrease greatly. On:ContShtng Used for continuous multiple exposures of moving subjects.
Page 221 Set [Multi-expos ctrl]. Select a merging option, then press < >. Additive The exposure of each single image captured is added cumulatively. Based on [No. of exposures], set negative exposure compensation. Follow these basic guidelines to set the exposure compensation amount.
Page 222 Set [No. of exposures]. Select the number of exposures, then press < >. Specify the images to save. To save all single exposures and the multiple-exposure image, select [All images] and press < >. To save only the multiple-exposure image, select [Result only] and press <...
Page 223 Set [Continue Mult-exp]. Select an option, then press < >. With [1 shot only], multiple-exposure shooting will be canceled automatically after the shooting ends. With [Continuously], multiple-exposure shooting continues until the setting in step 2 is set to [Disable]. Shoot the first exposure. When [On:Func/Ctrl] is set, the captured image will be displayed.
Page 224 Shoot the next exposures. Images captured so far are displayed merged. For only image display, press the < > button repeatedly. As you shoot, you can view the multiple-exposure image so far, check exposure, and see how the images will be merged by holding down the depth-of-field preview button (or the button assigned to [Depth-of-field preview] in [ : Customize buttons]).
Page 225 Caution The image quality, ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the first single exposure will also be set for the subsequent exposures. If [ : Picture Style] is set to [Auto], [Standard] will be applied for shooting. With [On:Func/Ctrl] and [Additive] set, any noise, irregular colors, banding, or similar issues affecting images displayed as you shoot may look different in the final multiple-exposure image.
Page 226 Select the first image. Turn the < > dial to select the first image, then press < >. Select [OK]. The file number of the selected image will be displayed at the bottom of the screen. Take the picture. When you select the first image, the number of remaining exposures as set with [No.
Page 227 Note You can also select a RAW image used in multiple-exposure shooting. Select [Deselect img] to cancel image selection.
Page 228 Checking and Deleting Multiple Exposures During Shooting To view the multiple-exposure image so far, check exposure, and see how the images are merged, you can press the < > button before you finish shooting your specified number of exposures (when [On:Func/Ctrl] is set, but not with [On:ContShtng]). Pressing the <...
Page 229 How are multiple-exposure files numbered? With the camera set to save all images, multiple-exposure image files are named with the next number after the number of the last single exposure used to create them. Will auto power off take effect during multiple-exposure shooting? During multiple-exposure shooting, auto power off will not take effect.
Page 230: Hdr Mode
HDR Mode Effects You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. With HDR shooting, three images of different exposures (standard exposure, underexposure, and overexposure) are captured consecutively for each shot and then merged together automatically.
Page 231 Set [Effect]. Effects for details on the settings and effects. Set [Continuous HDR]. With [1 shot only], HDR shooting is canceled automatically after you finish shooting. With [Every shot], HDR shooting continues until the setting in step 2 is set to [Disable HDR]. Set [Auto Image Align].
Page 232 Specify the images to save. To save the three images captured and the resulting HDR image, select [All images]. To save only the HDR image, select [HDR img only]. Take the picture. When you press the shutter button completely, three consecutive images will be captured, and the HDR image will be recorded to the card.
Page 233 Caution RAW HDR images are captured in JPEG image quality. RAW+JPEG HDR images are captured in the specified JPEG image quality. Expanded ISO speeds (L, H) are not available in HDR shooting. HDR shooting is possible within ISO 100–51200 (varies depending on the settings of [Minimum] and [Maximum] for [ISO speed range]).
Page 234 Effects ] Natural For images preserving a wide tonal range where the highlight and shadow details would otherwise be lost. Clipped highlights and shadows will be reduced. ] Art standard While the clipped highlights and shadows will be reduced more than with [Natural], the contrast will be lower, and the gradation flatter to have the picture look like a painting.
Page 235: Focus Bracketing
Focus Bracketing Focus bracketing enables continuous shooting with the focal distance changed automatically after a single shot. From these images, you can create a single image in focus over a wide area by using an application that supports depth compositing, such as Digital Photo Professional (EOS software).
Page 236 Set [Number of shots]. Specify the number of images captured per shot. Can be set in a range of [2]–[999]. Set [Focus increment]. Specify how much to shift the focus. This amount is automatically adjusted to suit the aperture value at the time of shooting. Larger aperture values increase the focus shift and make focus bracketing cover a wider range under the same focus increment and number of shots.
Page 237 Set [Exposure smoothing]. You can suppress changes in image brightness during focus bracketing by setting [Exposure smoothing] to [Enable], which compensates for differences between the displayed and actual aperture value (effective f/number), which varies by focal position. Take the picture. To save your shots in a new folder, tap [ ] and select [OK].
Page 238 Shooting with a wider angle of view is recommended. After depth compositing, you can crop the image if necessary. For details on lenses compatible with this feature, visit the Canon website. Set [Exposure smoothing] to [Disable] with the following lenses, because they may cause changes in image brightness.
Page 239: Interval Timer Shooting
Interval Timer Shooting With the interval timer, you can set the shooting interval and number of shots, so that the camera takes individual shots repeatedly according to your interval until your specified number of shots are taken. Select [ : Interval timer]. Select [Enable].
Page 240 Set the shooting interval and number of shots. Select an option to set (hours : minutes : seconds / number of shots). Press < > to display [ ]. Set the desired number, then press < >. (Returns to [ Interval Can be set in a range of [00:00:01]–[99:59:59].
Page 241 Take the picture. First shot is taken and shooting continues according to the interval timer settings. During interval timer shooting, [ ] will blink. After the set number of shots are taken, the interval timer shooting will stop and be automatically canceled. Note Using a tripod is recommended.
Page 242 Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Setting the lens's focus mode switch to < >...
Page 243: Shutter Mode
Shutter Mode You can choose the method of shutter release. Select [ : Shutter mode]. Select an option. Mechanical Shooting activates the mechanical shutter. Recommended when shooting with the aperture of a bright lens wide open. Elec. 1st-curtain Shooting only activates the second-curtain shutter. Electronic Enables you to shoot without a shutter sound.
Page 244 Zooming during continuous shooting may cause changes in exposure even at the same f/number. For details, refer to the Canon website. [Elec. 1st-curtain] is used for bulb exposures. AEB shooting and flash photography are not available.
Page 245: Releasing Shutter Without Card
Releasing Shutter without Card You can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable]. Select [ : Release shutter without card]. Select [Disable].
Page 246: Shooting With The Touch Shutter
Shooting with the Touch Shutter Just by tapping the screen, you can focus and take the picture automatically. Enable the Touch Shutter. Tap [ ] in the lower left of the screen. Each time you tap the icon, it will toggle between [ ] and [ ] (Touch Shutter: Enable) The camera will focus on the spot you tap, then the picture will be...
Page 247 Tap the screen to shoot. Tap the face or subject on the screen. On the point you tap, the camera focuses (Touch AF) with your specified method. When [ ] is set, the AF point turns green when focus is achieved, then the picture is taken automatically.
Page 248: Image Review
Image Review Review Duration Viewfinder Review Review Duration To keep the image displayed immediately after you shoot, set to [Hold], and if you prefer not to have the image displayed, set to [Off]. Select [ : Image review]. Select [Review duration]. Set a time option.
Page 249 Note When [Hold] is set, images are displayed as long as the time set in the [Display off] option of [ : Power saving].
Page 250 Viewfinder Review Set to [Enable] for viewfinder display of your shots immediately after you shoot. Select [ : Image review]. Select [Viewfinder review]. Select an option. Note [Viewfinder review] settings take effect when [Image review] is set to an option other than [Off].
Page 251: High-Speed Display
High-Speed Display High-speed display that switches between each shot and the live image is available when shooting with the drive mode set to [ ]. Display is more responsive, making it easier to follow fast-moving subjects. Select [ High speed display]. Select an option.
Page 252 Note High-speed display is always used when [ : Shutter mode] is set to [Electronic].
Page 253: Metering Timer
Metering Timer You can set how long the metering timer runs (which determines the duration of exposure value display/AE lock) after it is triggered by an action such as pressing the shutter button halfway. Select [ : Metering timer]. Set a time option.
Page 254: Exposure Simulation
Exposure Simulation With exposure simulation, image brightness more closely matches the actual brightness (exposure) of your shots. Select [ : Expo. simulation]. Set an option. Enable ( The displayed image brightness will be close to the actual brightness (exposure) of the resulting image.
Page 255: Shooting Information Display
Shooting Information Display Customizing Information on the Screen Customizing Information in the Viewfinder Viewfinder Vertical Display Grid Histogram Setting Focus Distance Display Clearing Settings You can customize the details and screens of information shown on the screen or in the viewfinder when you shoot.
Page 256 Select [Screen info. settings]. Select screens. Turn the < > dial to select screens of information to show on the camera. For information you prefer not to display, press < > to clear the checkmark [ ]. To edit the screen, press the < >...
Page 257 Edit the screen. Turn the < > dial to select options to show on the screen of information. For items you prefer not to display, press < > to clear the checkmark [ ]. Select [OK] to register the setting.
Page 258 Customizing Information in the Viewfinder Select [ : Shooting info. disp.]. Select [VF info/toggle settings]. Select screens. Turn the < > dial to select screens of information to show on the camera. For information you prefer not to display, press < >...
Page 259 Edit the screen. Turn the < > dial to select options to show on the screen of information. For items you prefer not to display, press < > to clear the checkmark [ ]. Select [OK] to register the setting.
Page 260 Viewfinder Vertical Display You can select how viewfinder information is displayed when you are shooting still photos vertically. Select [ : Shooting info. disp.]. Select [VF vertical display].
Page 261 Select an option. Information is automatically rotated, making it easier to read. Information is not automatically rotated.
Page 262 Grid A grid can be displayed on the screen and viewfinder. Select [ : Shooting info. disp.]. Select [Grid display]. Select an option.
Page 263 Histogram You can select the content and display size of the histogram. Select [ : Shooting info. disp.]. Select [Histogram disp]. Select an option. Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]).
Page 264 Setting Focus Distance Display You can display focus distance when using RF lenses. In focus distance display, you can select the timing and unit of measurement. Select [ : Shooting info. disp.]. Select [Focus distance disp]. Select the timing of display.
Page 265 Select the unit of measurement. Note For certain RF lenses, magnification is also displayed.
Page 266 Clearing Settings Select [ : Shooting info. disp.]. Select [Reset]. Select [OK].
Page 267: Viewfinder Display Format
Viewfinder Display Format Select [ : VF display format]. Select an option.
Page 268: Display Performance
Display Performance You can select the performance parameter to prioritize in shooting screen display for still photos. Select [ : Disp. performance]. Select an option. When set to [Smooth] By pressing the < > button to add a checkmark, you can include low-light locations in the scenarios for suppressing lower display frame rates.
Page 269 Caution Shooting under low light with [Suppress lower frame rate] set for shooting screen display may affect performance as follows. • Faster battery consumption • Fewer shots available • Lower image display brightness • Difficulty in autofocusing • Lower metering precision •...
Page 270: Metering Mode Selection
Metering Mode Selection You can select one of four methods to measure the subject brightness. In [ ] mode, evaluative metering is set automatically. Press the < > button ( With an image displayed, press the < > button. Select the metering mode. To select an item, turn the <...
Page 271 Center-weighted average The metering across the screen is averaged, with the center of the screen weighted more heavily. Note By default, the camera will set the exposure as follows. With [ ], holding down the shutter button halfway locks the exposure value (AE lock) after the camera focuses with One-Shot AF.
Page 272: Manual Exposure Compensation
Manual Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation is available in [ ], [ ], [ ], [ ], and [ ] modes. For details on exposure compensation when [ ] mode and ISO Auto are both set, see Manual Exposure, and see...
Page 273 Note The exposure compensation amount will remain in effect even after you set the power switch to < >.
Page 274: Exposure Lock (Ae Lock)
Exposure Lock (AE Lock) AE Lock Effects You can lock the exposure when you want to set the focus and exposure separately or when you will take multiple shots at the same exposure setting. Press the < > button to lock the exposure, then recompose and take the picture.
Page 275 Recompose and take the picture. When you are to take more pictures while maintaining the AE lock, keep holding down the < > button and press the shutter button to take another picture. Note AE lock is not possible with bulb exposures. AE Lock Effects AF point selection Metering Mode...
Page 276: General Still Photo Shooting
General Still Photo Shooting Information Display General Still Photo Shooting Precautions Information Display For details on the icons displayed for still photo shooting, see Information Display. Note White display of the [ ] icon indicates that your shots will be about as bright as the image displayed.
Page 277 General Still Photo Shooting Precautions Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Image quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable.
Page 278 Images and display Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. Although noise may be noticeable in images under low light (even at low ISO speeds), there will be less noise in your shots, due to differences in image quality between displayed and captured images.
Page 279: Af/Drive
AF/Drive This chapter describes autofocus operation and drive modes and introduces menu settings on the AF [ ] tab. to the right of titles indicates functions only available in [ ], [ ], [ ], [ ], [ ], or ] mode.
Page 280: Tab Menus: Af (Still Photos)
Tab Menus: AF (Still Photos) AF operation AF method Subject to detect Eye detection Continuous AF Touch & drag AF settings Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab. MF peaking settings Focus guide AF-assist beam firing...
Page 281 Case 1 Case 2 Case 3 Case 4 Case A Tracking sensitivity Accel./decel. tracking Lens electronic MF One-Shot AF release prior. Switching tracked subjects Lens drive when AF impossible Limit AF methods AF method selection control Orientation linked AF point...
Page 282 Initial Servo AF pt for Focus ring rotation RF lens MF focus ring sensitivity sensitivity- AF pt select Electronic full-time MF In [ ] mode, the following screens are displayed. Subject to detect Eye detection Continuous AF Touch & drag AF settings Focus guide AF-assist beam firing...
Page 283 Focus ring rotation RF lens MF focus ring sensitivity sensitivity- AF pt select...
Page 284: Af Operation
AF Operation One-Shot AF for Still Subjects Servo AF for Moving Subjects You can select the AF operation characteristics to suit the shooting conditions or subject. Set the lens's focus mode switch to < >. Select [ : AF operation]. Select an option.
Page 285 Note If focus is not achieved, the AF point will turn orange. With One-Shot AF, shooting is not possible even by pressing the shutter button completely. Recompose the shot and try to focus again. Or, see Shooting Conditions That Make Focusing Difficult.
Page 286 One-Shot AF for Still Subjects This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture.
Page 287 Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. When focus is achieved, the AF point will turn blue. The beeper will not sound even when focus is achieved.
Page 288: Selecting The Af Method
Selecting the AF Method AF Method Selecting the AF Method (Face)+Tracking: Subject to Detect Eye Detection Spot AF / 1-Point AF / Expand AF Area: / Expand AF Area: Around / Zone AF / Large Zone AF: Vertical / Large Zone AF: Horizontal Magnified View AF Shooting Tips Shooting Conditions That Make Focusing Difficult...
Page 289 With Servo AF, you can set the initial position for Servo AF ( ). As long as the Area AF frame can track the subject during shooting, focusing will continue. : Spot AF The camera focuses in a narrower area than 1-point AF. : 1-point AF The camera focuses using a single AF point [...
Page 290 : Expand AF area: Focuses using one AF point [ ] and AF points outlined here in blue. Effective for moving subjects, which are difficult to track with 1-point AF. Focusing on your preferred subject is easier than with Zone AF. When Servo AF is used, first you will focus using an AF point [ : Expand AF area: Around Focuses using one AF point [...
Page 291 : Zone AF Uses auto selection AF in Zone AF frames to cover a larger area than Expand AF area, which makes focusing easier than with Expand AF area. Focusing areas are determined not only based on the nearest subject but also based on a variety of other conditions such as faces (of people or animals), subject motion, and subject distance.
Page 292 : Large Zone AF: Horizontal Uses auto selection AF in a horizontal Large Zone AF frame to cover a larger area than Zone AF, which makes focusing easier than with 1-point AF/Expand AF area and also effective for moving subjects. Focusing areas are determined not only based on the nearest subject but also based on a variety of other conditions such as faces (of people or animals), subject motion, and subject distance.
Page 293 Selecting the AF Method You can select the AF method to suit the shooting conditions or subject. If you prefer to focus manually, see Manual Focus. Select [ : AF method]. Select the AF method. Note In [ ] mode, [ +Tracking] is set automatically.
Page 294 (Face)+Tracking: The camera detects and focuses on faces of people or animals. If a face moves, the AF point [ ] also moves to track the face. You can set [ : Eye detection] to [Enable] to shoot with the subject's eyes in focus ( Check the AF point.
Page 295 Focus and take the picture. Once you press the shutter button halfway and the subject is in focus, the AF point turns green and the camera beeps. An orange AF point indicates that the camera could not focus on subjects. Note Selecting the face of a person or animal manually by tapping the screen or using <...
Page 296 Caution Tapping the screen to focus will focus with [One-Shot AF], regardless of the AF operation setting. If the subject's face is significantly out of focus, face detection will not be possible. Adjust the focus manually ( ) so that the face can be detected, then perform AF. Objects other than a human face or animal face or body may be detected.
Page 297 Set the AF point. An Area AF frame (1) and AF point (2) are displayed. To move the AF point into position for focusing, press the < > button and then use < >, or tap the screen, then press < >.
Page 298 Subject to Detect You can specify conditions for automatic selection of the main subject to track. Takes effect when the AF method is Face+Tracking, Zone AF, or Large Zone AF (vertical or horizontal). People Prioritizes the faces or heads of people as the main subjects to track. When a person's face or head cannot be detected, the camera attempts to detect and track their torso.
Page 299 Caution The camera may detect areas other than faces or bodies of people or animals or key details or bodies of vehicles as subjects. Faces that are very small or large in the picture, too bright or dark, or partly hidden cannot be detected.
Page 300 Eye Detection With the AF method set to [ +Tracking], you can shoot with the eyes of people or animals in focus. Select [ : Eye detection]. Select [Enable].
Page 301 Aim the camera at the subject. An AF point is displayed around their eye. To choose an eye to focus on, press the < > button to change the AF point to [ ], then use < >. As you use < >, the AF point changes again to [ You can also tap the screen to choose an eye.
Page 302 Spot AF / 1-Point AF / Expand AF Area: / Expand AF Area: Around / Zone AF / Large Zone AF: Vertical / Large Zone AF: Horizontal You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example.
Page 303 Move the AF point. Press the < > button, use < > to move the AF point into position for focusing, then press < > (but note that with some lenses, it may not move to the edge of the screen). To center the AF point while using <...
Page 304 Caution The camera continues to switch the active AF point [ ] to track subjects when Zone AF or Large Zone AF (vertical or horizontal) is set to Servo AF, but tracking may not be possible under some shooting conditions, such as when subjects are small.
Page 305 Magnified View To check the focus when the AF method is other than [ +Tracking], magnify display by approx. 6× or 15× by pressing the < > button (or tapping [ Magnification is centered on the AF point for [Spot AF], [1-point AF], [Expand AF area: ], and [Expand AF area: Around] and on the Zone AF frame for [Zone AF], [Large Zone AF: Vertical], and [Large Zone AF: Horizontal].
Page 306 AF Shooting Tips Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change before and after autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult.
Page 307 Shooting Conditions That Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.).
Page 308 AF Range The available autofocus range varies depending on the lens, aspect ratio, and image quality used.
Page 309: Continuous Af
Continuous AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. Select [ : Continuous AF]. Select [Enable]. Caution Fewer shots are available when set to [Enable], because the lens is driven continuously and battery power is consumed.
Page 310: Touch & Drag Af Settings
Touch & Drag AF Settings Touch & Drag AF Positioning Method Active Touch Area You can move the AF point or Zone AF frame by tapping or dragging on the screen as you look through the viewfinder. Touch & Drag AF Select [ : Touch &...
Page 311 Positioning Method You can set how positions are specified by tapping or dragging. Set [Positioning method]. Absolute The AF point moves to the tapped or dragged position on the screen. Relative The AF point moves in the direction you drag, by an amount corresponding to the amount you drag, no matter where you tap the screen.
Page 312 Active Touch Area You can specify the area of the screen used for tap and drag operations. Set [Active touch area]. Note Tapping the screen when [ +Tracking] is set displays a round orange frame [ After you lift your finger at the position to move the AF point to, [ ] is displayed and that subject is tracked.
Page 313: Manual Focus
Manual Focus Setting MF Peaking (Outline Emphasis) Focus Guide AF-Assist Beam Firing If focusing is not possible with autofocus, you can magnify the image and focus manually. Set the lens's focus mode switch to < >. Turn the lens focusing ring to set the approximate focus. Magnify the image.
Page 314 Move the magnified area. Use < > to move the magnified area into position for focusing. To center the magnified area, press < > straight in or press < >. Focus manually. While looking at the magnified image, turn the lens focusing ring to focus.
Page 315 Setting MF Peaking (Outline Emphasis) Edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection. Select [ : MF peaking settings]. Select [Peaking]. Select [On].
Page 316 Caution In magnified view, peaking display is not shown. During HDMI output, peaking display is not shown on equipment connected via HDMI. Note that peaking display is shown on the camera screen when [ : HDMI display] is set to [ MF peaking may be hard to discern at high ISO speeds, especially when ISO expansion is set.
Page 317 Focus Guide Setting [Focus guide] to [On] provides a guide frame that shows which direction to adjust focus and the extent of adjustment needed. The guide frame is displayed near any eyes that are detected for the main subject when [ : AF method] is set to [ +Tracking] and [ Eye detection] is set to [Enable].
Page 318 The guide frame indicates the current position in focus and adjustment amount as follows. Significantly out of focus toward infinity Slightly out of focus toward infinity In focus Slightly out of focus toward close range Significantly out of focus toward close range...
Page 319 Adjustment information not detected Caution Under difficult shooting conditions for AF ( ), the guide frame may not be displayed correctly. Higher aperture values are more likely to prevent correct guide frame display. No AF points are displayed while the guide frame is displayed. The guide frame is not displayed in these situations.
Page 320 AF-Assist Beam Firing You can enable or disable AF-assist beam firing of the camera or a Speedlite for EOS cameras. Select [AF-assist beam firing]. Select an option. [ON] Enable Enables firing of the AF-assist beam, when needed. [OFF] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire the AF-assist beam.
Page 321 Caution If a Speedlite's [AF-assist beam firing] Custom Function is set to [Disable], the AF-assist beam will not be emitted.
Page 322: Servo Af Characteristics
Servo AF Characteristics Case Details Case 1: Versatile Multi-Purpose Setting Case 2: Continue to Track Subjects, Ignoring Possible Obstacles Case 3: Instantly Focus on Subjects Suddenly Entering AF Points Case 4: For Subjects That Accelerate or Decelerate Quickly Case A: Tracking Automatically Adapts to Subject Movement Parameters Adjusting Case Parameters Shooting with AI Servo AF/Servo AF can be easily tailored to your subjects or shooting...
Page 323 Case Details Cases 1 to A are five combinations of settings for “Tracking sensitivity” and “Accel./decel. tracking.” Referring to the following table, select the case for your subject and shooting situation. Examples of Shooting Case Icon Description Situations Case 1 Versatile multi purpose setting Moving subjects in general Continue to track subjects,...
Page 324 Case 1: Versatile Multi-Purpose Setting Default • Tracking sensitivity: 0 • Accel./decel. tracking: 0 Standard setting suited to moving subjects in general. Suitable for many kinds of subjects and scenes. In the following situations, select [Case 2] to [Case 4] instead: non-subjects moving across AF points, elusive subjects, or subjects that suddenly appear or change speed.
Page 325 Case 2: Continue to Track Subjects, Ignoring Possible Obstacles Default • Tracking sensitivity: Locked on: –1 • Accel./decel. tracking: 0 Setting to continue focusing on the subject even if non-subjects move across AF points, or if the subject strays from AF points. Effective if you prefer the focus not to switch to non- subjects or the background.
Page 326 Case 3: Instantly Focus on Subjects Suddenly Entering AF Points Default • Tracking sensitivity: Responsive: +1 • Accel./decel. tracking: +1 Setting to focus on a series of subjects at different distances in the AF points, one after another. Focus switches to any new subject that appears in front of the target subject. Also effective when you want to always focus on the closest subject.
Page 327 Case 4: For Subjects That Accelerate or Decelerate Quickly Default • Tracking sensitivity: Responsive: 0 • Accel./decel. tracking: +1 Setting to keep tracking and focusing on subjects even if they suddenly change speed. Effective for subjects having sudden movements, sudden acceleration/deceleration, or sudden stops.
Page 328 Case A: Tracking Automatically Adapts to Subject Movement Useful when you prefer to shoot with parameters set automatically, based on how subjects change. Tracking sensitivity and acceleration/deceleration tracking are set automatically.
Page 329 Parameters Tracking sensitivity Setting for Servo AF subject-tracking sensitivity in response to non-subjects moving across AF points or subjects straying from AF points. Standard setting. Suitable for moving subjects in general. Locked on: –2 / Locked on: –1 The camera will try to continue focusing on the subject even if non-subjects move across AF points or if the subject strays from the AF points.
Page 330 Accel./decel. tracking Setting for AI Servo AF/Servo AF subject-tracking sensitivity in response to sudden, significant changes in speed, as when subjects suddenly start or stop moving. Suited for subjects that move at a steady speed (minor changes in moving speed). –2 / –1 Suited for subjects that move at a steady speed (minor changes in moving speed).
Page 331 Adjusting Case Parameters You can manually adjust the parameters ((1) Tracking sensitivity and (2) Acceleration/ deceleration tracking) for cases 1 to 4. Select a case. Turn the < > dial to select the number of a case to adjust. Press the < >...
Page 332 Make the adjustment. Default settings are indicated by a light gray [ ] icon. To confirm the adjustment, press < >. To return to the screen in step 1, press the < > button. Note To restore default parameter settings for (1) and (2) to each case, press the <...
Page 333: Customizing Af Functions
Customizing AF Functions [AF4] [AF5] You can configure AF functions in detail to suit your shooting style or subject. Lens electronic MF For RF, EF, or EF-S lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF. ] Disable after One-Shot After the AF operation, manual focusing adjustment is disabled.
Page 334 ] One-Shot→enabled (magnify) You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway. You can magnify the area in focus and adjust the focus manually by turning the lens focusing ring. ] Disable in AF mode Manual focus adjustment is disabled when the lens's focus mode switch is set to <...
Page 335 One-Shot AF release prior. You can specify whether to prioritize focus or release timing for One-Shot AF (except when shooting with Touch Shutter). ] Focus The picture will not be taken until focus is achieved. Useful when you want to achieve focus before capturing the image.
Page 336 Switching tracked subjects You can specify how easily the camera switches AF points to track subjects. Applies to Face+Tracking, Zone AF, or Large Zone AF (vertical or horizontal) AF methods. • Initial priority Tracks the subject initially determined for AF, to the extent possible. •...
Page 337 Lens drive when AF impossible You can specify lens operation that applies when autofocusing on a subject is not possible. ] Continue focus search If focus cannot be achieved with autofocus, the lens is driven to search for the precise focus.
Page 338 Limit AF methods You can limit the AF methods available to those that you will use. Select AF methods and press < > to add a checkmark [ ] and make them available. Select [OK] to register the setting. For details on AF methods, see Method.
Page 339 AF method selection control You can set how AF method selection methods are switched. →M-Fn button Press the < > button, then the < > button. Each press switches the AF method. →Main Dial Press the < > button, then turn the < >...
Page 340 Orientation linked AF point You can set separate AF points or Zone AF frames to use in vertical and horizontal shooting. ] Same for both vert/horiz The same AF points or Zone AF frames are used in both vertical and horizontal shooting.
Page 341 Initial Servo AF pt for You can set the initial AF point for Servo AF when the AF method is set to [ +Tracking]. Initial AF pt set for Servo AF starts from the manually set AF point when AF operation is set to [Servo AF] and the AF method is set to [ +Tracking].
Page 342 Focus ring rotation You can reverse the direction that the focusing ring of RF lens is rotated to adjust settings. ] Normal ] Reverse direction RF lens MF focus ring sensitivity You can set the sensitivity of the RF lens focusing ring. ] Varies with rotation speed Focusing ring sensitivity varies depending on rotation speed.
Page 343 sensitivity- AF pt select You can adjust Multi-controller sensitivity, which applies to AF point positioning.
Page 344 Electronic full-time MF Operation of manual focus adjustment using the electronic focusing ring when certain lenses are attached is customizable. Check the Canon website for compatible lenses. Enable Manual focus adjustment is available whenever the camera is on. Disable Operation of manual focus adjustment corresponds to the [Lens electronic MF] setting.
Page 345: Selecting The Drive Mode
Selecting the Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. Press the < > button ( With an image displayed on the screen, press the < > button. Select the drive mode item.
Page 346 Select the drive mode. Turn the < > dial to make a selection. ] Single shooting When you hold down the shutter button completely, only one shot will be taken. ] High-speed continuous shooting + When you hold down the shutter button completely, you can shoot continuously at max. approx.
Page 347 Caution Approx. 12 shots/sec. continuous shooting speed with [ ] is available under the following conditions. • Room temperature (23°C/73°F) • Battery level (LP-E6NH): At least approx. 60% (or using an optional Battery Grip BG-R10, a battery level of at least approx. 60% with two LP-E6NH) •...
Page 348: Using The Self-Timer
Using the Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. Press the < > button ( With an image displayed on the screen, press the < > button. Select the drive mode item. Turn the <...
Page 349 Take the picture. Focus on the subject, then press the shutter button completely. To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. Self-timer lamp blinking accelerates and the camera beeps quickly approx.
Page 350: Remote Control Shooting
Remote Control Shooting Remote Controller RC-6 Wireless Remote Control BR-E1 Remote Switch RS-80N3/TC-80N3 For remote control shooting, you can use an optional Remote Controller RC-6 (infrared) or Wireless Remote Control BR-E1 (Bluetooth), or an optional Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (both wired). Remote Controller RC-6 You can shoot remotely up to approx.
Page 351 Select the self-timer/remote control. Turn the < > dial to select the drive mode item, then turn the < > dial to select [ ] or [ Press the release (transmit) button on the remote controller. Point the remote controller toward the camera's remote control sensor (1), then press the release (transmit) button.
Page 352 Caution Infrared remote controllers such as the RC-6 cannot be used for remote control shooting when the camera is paired via Bluetooth with a smartphone or wireless remote control. Fluorescent or LED lighting may trigger accidental shutter release. Try to keep the camera away from these light sources.
Page 353 Wireless Remote Control BR-E1 You can shoot remotely up to approx. 5 meters/16.4 feet from the camera. After pairing the camera and BR-E1 ( ), set the drive mode to [ ] or [ ] for still photo shooting ( For operating instructions, refer to the BR-E1 instruction manual.
Page 354 Remote Switch RS-80N3/TC-80N3 Once connected to the camera, the switch enables you to shoot remotely over a wired connection. For operating instructions, refer to the accessory instruction manual. Open the terminal cover. Connect the plug to the remote control terminal.
Page 355: Playback
Playback This chapter covers topics related to playback—playing back captured still photos—and introduces menu settings on the playback ([ ]) tab. Caution Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer.
Page 356: Tab Menus: Playback
Tab Menus: Playback Playback 1 Protect images Erase images Rotate stills Rating Image copy Playback 2 Print order Photobook Set-up...
Page 357 Playback 3 RAW processing (RAW/DPRAW) DPRAW processing Resize Cropping HEIF→JPEG conversion Caution : RAW processing (RAW/DPRAW)], [ : DPRAW processing], and [ HEIF→JPEG conversion] are not displayed in [ ] mode. Playback 4 Slide show Set image search conditions Magnificatn (apx) Image jump w/ Switch button function...
Page 358 Playback 5 Playback information display Highlight alert AF point disp. Playback grid HDMI HDR output...
Page 359: Image Playback
Image Playback Single-Image Display Shooting Information Display Touch Playback Single-Image Display Switch to playback. Press the < > button. The last image captured or played back is displayed.
Page 360 Browse images. To play back images starting with your most recent shot, turn the < > dial counterclockwise. To play back images starting with the first captured image, turn the dial clockwise. Each time you press the < > button, the display will change. No information Basic information display Shooting information display...
Page 361 Note Lines indicating the image area are shown on RAW images captured with [ Cropping/aspect ratio] set to [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] ( If the search conditions are set with [ : Set image search conditions] ( ), only the filtered images will be displayed.
Page 362 Shooting Information Display With the shooting information screen displayed ( ), you can press < > up or down to view other information. You can also customize the information displayed, in [ : Playback information display] (...
Page 363 Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the < > button to prepare for touch playback. Browse images Jump display Index display...
Page 364 Magnified view Note You can also magnify display by double-tapping with one finger.
Page 365: Magnified Image Display
Magnified Image Display Setting the Initial Magnification Ratio and Position You can magnify display of your captured images. Magnify the image. Turn the < > dial clockwise. The magnified view will appear. The position of the magnified area (1) is displayed in the lower right of the screen, along with [ To magnify images, turn the <...
Page 366 Scroll the image. Use < > to scroll around the magnified image. Press the < > or < > button to exit magnified view. Note To switch to other images while maintaining magnified view, turn the < > dial.
Page 367 Setting the Initial Magnification Ratio and Position You can set the initial magnification ratio and magnified position by selecting [ Magnificatn (apx)]. 2x, 4x, 8x, 10x (magnify from center) The magnified view starts at the image center at the selected magnification ratio. Actual size (from selected pt) The recorded image's pixels will be displayed at approx.
Page 368: Index Display (Multiple-Image Display)
Index Display (Multiple-Image Display) Switch to the index display. During image playback, turn the < > dial counterclockwise. The 4-image index display will appear. The selected image is highlighted with an orange frame. Turning the < > dial further counterclockwise will switch the display from 9 to 36 to 100 images.
Page 370 Browse images. Use < > or the < > dial to move the orange frame for image selection. Press < > in the index display to display the selected image in the single-image display.
Page 371: Voice Memo Recording And Playback
Voice Memo Recording and Playback Recording Voice Memos Memo Audio Quality Playing Voice Memos You can add (record) voice memos to your shots. Voice memos are recorded as WAV audio files with the same file number as the image. They can be played back by the camera or a computer.
Page 372 Record a voice memo. Hold down the < > button for approx. 2 sec. Keep holding down the button after [Recording memo...] appears, and speak into the voice memo microphone (1). Each recording can be up to approx. 30 sec. To end the voice memo, release the button.
Page 373 Caution Voice memos cannot be added to protected images. Voice memos cannot be recorded with an external microphone. Note Audio quality of voice memo recording can be changed in [ : Memo audio quality]. To record voice memos longer than 30 sec., repeat step 3. You can record a single voice memo during image review (immediately after shooting) by following step 3.
Page 374 Memo Audio Quality You can set the audio quality for recording voice memos. Select [ : Memo audio quality]. Select an option. 48 kHz: High quality (48 kHz) 8 kHz: Low quality (8 kHz) Enables smaller voice memo file sizes than with [High quality (48 kHz)].
Page 375 Playing Voice Memos Select [ button function]. Select [Play memo(Hold:Rec. memo)]. Select an image for voice memo playback. Press the < > button to switch to image playback. Turn the < > dial to select an image labeled with a [ ] icon at the top of the screen.
Page 376 Play back the voice memo. (1) Speaker Press the < > button to play the voice memo. You can adjust the sound volume by turning the < > dial. To stop playback, press the < > button. Note Multiple voice memos added to an image are played back consecutively. Added voice memos cannot be erased by themselves using the camera.
Page 377: Playback On A Tv Set
Playback on a TV Set By connecting the camera to a television with a commercially available HDMI cable, you can play back the captured still photos on the television. If the image does not appear on the TV screen, confirm that [ : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television).
Page 378 Press the < > button. Images are now displayed on the television, with nothing displayed on the camera screen. The images will automatically be displayed at the optimum resolution matching the connected television. Caution Before connecting or disconnecting the cable between the camera and television, turn off the camera and television.
Page 379: Protecting Images
Protecting Images Protecting Individual Images via the Menu Specifying the Range of Images to Protect Protecting All Images in a Folder or on a Card You can protect important images from being accidentally erased. Caution If you format the card ( ), the protected images will also be erased.
Page 380 Select [Select images]. Select the image to protect. Turn the < > dial to select an image to protect. Protect the image. Press < > to protect the selected image, after which it will be labeled with a [ ] icon (1) at the top of the screen. To cancel protection and clear the [ ] icon, press <...
Page 381 Specifying the Range of Images to Protect While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. Select [Select range]. Select [Select range] in [ : Protect images].
Page 382 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ : Protect images], all the images in the folder or on the card will be protected.
Page 383: Erasing Images
Erasing Images Erasing Images Individually Selecting ([ ]) Multiple Images to Erase Together Specifying the Range of Images to Erase Erasing All Images in a Folder or on a Card You can either select and erase unnecessary images individually or erase them in one batch.
Page 384 Press the < > button. Erase the images. JPEG/HEIF/RAW images Select [Erase]. RAW+JPEG/RAW+HEIF images Select an option. Note You can erase individual images during playback by pressing the < > button when [ button function] is assigned to [Erase images] (...
Page 385 Selecting ([ ]) Multiple Images to Erase Together By adding checkmarks to the images to be erased, you can erase all those images at once. Select [ : Erase images]. Select [Select and erase images]. Select an image. Turn the < >...
Page 386 Erase the images. Press the < > button, then press [OK].
Page 387 Specifying the Range of Images to Erase While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. Select [Select range]. Select [Select range] in [ : Erase images].
Page 388 Erase the images. Select [OK].
Page 389 Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ : Erase images], all the images in the folder or on the card will be erased.
Page 390: Rotating Still Photos
Rotating Still Photos You can use this feature to rotate the displayed image to the desired orientation. Select [ : Rotate stills]. Select an image to rotate. Turn the < > dial to select the image.
Page 391 Rotate the image. Each time you press < >, the image will rotate clockwise as follows: 90°→270°→0°. To rotate another image, repeat steps 2 and 3. Note If you set [ : Auto rotate] to [On ) before taking pictures, you need not rotate the image with this function.
Page 392: Rating Images
Rating Images Rating Individual Images With the < > Button Rating Individual Images via the Menu Rating by Specifying the Range Rating All Images in a Folder or on a Card You can rate images on a scale of 1–5 ( ).
Page 393 Note In the detailed settings for [Rating (Hold: (rec memo))] in [ button function], you can select the rating to apply.
Page 394 Rating Individual Images via the Menu Select [ : Rating]. Select [Select images]. Select the image to be rated. Turn the < > dial to select the image to be rated.
Page 395 Rate the image. Press < >, and a blue highlight frame will appear as shown in the screen shown above. Turn the < > dial to select a rating mark, then press < >. When you append a rating mark to the image, the number beside the set rating will increase by one.
Page 396 Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. Select [Select range]. Select [Select range] in [ : Rating].
Page 397 Rate the images. Turn the < > dial to select a rating mark, then select [OK]. All the images in the specified range will be rated (same rating) at once.
Page 398 Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.
Page 399 Note Values next to ratings are displayed as [###] if more than 1,000 images have that rating. With [ : Set image search conditions] and [ : Image jump w/ ], you can display only the images given a specific rating.
Page 400: Copying Images
Copying Images Copying Individual Images Copying a Range of Images Copying All Images in a Folder or on a Card You can copy the images on one card to the other card to save duplicates. All images in a folder or on a card can also be copied at the same time. Caution If the target folder or card already has an image with the same file number, [Skip image and continue], [Replace existing image], and [Cancel copy] are...
Page 401 Copying Individual Images Select [ : Image copy]. Select [Sel.Image]. Check the source and target card numbers and the free space on the target card. Select [Sel.Image], then press < >.
Page 402 Select the folder. (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Select the source folder, then press < >. When selecting the folder, refer to the images displayed at right of the screen.
Page 403 Press the < > button. Select [OK]. Check the target card, then select [OK]. Select the target folder. Select the folder to copy the image to, then press < >. To create a new folder, select [Create folder].
Page 404 Select [OK]. Check the information about the source and target card, then select [OK]. Results are displayed after copying is finished. Select [OK] to return to the screen in step 2.
Page 405 Copying a Range of Images You can copy all specified images at once by selecting the first and last images in a range as you look at images in the index display. Select [Range]. Select the folder. Select the source folder, then press < >.
Page 406 Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. To select another image to copy, repeat step 3.
Page 407 Copying All Images in a Folder or on a Card You can copy all the images in a folder or on a card at once. Selecting [Sel. ] or [All images] in [ : Image copy] copies all the images it contains.
Page 408: Print Ordering (Dpof)
Print Ordering (DPOF) Print Options Selecting Images for Printing DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc.
Page 409 Set the options as desired. Set [Print type], [Date], and [File No.] options. Standard Prints one image on one sheet. Multiple thumbnail images are printed Index Print type on one sheet. Prints both the standard and index Both prints. [On] imprints the recorded date of the captured Date image.
Page 410 Caution If you print an image with a large image size using the [Index] or [Both] setting ), the index print may not be printed with certain printers. In this case, resize the image ( ), then print the index print. Even if [Date] and [File No.] are set to [On], the date or file number may not be imprinted, depending on the print type setting and printer.
Page 411 Selecting Images for Printing Sel.Image Select and specify the images individually. Press the < > button to save the print order to the card. Standard/Both (1) Quantity (2) Total images selected Press < > to print a copy of the displayed image. By turning the < >...
Page 412 Multiple Select range Select [Select range] in [Multiple]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be specified for printing. All images in a folder Select [Mark all in folder] and select the folder.
Page 413: Photobook Set-Up
Photobook Set-up Specifying Individual Images via the Menu Specifying the Image Range for a Photobook Specifying All Images in a Folder or Card You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder.
Page 414 Select the image to be specified. Use the < > dial to select the image to be specified for a photobook, then press < >. To select other images to be specified for a photobook, repeat step 3.
Page 415 Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. Select [Multiple]. Select [Multiple] in [ : Photobook Set-up].
Page 416 Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images.
Page 417 Specifying All Images in a Folder or Card You can specify all the images in a folder or on a card at once for a photobook. All images in the folder or on the card are specified for the photobook when you select [All images in folder] or [All images on card] in the [Multiple] option for [ : Photobook Set- up].
Page 418: Raw Processing (Raw/Dpraw)
RAW Processing (RAW/DPRAW) Magnified View Processing Images with Specified Aspect Ratios RAW Image Processing Options You can process images with the camera to create JPEG or HEIF images. RAW images are not affected, so different conditions can be applied to create JPEG or HEIF images.
Page 419 Select an option, then select images. You can select multiple images to process at once. Select images Turn the < > dial to select images to process, then press < >. Press the < > button. Select range Select the first image (start point). Next, select the last image (end point).
Page 420 Set the desired processing conditions. Use shot settings Images are processed using image settings at the time of capture. Images captured with [ : HDR PQ settings] set to [Enable] are processed to create HEIFs, and images captured with this function set to [Disable] are processed to create JPEGs.
Page 421 Save. When using [Set up processing→JPEG] or [Set up processing→HEIF], select [ ] (Save). Read the message and select [OK]. To process other images, select [Yes] and repeat steps 2–4. Select the image to display. Select [Original image] or [Processed img.]. Your selected image is displayed.
Page 422 Caution Results of processing with [Digital Lens Optimizer] set to [High] are only applied in magnified view. Results are not applied in normal display.
Page 423 Processing Images with Specified Aspect Ratios JPEG or HEIF images at the specified aspect ratio are created when you process RAW images shot with [ Cropping/aspect ratio] ( ) set to [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)].
Page 424 RAW Image Processing Options Brightness adjustment You can adjust the image brightness up to ±1 stop in 1/3-stop increments. White balance ( You can select the white balance. Selecting [ ] enables you to select [Auto: Ambience priority] or [Auto: White priority]. If you select [ ], you can set the color temperature.
Page 425 Image quality ( You can set the image quality when creating a JPEG or HEIF image. Color space ( You can select either sRGB or Adobe RGB. Since the camera screen is not compatible with Adobe RGB, the difference in the image will hardly be perceptible when either color space is set.
Page 426 • Diffraction correction ( The diffraction by the lens aperture degrading the image sharpness can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image ( Caution Processing RAW images in the camera will not produce exactly the same results as processing RAW images with Digital Photo Professional (EOS software).
Page 427: Dpraw Processing
DPRAW Processing Portrait Relighting Background Clarity When you use the camera in RAW image processing ( ) for images captured with Dual Pixel RAW enabled ( ), dual pixel data and detailed face information can be used in image correction. Portrait Relighting Oblique or insufficient lighting on human subjects can be corrected by applying a virtual light source.
Page 428 Select [Portrait relighting]. Turn the < > dial to select an image to adjust, then press < >.
Page 429 Adjust the image. Select [ ], then press < >. Adjust the image, then press < >. (1) Use < > to position the light source. (2) represents the position of the selected face. By adjusting (1) relative to (2), you can adjust the direction of lighting. Overlapping positions of (1) and (2) place the light source directly in front of the face.
Page 430 Comparison screen You can switch between the [After change] and [Shot settings] screens by pressing the [ ] button, then turning the < > dial. Items in orange on the [After change] screen have been modified since the time of capture. Caution Selection is possible from up to 10 people.
Page 431 Background Clarity To adjust hazy backgrounds in images of people and landscapes, you can set the level of clarity in a range of 0–4. For clarity adjustment in RAW image processing, you can set the level of image edge contrast in a range of -4 to +4. Select [ : DPRAW processing].
Page 432 Adjust the image. Select < >, then press < >. With < > selected, you can select the level by turning the < > or < > dial without pressing < >. Turn the < > or < > dial to select the level, then press < >.
Page 433 Save. Select [ ] (Save), read the message, and select [OK]. Note For settings other than [Portrait relighting] and [Background clarity], you can specify processing based on setting items of [ : RAW image processing] ( Caution Portrait relighting and background clarity HEIF images cannot be processed this way.
Page 434: Resizing Jpeg/Heif Images
Resizing JPEG/HEIF Images You can resize a JPEG or HEIF image to reduce the pixel count and save it as a new image. Resizing is available for , , or JPEGs or HEIFs (sizes except ), including those captured in RAW+JPEG and RAW+HEIF shooting. images and RAW images cannot be resized.
Page 435 Select the desired image size. Press < > to display the image sizes. Select the desired image size (1). Save. Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4.
Page 436: Cropping Jpeg/Heif Images
Cropping JPEG/HEIF Images You can crop a captured JPEG image and save it as another image. Cropping is available for JPEG or HEIF images. RAW images cannot be cropped. Images recorded in VIDEO mode cannot be cropped. Select [ : Cropping]. Select an image.
Page 437 Set the cropping frame. The image area within the cropping frame will be cropped. Resizing the cropping frame size Turn the < > dial to resize the cropping frame size. The smaller the cropping frame, the more magnified the cropped image will look. Correcting tilt You can correct image tilt by ±10°.
Page 438 Save. Turn the < > dial to select [ ], then press < >. Select [OK] to save the cropped image. Check the destination folder and image file number, then select [OK]. To crop another image, repeat steps 2 to 5. Caution The position and size of the cropping frame may change depending on the angle set for tilt correction.
Page 439: Converting Heif To Jpeg
Converting HEIF to JPEG You can convert HEIF images captured in HDR shooting and save them as JPEG images. Select [ : HEIF→JPEG conversion]. Select an image. Turn the < > dial to select an HEIF image to convert to JPEG. Press <...
Page 440 Save. Select [OK] to save the JPEG image. • Check the destination folder and image file number, then select [OK]. • To convert another image, repeat steps 2 and 3. Note Some scenes may look different after conversion (if original and converted images are compared).
Page 441: Slide Show
Slide Show You can play back the images on the card as an automatic slide show. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [ : Set image search conditions] ( Select [...
Page 442 Set the playback as desired. Select [Set up]. Set the [Display time] and [Repeat] (repeated playback) settings for the still photos. After completing the settings, press the < > button. Display time Repeat...
Page 443 Start the slide show. Select [Start]. After [Loading image...] is displayed, the slide show will start. Exit the slide show. To exit the slide show and return to the setting screen, press the < > button. Note To pause the slide show, press < >.
Page 444: Setting Image Search Conditions
Setting Image Search Conditions Clearing the Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slide show, erase, and apply other operations to filtered images. Select [ : Set image search conditions].
Page 445 Set the search conditions. Turn the < > dial to select an option. Turn the < > dial to set the option. A checkmark [ ] (1) is appended to the left of the option. (Specified as the search condition.) If you select the option and press the <...
Page 446 Apply the search conditions. Press < > and read the message displayed. Select [OK]. The search condition is applied. Display the found images. Press the < > button. Only the images that match the set conditions (filtered) will be played back.
Page 447 Note Search conditions may be cleared after operations involving camera power or card changes and editing, adding, or erasing images. Auto power off time may be extended while the [ : Set image search conditions] screen is displayed. Clearing the Search Conditions Access the screen in step 2, then press the <...
Page 448: Browsing Images With The Main Dial
Browsing Images with the Main Dial In single-image display, you can turn the < > dial to jump through the images forward or backward according to the jump method set. Select [ : Image jump w/ Select the jump method. Note With [Jump images by the specified number], you can turn the <...
Page 449 Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < > dial. You can browse by the jump method set.
Page 450: Switching The Main Dial And Quick Control Dial 2
Switching the Main Dial and Quick Control Dial 2 You can switch the functions assigned to these dials, as used on the image playback screen. Select [ : Switch Select an option. [Disable] Image jump Magnify/Index view [Enable] Magnify/Index view Image jump Note Corresponding icons in menus and on screens such as the Quick Control and...
Page 451: Rate/Voice Memo Button Function
Rate/Voice Memo Button Function You can assign image rating/protection/erasure or voice memo recording/playback to the < > button. Select [ button function].
Page 452 Select an option. / : Rating (Hold: (rec memo)) Assigns rating to the < > button. (Default setting.) You can press the < > button to select the rating to use. During playback, you can rate images or clear ratings by pressing the <...
Page 453: Customizing Playback Information Display
Customizing Playback Information Display Histogram You can specify screens and accompanying information displayed during image playback. Select [ : Playback information display]. Add a checkmark [ ] next to the number of screens to display. Select numbers with the < >...
Page 454 Histogram The histograms show signal levels across the tonal range. Brightness display (for checking the general exposure level and overall gradation) and RGB display (for checking saturation and gradation of red, green, and blue) are available. You can switch the histogram displayed by pressing the <...
Page 455 [Brightness] display This histogram is a graph showing the distribution of the image's brightness level, with the horizontal axis indicating the brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each brightness level. The more pixels there are toward the left, the darker the image, and the more pixels there are toward the right, the brighter the image.
Page 456 [RGB] display This histogram is a graph showing the distribution of each primary color's brightness level in the image (RGB or red, green, and blue), with the horizontal axis indicating the color's brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each color brightness level.
Page 457: Displaying The Highlight Alert
Displaying the Highlight Alert You can specify blinking display of overexposed highlights on the playback screen. To obtain more detailed gradation in the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again for a better result.
Page 458: Af Point Display
AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. If automatic AF point selection is set, multiple AF points may be displayed. Select [ : AF point disp.]. Select [Enable].
Page 459: Playback Grid
Playback Grid You can display a grid over still photos shown in single-image display on the playback screen. This function is convenient for checking the image's vertical or horizontal tilt as well as composition. Select [ : Playback grid]. Select an option.
Page 460: Hdmi Hdr Output
HDMI HDR Output You can view RAW or HEIF images in HDR by connecting the camera to an HDR TV. Select [ : HDMI HDR output]. Select [On]. Note Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual.
Page 461: Wireless Features
Caution Important Note that Canon cannot be held liable for any loss or damage caused by erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
Page 462: Tab Menus: Wireless Features
Tab Menus: Wireless Features Wireless features 1 Wi-Fi/Bluetooth connection Airplane mode Wi-Fi settings Bluetooth settings Nickname GPS device settings Image transfer Wireless features 2 Reset communication settings...
Page 463 Caution Wireless communication is not available while the camera is connected via an interface cable to a computer or other device. Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi. The camera cannot be connected via Wi-Fi if there is no card in it (except for [ ], or [ The Wi-Fi connection will be terminated if you set the camera's power to <...
Page 464: Wi-Fi/Bluetooth Connection
Wi-Fi/Bluetooth Connection Select [ : Wi-Fi/Bluetooth connection]. Select an option for the camera to connect to. Connect to smartphone ( Control the camera remotely and browse images on the camera over a Wi-Fi connection by using the dedicated Camera Connect app on smartphones or tablets (collectively referred to as “smartphones”...
Page 465 Images can be sent automatically to the image.canon cloud service for Canon customers after you complete member registration (free of charge). Original files of images sent to image.canon are retained for 30 days, without storage limitations, and can be downloaded to computers or transferred to other Web services.
Page 466: Connecting To A Smartphone
Connecting to a Smartphone Turning on Bluetooth and Wi-Fi on a Smartphone Installing Camera Connect on a Smartphone Connecting to a Bluetooth-Compatible Smartphone via Wi-Fi Camera Connect Functions Maintaining a Wi-Fi Connection When the Camera Is Off Canceling the Pairing Wi-Fi Connection without Using Bluetooth Automatic Image Transfer as You Shoot Sending Images to a Smartphone from the Camera...
Page 467 Turning on Bluetooth and Wi-Fi on a Smartphone Turn on Bluetooth and Wi-Fi from the smartphone settings screen. Note that pairing with the camera is not possible from the smartphone's Bluetooth settings screen. Note To establish a Wi-Fi connection via an access point, see Wi-Fi Connection via Access Points.
Page 468 Installing Camera Connect on a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed. Use the latest version of the smartphone OS. Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.
Page 469 Connecting to a Bluetooth-Compatible Smartphone via Wi-Fi Steps on the camera (1) Select [ : Wi-Fi settings]. Select [Enable]. Select [ : Bluetooth settings].
Page 470 Select [Enable]. Select [Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone].
Page 471 Select [Add a device to connect to]. Select an option. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect.
Page 472 Select [Pair via Bluetooth]. Press < > to start pairing. To pair with a different smartphone after pairing with one initially, select [OK] on the screen shown above.
Page 473 Steps on the smartphone (1) Start Camera Connect. Tap the camera for pairing. In Android, go to Steps on the camera (2). Tap [Pair] (iOS only).
Page 474 Steps on the camera (2) Select [OK]. Press the < > button. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen.
Page 475 Caution The camera cannot be connected to two or more devices at the same time via Bluetooth. To switch to a different smartphone for the Bluetooth connection, see Changing or Deleting Connection Settings. Bluetooth connection consumes battery power even after the camera's auto power off is activated.
Page 476 Steps on the smartphone (2) Tap a Camera Connect function. In iOS, tap [Join] when a message is displayed to confirm camera connection. For the Camera Connect functions, see Camera Connect Functions. When a Wi-Fi connection is established, the screen for the selected function will appear.
Page 477 [ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error.
Page 478 Camera Connect Functions Images on camera (only images recorded in PHOTO mode) Images can be browsed, deleted, or rated. Images can be saved on a smartphone. Remote live view shooting Enables remote shooting as you view a live image on the smartphone. Auto transfer Enables camera and app setting adjustment for automatic transfer of your shots ( Bluetooth remote controller...
Page 479 Maintaining a Wi-Fi Connection When the Camera Is Off Even when the camera power switch is set to < >, as long as it is paired to a smartphone via Bluetooth, you can use the smartphone to connect via Wi-Fi and browse images on the camera or perform other operations.
Page 480 Canceling the Pairing Cancel pairing with a smartphone as follows. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone]. If the history ( ) is displayed, switch screens with the < > < > dial or < >. Select [Edit/delete device].
Page 481 Select the smartphone to cancel pairing with. Smartphones currently paired with the camera are labeled [ ]. Select [Delete connection information]. Select [OK]. Clear the camera information on the smartphone. In the smartphone's Bluetooth setting menu, clear the camera information registered on the smartphone.
Page 482 Wi-Fi Connection without Using Bluetooth Steps on the camera (1) Set Wi-Fi settings to [Enable]. See steps 1–2 in Connecting to a Bluetooth-Compatible Smartphone Wi-Fi. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone]. If the history ( ) is displayed, switch screens with the < >...
Page 483 Select [Add a device to connect to]. Select an option. If Camera Connect is already installed, select [Do not display]. Select [Connect via Wi-Fi].
Page 484 Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. Note By selecting [Switch network] in step 7, you can establish a Wi-Fi connection via an access point (...
Page 485 Steps on the smartphone Operate the smartphone to establish a Wi-Fi connection. Smartphone's screen (sample) Activate the smartphone's Wi-Fi function, then tap the SSID (network name) checked in step 7 in Steps on the camera (1). For the password, enter the password checked in step 7 in Steps on the camera (1).
Page 486 Steps on the camera (2) Select [OK]. To specify viewable images, press the < > button. Configure as described in Settings to Make Images Viewable from Smartphones, starting in step 5. The main window of Camera Connect will be displayed on the smartphone.
Page 487 Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. Select [ : Wi-Fi settings]. Select [Send to smartphone after shot]. Set [Auto send] to [Enable].
Page 488 Set [Size to send]. Take the picture.
Page 489 Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. Switch to playback. Press the < > button. Select [ Send images to smartphone]. If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection.
Page 490 (1) Sending images individually Select an image to send. Use the < > dial to select an image to send, then press < >. You can turn the < > dial counterclockwise to select the image using the index display. Select [Send img shown].
Page 491 (2) Sending multiple selected images Press < >. Select [Send selected].
Page 492 Select images to send. Use the < > dial to select images to send, then press < >. You can turn the < > dial counterclockwise to switch to select the images from 3-image display. To return to single-image display, turn the <...
Page 493 Select [Size to send]. On the displayed screen, select an image size. Select [Send].
Page 494 (3) Sending a specified range of images Press < >. Select [Send range]. Specify the range of images. Select the first image (start point). Select the last image (end point). To cancel the selection, repeat this step. To change the number of images in index display, turn the < >...
Page 495 Confirm the range. Press the < > button. Select [Size to send]. On the displayed screen, select an image size. Select [Send].
Page 496 (4) Sending all images on the card Press < >. Select [Send all card].
Page 497 Select [Size to send]. On the displayed screen, select an image size. Select [Send].
Page 498 (5) Sending images that match the search conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For details on [Set image search conditions], see Setting Image Search Conditions. Press < >. Select [Send all found].
Page 499 Select [Size to send]. On the displayed screen, select an image size. Select [Send].
Page 500 Ending image transfer Sending images from the camera when paired via Bluetooth (Android devices only) Press the < > button on the image transfer screen. Select [OK] to end image transfer and the Wi-Fi connection. Sending images from the camera over a Wi-Fi connection Press the <...
Page 501 Note You can cancel the image transfer by selecting [Cancel] during the transfer. You can select up to 999 files at a time. With a Wi-Fi connection established, disabling the smartphone's power saving function is recommended. Selecting the reduced size for still photos applies to all still photos sent at that time. Note that size still photos are not reduced.
Page 502 Terminating Wi-Fi Connections Perform either of the following operations. On the Camera Connect screen, tap [ ]. On the [ Wi-Fi on] screen, select [Disconnect,exit]. If the [ Wi-Fi on] screen is not displayed, select [ : Wi-Fi/Bluetooth connection]. Select [Disconnect,exit], then select [OK] on the confirmation screen.
Page 503 Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone]. If the history ( ) is displayed, switch screens with the < > < >...
Page 504 Select a smartphone. Select the name of the smartphone on which you want to make the images viewable. Select [Viewable imgs].
Page 505 Select an option. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified. When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable.
Page 506 [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images.
Page 507 Caution With a Wi-Fi connection to a smartphone established, certain functions are unavailable. In remote shooting, the AF speed may become slower. Depending on the communication status, image display or shutter release timing may be delayed. When saving images to a smartphone, you cannot take a picture even if you press the camera's shutter button.
Page 508: Connecting To A Computer Via Wi-Fi
Connecting to a Computer via Wi-Fi Operating the Camera Using EOS Utility Direct Transfer Creating and Registering Captions This section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS Utility (EOS software). Install the latest version of EOS Utility on the computer before setting up a Wi-Fi connection.
Page 509 Select [ Remote control (EOS Utility)]. If the history ( ) is displayed, switch screens with the < > < > dial or < >. Select [Add a device to connect to]. Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen.
Page 510 Steps on the computer (1) Select the SSID, then enter the password. Computer's screen (sample) On the computer's network setting screen, select the SSID checked in step 5 in Steps on the camera (1). For the password, enter the password checked in step 5 in Steps on the camera (1).
Page 511 Steps on the camera (2) Select [OK]. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected. Steps on the computer (2) Start EOS Utility. In EOS Utility, click [Pairing over Wi-Fi/LAN]. If a firewall-related message is displayed, select [Yes].
Page 512 Click [Connect]. Select the camera to connect to, then click [Connect]. Steps on the camera (3) Establish a Wi-Fi connection. Select [OK].
Page 513 [ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error. The Wi-Fi connection to a computer is now complete. Operate the camera using EOS Utility on the computer.
Page 514 Direct Transfer With the camera connected to EOS Utility and the main EOS Utility window displayed, you can use the camera to transfer images to computer. Selecting images to transfer Select [ : Image transfer]. Select [Image sel./transfer]. Select [Direct transfer].
Page 515 Select [Sel.Image]. Select images to transfer. Use the < > dial to select an image to transfer, then press < >. Use the < > dial to add a checkmark [ ] in the upper left of the screen, then press < >.
Page 516 Select [OK]. The selected images are transferred to the computer.
Page 517 Selecting multiple images Multiple images can be transferred at once after you choose a selection method. Access the [Image sel./transfer] screen. Follow steps 1–3 in Selecting Images to Transfer. Select a selection method.
Page 518 In a folder Select [Sel. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images in the selected folder for which transfer failed. • Selecting [Select images not transferred] selects all unsent images in the selected folder.
Page 519 Select [OK] to transfer the selected images to the computer.
Page 520 In a card Select [All images]. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images on the card for which transfer failed. • Selecting [Select images not transferred] selects all unsent images on the card. •...
Page 521 Select range Select [Range]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be sent. After image selection, press the < >...
Page 522 Transferring RAW+JPEG or RAW+HEIF images For RAW+JPEG or RAW+HEIF images, you can specify which image to transfer. Select [ : Image transfer]. Select the type of images to transfer.
Page 523 RAW+JPEG transfer • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG]. RAW+HEIF transfer • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF]. Caution Some menu items are not available during image transfer. Note This setting is linked to [RAW+JPEG transfer] and [RAW+HEIF transfer] settings on the [Transfer type/size] screen (...
Page 524 Creating and Registering Captions You can create captions and register them on the camera to use them as described in Adding a Caption Before Transfer. Start EOS Utility and select [Camera settings]. Select [WFT Captions]. Enter the caption or captions. Enter up to 31 characters (in ASCII format).
Page 525 Set the captions on the camera. Select [Apply to camera] to set your new captions on the camera.
Page 526: Sending Images To A Web Service
This section describes how to send images to image.canon. Registering image.canon and Setting Up Auto Send You can register image.canon on the camera and prepare to send your shots automatically. A computer or smartphone with a browser and internet connection is required.
Page 527 Select [ Upload to Web service]. Select [I Agree]. Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Go to step 6 in Wi-Fi Connection via Access Points.
Page 528 Enter your email address. Enter your email address, then select [OK]. Enter a four-digit number. Enter a four-digit number of your choice, then select [OK].
Page 529 Select [OK]. The [ ] icon changes to [ Steps on the computer or smartphone Set up camera web link. Access the page in the notification message. Follow the instructions to complete the settings on the camera web link settings page.
Page 530 Steps on the camera (2) Select [OK]. The [ ] icon changes to [ Select [Upload to Web service].
Page 531 Select [Auto send]. Once [Enable] is set, images are automatically sent when you turn the camera on. Restart the camera. The images are now sent automatically. To switch networks, select [Switch network] and follow steps 5–8. To remove the connection, select [Clear camera web link settings] and then [OK]. Note All image files on cards are sent when [Auto send] is set to [Enable].
Page 532: Image Transfer To Ftp Servers
Image Transfer to FTP Servers Preparation Connecting to the Access Point Configuring FTP Server Connection Settings FTP Transfer Settings Transferring Multiple Images at Once Adding a Caption Before Transfer Auto Retry If Transfer Fails Viewing Transferred Images Your images can be transferred to an FTP server on the network the camera is connected Preparation A computer running one of the following OSes is required.
Page 533 Connecting to the Access Point Set Wi-Fi settings to [Enable]. See steps 1–2 in Connecting to a Bluetooth-Compatible Smartphone Wi-Fi. Select [ : Wi-Fi/Bluetooth connection]. Select [ Transfer images to FTP server]. Select [Add a device to connect to].
Page 534 Select [Setting method]. Select an option and then [OK] to go to the next screen. Select [Configure online] to configure connection settings and then join the network. Select [Configure offline] to configure FTP server connection settings without connecting. Select [Connect with WPS]. Follow these steps to connect via WPS (PBC mode).
Page 535 Press the WPS button on the access point. For details on where the WPS button is and how long to press it, refer to the access point user manual. Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point.
Page 536 Configuring FTP Server Connection Settings Select an FTP mode. For secure FTP transfer using a root certificate, select [FTPS]. For details on root certificate settings, see Set Root Certif. Select [OK] to go to the next screen. Select [Address setting]. Select [OK] to go to the next screen.
Page 537 Enter the FTP server IP address. Use the virtual keyboard ( ) to enter the IP address. If DNS is used, enter the domain name. To set the entered values and return to the screen for step 2, press the <...
Page 538 Configure proxy server settings. Not displayed if you selected [FTPS] in step 1. Select [OK] to go to the next screen. Configure the login method. Select [OK] to go to the next screen.
Page 539 Specify a target folder. Select [Root folder] to have images saved in the root folder, as specified in FTP server settings. Select [Select folder] to specify a target folder in the root folder. If the folder does not exist, it is created automatically. Select [OK] to go to the next screen.
Page 540 FTP Transfer Settings You can configure settings related to FTP transfer and power saving. Select [ : Wi-Fi settings]. Select [FTP transfer settings].
Page 541 Select an option to configure. Automatic transfer Select [Enable] for automatic image transfer to the FTP server immediately after shooting. You can continue shooting still photos as usual while images are being transferred. Caution Before shooting, make sure a card is in the camera. If you shoot without recording images, they cannot be transferred.
Page 542 Transfer type/size In [JPEG size to trans.], you can specify the size of images to transfer. For example, to transfer smaller JPEGs when the camera is set to record larger JPEGs to one card and smaller JPEGs to the other, set to [SmallerJPEG].
Page 543 Set root certif If you specified [FTPS] FTP mode when configuring connection settings, the root certificate used by the FTPS server must be imported to the camera. Caution Only the root certificate with a file name of “ROOT.CER,” “ROOT.CRT,” or “ROOT.PEM” can be imported to the camera.
Page 544 Transferring Multiple Images at Once Selecting images to transfer Selecting multiple images Transferring RAW+JPEG or RAW+HEIF images After shooting, you can select multiple images and transfer them all at once, or you can transfer unsent images or images that could not be sent previously. You can continue shooting still photos as usual during transfer.
Page 545 Select [FTP transfer]. Select [Sel.Image]. Select the image to transfer. Use the < > dial to select an image to transfer, then press < >. Use the < > dial to add a checkmark [ ] in the upper left of the screen, then press <...
Page 546 Select [Transfer]. Select [OK]. The selected images are transferred to the FTP server.
Page 547 Selecting multiple images Multiple images can be transferred at once after you choose a selection method. You can continue shooting still photos as usual while images are being transferred. Access the [Image sel./transfer] screen. Follow steps 1–3 in Selecting Images to Transfer.
Page 548 In a folder Select [Sel. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images in the selected folder for which transfer failed. • Selecting [Select images not transferred] selects all unsent images in the selected folder.
Page 549 Select [OK] to transfer the selected images to the FTP server.
Page 550 In a card Select [All images]. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images on the card for which transfer failed. • Selecting [Select images not transferred] selects all unsent images on the card. •...
Page 551 Select range Select [Range]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be sent. After image selection, press the < >...
Page 552 Transferring RAW+JPEG or RAW+HEIF images For RAW+JPEG or RAW+HEIF images, you can specify which image to transfer. Select [ : Image transfer]. Select the type of images to transfer.
Page 553 RAW+JPEG transfer • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG]. RAW+HEIF transfer • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF]. Caution Some menu items are not available during image transfer. Note This setting is linked to [RAW+JPEG transfer] and [RAW+HEIF transfer] settings on the [Transfer type/size] screen (...
Page 554 Adding a Caption Before Transfer You can add a registered caption to each image before transfer. This is convenient if you want to inform the recipient of the printing quantity, for example. Captions are also added to images saved to the camera. You can check captions added to images by examining the Exif information, in the user comments.
Page 555 Specify the caption. Select [Caption], and on the screen displayed, select the content of the caption. Select [Transfer]. The image is transferred with the caption. After transfer, display returns to the [Image transfer] screen. Caution Other images cannot be selected from the [Transfer with caption] screen. To select another image for transfer with a caption, view that image before following these steps.
Page 556 Auto Retry If Transfer Fails If transfer fails, the camera's access lamp blinks in red. In this case, the following screen is displayed after you press the < > button and select [ : Wi-Fi/Bluetooth connection]. To resolve the error displayed, see the troubleshooting information ( Once you have resolved the issue, the images that could not be sent initially will be transferred automatically.
Page 557 Viewing Transferred Images Images transferred to the FTP server are stored in the following folder as specified in the FTP server settings. Target folder of the FTP server Under the default settings of the FTP server, images are stored in [C drive] → [Inetpub] folder →...
Page 558: Wi-Fi Connection Via Access Points
Wi-Fi Connection via Access Points Camera Access Point Mode Manual IP Address Setup This section describes how to join a Wi-Fi network via an access point compatible with WPS (PBC mode). First, check the position of the WPS button and how long to press it. It may take approx. 1 min.
Page 559 Select [Add a device to connect to]. The following message is displayed if you have selected [ Connect to smartphone]. If Camera Connect is already installed, select [Do not display]. On the [Connect to smartphone] screen displayed next, select [Connect via Wi-Fi]. Select [Switch network].
Page 560 Select [Connect with WPS]. Note For [Camera access point mode] displayed in step 6, see Camera Access Point Mode. Select [WPS (PBC mode)]. Select [OK].
Page 561 Connect to the access point via Wi-Fi. Press the access point's WPS button. Select [OK]. Select [Auto setting]. Select [OK] to access the setting screen for the Wi-Fi function. If an error occurs with [Auto setting], see Manual IP Address Setup.
Page 562 Go to step 7 or 8 in Operating the Camera Using EOS Utility. Transfer images to FTP server] Go to step 10 in Connection via Access Points. Upload to Web service] Go to step 5 in Registering image.canon and Setting Up Auto Send.
Page 563 Camera Access Point Mode Camera access point mode is a connection mode for connecting the camera directly to each device via Wi-Fi. Displayed when [ ], [ ], or [ ] is selected after [ : Wi-Fi/Bluetooth connection]. Easy connection Use the other device to establish a Wi-Fi connection with the SSID shown on the camera screen.
Page 564 Manual IP Address Setup The options displayed vary depending on the Wi-Fi function. Select [Manual setting]. Select [OK]. Select an option. Select an option to access the screen for numerical input. To use a gateway, select [Enable], then select [Address].
Page 565 Enter the number. Turn the < > dial to move the input position in the upper area, and use the < > < > dials or < > to select numbers to enter. Press < > to enter the selected number. To set the entered numbers and return to the screen for step 2, press the <...
Page 566: Connecting To A Wireless Remote Control
Connecting to a Wireless Remote Control Canceling the Pairing This camera can also be connected to Wireless Remote Control BR-E1 (sold separately, via Bluetooth for remote control shooting. Set Wi-Fi settings to [Enable]. See steps 1–4 in Connecting to a Bluetooth-Compatible Smartphone Wi-Fi.
Page 567 Select [Add a device to connect to]. Press < >. Pair the devices. When the [Pairing] screen appears, press and hold the <W> and <T> buttons on the BR-E1 simultaneously for at least 3 sec. After a message confirms that the camera is paired with the BR-E1, press <...
Page 568 Set up the camera for remote shooting. When shooting still photos, select [ ] or [ ] as the drive mode ( For instructions after the pairing is complete, refer to the BR-E1's Instruction Manual. Caution Bluetooth connections consume battery power even after the camera's auto power off is activated.
Page 569 Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to Wireless Remote]. Select [Delete connection information].
Page 570 Select [OK].
Page 571: Reconnecting Via Wi-Fi
Reconnecting via Wi-Fi Follow these steps to reconnect via Wi-Fi using registered connection settings. Select [ : Wi-Fi/Bluetooth connection]. Select an option. Select an option to connect to via Wi-Fi from the displayed history. If the option is not displayed, use the < >...
Page 572 Operate the connected device. [ ] Smartphone Start Camera Connect. If the smartphone's connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a smartphone via Wi-Fi, “_Canon0A”...
Page 573: Registering Multiple Connection Settings
Registering Multiple Connection Settings You can register up to 10 connection settings for the wireless communication functions. Select [ : Wi-Fi/Bluetooth connection]. Select an option. If the history ( ) is displayed, switch screens with the < > < > dial or <...
Page 574 Note To delete connection settings, see Changing or Deleting Connection Settings.
Page 575: Airplane Mode
Airplane Mode You can temporarily disable Wi-Fi and Bluetooth functions. Select [ : Airplane mode]. Set to [On]. ] is displayed on the screen. Note ] may not be displayed in still photo shooting or playback, depending on display settings. If it is not displayed, press the < >...
Page 576: Wi-Fi Settings
Wi-Fi Settings Select [ : Wi-Fi settings]. Select an option. Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. Connection history You can set the connection history for devices connected via Wi-Fi to [Show] or [Do not display].
Page 577: Bluetooth Settings
Bluetooth Settings Select [ : Bluetooth settings]. Select an option. Bluetooth If you will not use the Bluetooth function, select [Disable]. Check connection information You can check the name and communication status of the paired device. Bluetooth address You can check the camera's Bluetooth address.
Page 578: Nickname
Nickname You can change the camera nickname (displayed on smartphones and other cameras) as needed. Select [ : Nickname]. Enter text using the Virtual Keyboard Operations. When you finish entering characters, press the < > button.
Page 579: Gps Device Settings
GPS Device Settings GP-E2 Smartphone GPS Connection Display You can geotag images with GPS Receiver GP-E2 (sold separately) or a Bluetooth- compatible smartphone. GP-E2 Attach GP-E2 to the camera. Attach GP-E2 to the camera's multi-function shoe and turn it on. For details, refer to the GP-E2 Instruction Manual.
Page 580 Update the GP-E2 firmware to Ver. 2.0.0 or later. Firmware updating requires an interface cable. For updating instructions, visit the Canon website. GP-E2 cannot be connected to the camera with a cable. The camera does not record the shooting direction.
Page 581 Smartphone Complete these settings after installing the dedicated Camera Connect app ( ) on the smartphone. On the smartphone, activate location services. Establish a Bluetooth connection. Start Camera Connect and pair the camera and smartphone via Bluetooth. Select [ : GPS device settings]. In [Select GPS device], select [Smartphone].
Page 582 GPS Connection Display You can check the status of smartphone location information acquisition in the GPS connection icon on the screen for still photo shooting ( Gray: Location services are off Blinking: Location information cannot be acquired On: Location information acquired For details on how GPS connection status is indicated when GP-E2 is used, refer to the GP-E2 Instruction Manual.
Page 583 Caution The smartphone can acquire location information only while it is paired with the camera via Bluetooth. Direction information is not acquired. Acquired location information may not be accurate, depending on traveling conditions or smartphone status. It may take some time to acquire location information from the smartphone after you turn the camera on.
Page 584: Changing Or Deleting Connection Settings
Changing or Deleting Connection Settings To change or delete the connection settings, terminate the Wi-Fi connection first. Select [ : Wi-Fi/Bluetooth connection]. Select an option. If the history ( ) is displayed, switch screens with the < > < > dial or <...
Page 585 Select [Edit/delete device]. You can change the Bluetooth connection by selecting a smartphone labeled with [ ] in gray. After the [Connect to smartphone] screen is displayed, select [Pair via Bluetooth], then press < > on the next screen. Select the device for which to change or delete the connection settings.
Page 586 Viewable imgs ( Displayed when [ Connect to smartphone] is selected. Settings will appear at the bottom of the screen. Delete connection information When deleting connection information for a paired smartphone, also delete the camera information registered on the smartphone (...
Page 587: Resetting Communication Settings
Resetting Communication Settings All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. Select [ : Reset communication settings]. Select [OK].
Page 588: View Info Screen
View Info Screen You can check error details and the camera's MAC address. Select [ : Wi-Fi/Bluetooth connection]. Press the < > button. The [View info] screen will appear. When an error has occurred, press < > to display the error content.
Page 589: Virtual Keyboard Operations
Virtual Keyboard Operations Input area, for entering text Cursor keys, for moving in the input area Current no. of characters/no. available Keyboard Switch input modes Space Delete a character in the input area Exit input Use the < > dial to move within (1). Use <...
Page 590: Responding To Error Messages
Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press < >.
Page 591 11: Connection target not found In the case of [ ], is Camera Connect running? • Establish a connection using Camera Connect ( In the case of [ ], is EOS Utility running? • Start EOS Utility and try to connect again ( Are the camera and the access point set to use the same encryption key for authentication? •...
Page 592 21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the correct setting? • If no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera ( What to check on the DHCP server Is the power of the DHCP server on?
Page 593 22: No response from DNS server What to check on the camera On the camera, the DNS address is set to [Manual setting]. Is this the correct setting? • If no DNS server is used, set the camera's DNS address setting to [Disable] ( On the camera, does the DNS server's IP address setting match the server's actual address? •...
Page 594 23: Device with same IP address exists on selected network Is another device on the camera network using the same IP address as the camera? • Change the camera's IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address.
Page 595 41: Cannot connect to FTP server What to check on the camera The camera's proxy server setting is [Enable]. Is this the correct setting? • If no proxy server is used, set the camera's proxy server setting to [Disable] ( Do the camera's [Address setting] and [Port No.] settings match those of the proxy server? •...
Page 596 On the camera, does the FTP server's IP address setting (in [Address]) match the server's actual address? • Configure the IP address on the camera to match the actual FTP server address Is a firewall or other security software enabled? •...
Page 597 43: Cannot connect to FTP server. Error code received from server. What to check on the proxy server Is the proxy server on? • Turn on the proxy server. Is the proxy server working correctly? • Check the proxy server settings to make sure the server is working correctly as a proxy server.
Page 598 45: Cannot login to FTP server. Error code received from server. What to check on the camera On the camera, is the [Login name] set correctly? • Check the login name for accessing the FTP server. Check upper- and lower-case letters, and make sure the correct login name is set on the camera ( On the camera, is the [Login password] set correctly? •...
Page 599 46: For the data session, error code received from FTP server What to check on the FTP server The connection was terminated by the FTP server. • Restart the FTP server. Do the user rights for the FTP server allow reading, writing, and log access? •...
Page 600 61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? • Move the antenna of the access point to a position clearly visible from the point of view of the camera.
Page 601 64: Cannot connect to wireless LAN terminal Are the camera and the access point set to use the same encryption method? • The camera supports the following encryption methods: WEP, TKIP, and AES ( If filtering by MAC address is active, is the MAC address of the camera in use registered at the access point? •...
Page 602 125: Check the network settings Is the network connected? • Check the connection status of the network. 126: Could not connect to server image.canon is under maintenance or temporarily busy. • Try accessing the service again later.
Page 603 127: An error has occurred A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. • Try again to establish the Wi-Fi connection to image.canon. 151: Transmission canceled Automatic image transfer was somehow interrupted.
Page 604: Wireless Communication Function Precautions
Wireless Communication Function Precautions If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions. Distance between the camera and the smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible.
Page 605: Security
Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor wireless LAN transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Page 606: Checking Network Settings
Checking Network Settings Windows Open the Windows [Command Prompt], then enter ipconfig/all and press the <Enter> key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. macOS In macOS, open the [Terminal] application, enter ifconfig -a, and press the <Return> key. The IP address assigned to the computer is indicated in the [enX] item (X: number) next to [inet], in the format “***.***.***.***”.
Page 607: Wireless Communication Status
Wireless Communication Status Wireless communication status can be checked on the screen. Quick Control screen Information display screen during playback (1) Wi-Fi function (2) Bluetooth function (3) Wireless signal strength Screen Communication Status Wi-Fi Function Wireless Signal Strength Wi-Fi: Disable Not connected Wi-Fi: Enable Connecting...
Page 608 Bluetooth Function Indicator Bluetooth Function Connection Status Screen Bluetooth connected Other than [Disable] Bluetooth not connected [Disable] Bluetooth not connected Not displayed...
Page 609: Set-Up
Set-up This chapter describes menu settings on the set-up ([ ]) tab. to the right of titles indicates functions only available in [ ], [ ], [ ], [ ], [ ], or ] mode. • Tab Menus: Set-up • Selecting Cards for Recording/Playback •...
Page 610: Tab Menus: Set-Up
Tab Menus: Set-up Set-up 1 (1) Record func+card/folder sel. • Selecting Cards for Recording/Playback • Creating a Folder File numbering File name Format card Auto rotate Date/Time/Zone Set-up 2 Language Video system Help text size Beep Headphone volume Power saving Eco mode...
Page 611 Set-up 3 Screen/viewfinder display Screen brightness Viewfinder brightness Screen/viewfinder color tone Fine-tune VF color tone UI magnification Set-up 4 HDMI resolution Touch control Multi function lock Shutter at shutdown Sensor cleaning...
Page 612 Set-up 5 Reset camera Custom shooting mode (C1-C3) Save/load cam settings on card Set-up 6 Battery info. Copyright information Certification Logo Display Firmware In [ ] mode, the following screen is displayed for [ 5]. Battery info.
Page 613: Selecting Cards For Recording/Playback
Selecting Cards for Recording/Playback Recording Method with Two Cards Inserted Recording/Playback Selection with Two Cards Inserted Recording is possible when card [ ] or [ ] is in the camera (except under some conditions). With only one card inserted, there is no need to follow these steps. With two cards inserted, you can select the recording method and card to use for recording and playback as follows.
Page 614 Set the recording method. Rec options Set the recording method for still photos. • Standard Records still photos to the card selected in [ Record/play]. • Auto switch card Same as [Standard], but additionally, the camera switches to the other card when one card becomes full. At this time, a new folder is created.
Page 615 Note Rec. separately/Rec. to multiple Images are recorded with the same file number to card The number of shots available as shown in the viewfinder and on the Quick Control screen is for the card with less free space. [Card* full] is displayed when one of the cards becomes full, and shooting is no longer possible.
Page 616 Recording/Playback Selection with Two Cards Inserted With [ Rec options] set to [Standard] or [Auto switch card], select the card for recording and playback. With [ Rec options] set to [Rec. separately] or [Rec. to multiple], select the card for playback.
Page 617 Note With [Priority: ] set, the camera switches to the priority card when cards are inserted or removed.
Page 618: Folder Settings
Folder Settings Creating a Folder Renaming Folders Selecting a Folder You can freely create and select the folder where the captured images are to be saved. You can also rename folders. Creating a Folder Select [ : Record func+card/folder sel.]. Select [Folder].
Page 619 Select [Create folder]. Select [OK]. To rename the folder, select [Change folder name].
Page 620 Renaming Folders Enter letters and numbers of your choice. You can enter five characters. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the < > button. Use the < >...
Page 621 Selecting a Folder (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Select a folder on the folder selection screen. Captured images are stored in your selected folder. Note Folders Folders are named as in “100CANON,” with a three-digit folder number followed by five letters or numbers.
Page 622: File Numbering
File Numbering Continuous Auto Reset Manual Reset The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) (1) File number Select [ : File numbering].
Page 623 Set the item. Select [Numbering]. Select [Continuous] or [Auto reset]. If you want to reset the file numbering, select [Manual reset] ( Select [OK] to create a new folder, and the file number will start with 0001. Caution If the file number in folder 999 reaches 9999, shooting will not be possible even if the card still has free space.
Page 624 Continuous For continuous file numbering regardless of switching cards or creating folders File numbering is continuous up to 9999, even if you replace a card, create a folder, or switch the target card (as in → ). This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
Page 625 Auto Reset For restarting file numbering from 0001 after switching cards or creating folders File numbering is reset to 0001 if you replace a card, create a folder, or switch the target card (as in → ). This is useful if you want to organize images by cards or folders. Note that file numbering may continue from any existing images in cards or folders that you switch to.
Page 626 Manual Reset For resetting file numbering to 0001 or starting from 0001 in new folders When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is useful, for example, if you want to use different folders for the images taken yesterday and the ones taken today.
Page 627: File Naming
File Naming File names consist of four alphanumeric characters followed by a four-digit file number ( and file extension. You can change the first four alphanumeric characters, which by default are unique for each camera and set when the camera is shipped. User setting 1 enables you to register four characters of your choice.
Page 628 Enter letters and numbers of your choice. Enter four characters for User setting 1 or three for User setting 2. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the < >...
Page 629 Select a registered file name. Select [File name], then choose a registered file name. Caution An underscore (“_”) cannot be used as the first character. Note User setting 2 Shooting after you have selected “*** + image size” (as registered to User setting 2) will add a character representing the current image size to your file name as the fourth character.
Page 630: Formatting
Formatting If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. Caution When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
Page 631 Format the card. Select [OK].
Page 632 Conditions requiring card formatting The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed ( Card file formats CFexpress cards are exFAT formatted. SD/SDHC cards will be formatted in FAT32.
Page 633: Auto Rotate
Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. Select [ : Auto rotate].
Page 634 Select an option. Automatically rotates images for display on both the camera and computers. Automatically rotates images only for display on computers. Images are not automatically rotated. Caution Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On].
Page 635: Date/Time/Zone
Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow these steps to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it.
Page 636 Turn the < > dial to select the time zone, then press < >. Set the date and time. Turn the < > dial to select an option, then press < >. Set by turning the < > dial, then press < >.
Page 637 Caution The date, time, and time zone settings may be reset when the camera is stored without the battery, when the battery is exhausted, or when it is exposed to freezing temperatures for an extended period. If this happens, set them once again. After changing [Time zone], check that the correct date/time are set.
Page 638: Language
Language Select [ : Language Set the desired language.
Page 639: Video System
Video System When playing back captured still photos, set the video system according to the television connected to the camera with an HDMI cable. Select [ : Video system]. Select an option. For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.).
Page 640: Help
Help Changing the Help Text Size When [ Help] is displayed, you can display a description of the feature by pressing the < > button. Press it again to exit Help display. To scroll the screen when a scrollbar (1) appears on the right, turn the <...
Page 641 Example: [ : Multi function lock] < >...
Page 642 Changing the Help Text Size Select [ : Help text size]. Select an option.
Page 643: Beeps
Beeps Select [ : Beep]. Select an option. Enable The camera beeps after focusing and in response to touch operations. Touch Disables beeping for touch operations. Disable Disables beeping for focus confirmation, self-timer shooting, and touch operations.
Page 644: Headphone Volume
Headphone Volume You can use headphones when playing back voice memos. Select [ : Headphone volume]. Adjust the volume. Turn the < > dial to adjust the volume, then press < >.
Page 645: Power Saving
Power Saving You can adjust the timing of when the screen, camera, and viewfinder turn off automatically after the camera is left idle (Display off, Auto power off, and Viewfinder off). Select [ : Power saving]. Select an option. Note Even when [Auto power off] is set to [Disable], the screen will turn off after the time set in [Display off].
Page 646: Eco Mode
Eco Mode Enables you to conserve battery power in shooting mode. When the camera is not in use, the screen darkens to reduce battery consumption. Select [ : Eco mode]. Select [On]. The screen darkens when the camera is not used for approx. two seconds.
Page 647: Screen/Viewfinder Display
Screen/Viewfinder Display You can specify to use the screen or viewfinder for display, to avoid accidentally activating the eye sensor when the screen is open. Select [ : Screen/viewfinder display]. Select an option. AUTO1: Auto 1 ( : only screen) Always use the screen for display when it is swung out.
Page 648 Note You can also switch between viewfinder and screen display by pressing a button you have customized by assigning to switching. With this setting set to [AUTO1] or [AUTO2], the camera responds to the eye sensor accordingly. With [AUTO1] set, the camera responds to the eye sensor when the screen is closed and facing you but does not respond when it is swung out.
Page 649: Screen Brightness
Screen Brightness Select [ : Screen brightness]. Make the adjustment. Referring to the gray image, turn the < > dial to adjust brightness, then press < >. Check the effect on the screen. Note To check the image's exposure, referring to the histogram is recommended (...
Page 650: Viewfinder Brightness
Viewfinder Brightness Select [ : Viewfinder brightness]. Turn the < > dial and select either [Auto] or [Manual]. Auto Press < >. Check the effect in the viewfinder. Manual Turn the < > dial to adjust viewfinder brightness, then press < >.
Page 651: Screen And Viewfinder Color Tone
Screen and Viewfinder Color Tone Select [ : Screen/viewfinder color tone]. Make the adjustment. Turn the < > dial to select an option, then press < >.
Page 652: Fine-Tuning Viewfinder Color Tone
Fine-Tuning Viewfinder Color Tone Select [ : Fine-tune VF color tone]. Make the adjustment. Referring to the gray image, use < > for adjustment, then press < >. Check the effect in the viewfinder.
Page 653: Ui Magnification
UI Magnification You can magnify menu screens by double-tapping with two fingers. Double-tap again to restore the original display size. Select [ : UI magnification]. Select [Enable]. Caution Use camera controls when configuring menu functions with the display magnified. Touch-screen operations are not supported.
Page 654: Hdmi Resolution
HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. Select [ : HDMI resolution]. Select an option. Auto The images will automatically be displayed at the optimum resolution matching the connected television.
Page 655: Touch Control
Touch Control Select [ : Touch control]. Select an option. [Sensitive] makes the touch-screen panel more responsive than [Standard]. To disable touch operations, select [Disable]. Caution Precautions for touch-screen panel operations Do not use sharp objects such as fingernails or ballpoint pens for touch operations. Do not use wet fingers for touch operations.
Page 656: Multi-Function Lock
Multi-Function Lock Specify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changing settings. Select [ : Multi function lock]. Select camera controls to lock. Press < > to add a checkmark [ ]. Select [OK].
Page 657: Shutter At Shutdown
Shutter at Shutdown You can set whether to leave the shutter open or close it when the camera's power switch is set from < > to < >. Select [ : Shutter at shutdown]. Select an option. : Closed Closes the shutter. Normally set to closed, to prevent dust from adhering to the sensor when you switch lenses.
Page 658: Sensor Cleaning
Sensor Cleaning Cleaning Now Cleaning Automatically Cleaning Manually The camera's sensor cleaning feature cleans the front of the image sensor. Note For best results, clean with the camera in a stable position on a desk or other flat surface. Cleaning Now Select [ : Sensor cleaning].
Page 659 Select [Clean now Select [OK] on the confirmation screen. Note Even if you repeat the sensor cleaning, the result will not improve much. Note that [Clean now ] may not be available immediately after cleaning.
Page 660 Cleaning Automatically Select [Auto cleaning Select an option. Turn the < > dial to select an option, then press < >.
Page 661 Always use a fully charged battery. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Select [Clean manually]. Select [OK].
Page 662 If the battery level becomes low while cleaning the sensor, the beeper will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.
Page 663: Resetting The Camera
Resetting the Camera The camera's settings for shooting functions and menu functions can be restored to their defaults (PHOTO mode settings only). Select [ : Reset camera]. Select an option. Basic settings Restores default settings for camera shooting functions and menu settings.
Page 664: Custom Shooting Mode (C1-C3)
Custom Shooting Mode (C1–C3) Automatic Update of Registered Settings Canceling Registered Custom Shooting Modes Current camera settings such as shooting, menu, and Custom Function settings can be registered in Custom shooting modes [ ] to [ Select [ : Custom shooting mode (C1-C3)]. Select [Register settings].
Page 665 Register the desired items. Select the Custom shooting mode to register, then select [OK] on the [Register settings] screen. The current camera settings are registered to Custom shooting mode Automatic Update of Registered Settings If you change a setting while shooting in Custom shooting mode, the mode can be automatically updated with the new setting (Auto update).
Page 666 Canceling Registered Custom Shooting Modes If you select [Clear settings] in step 2, the settings of each mode can be restored to default settings, as they were before registration. Note You can also change shooting and menu settings in Custom shooting modes.
Page 667: Save/Load Settings On Card
This enables you to save and apply optimal settings for specific shooting situations, or load settings files on other EOS R5 C cameras to use the cameras with the same settings (PHOTO mode settings only).
Page 668 Naming. The steps are the same. Caution Camera settings files saved by a camera other than an EOS R5 C cannot be loaded on this camera. It may not be possible to load camera settings files that were saved by a camera with a different firmware version.
Page 669 Loading Camera Settings In step 2, select [Load from card] to display up to ten camera settings files on the card. Select a file, and the camera will load it and apply the state of the settings as saved.
Page 670: Battery Information
Battery Information Registering Batteries to the Camera Labeling Batteries with Serial Numbers Checking the Remaining Capacity of a Registered Battery Not in Use Deleting the Registered Battery Information You can check the conditions of the battery you are using. By registering multiple batteries to the camera, you can check their approximate remaining capacity and usage history.
Page 671 Caution Using a genuine Canon Battery Pack LP-E6NH/LP-E6N is recommended. If you use batteries that are not genuine Canon products, the camera's full performance may not be attained or malfunction may result. Note The shutter count is the number of still photos taken.
Page 672 Registering Batteries to the Camera You can register up to six LP-E6NH/LP-E6N/LP-E6 battery packs to the camera. To register multiple batteries to the camera, follow the procedure below for each battery. Press the < > button. With the battery info. screen displayed, press the < >...
Page 673 Select [OK]. The battery is now displayed in white. Note The battery cannot be registered if the household power outlet accessories (sold separately, ) are used.
Page 674 Labeling Batteries with Serial Numbers It is convenient to label registered LP-E6NH/LP-E6N/LP-E6 battery packs with their serial numbers, using commercially available labels. On a label approx. 25×15 mm, write the serial number (1). Apply the label. Set the power switch to < >.
Page 675 Caution Do not apply the label on any part other than as shown in the illustration in step 2. Otherwise, the misplaced label may make it difficult to insert the battery or impossible to turn on the power. When you use Battery Grip BG-R10 (sold separately), the label may peel off after repeated insertion and removal from the battery magazine.
Page 676 Checking the Remaining Capacity of a Registered Battery Not in Use You can check the remaining capacity of batteries not currently in use, as well as their last date of use in PHOTO mode. Find the matching serial number. On the battery history screen, find the battery serial number (1) matching the serial number that the battery is labeled with.
Page 677 Deleting the Registered Battery Information Select [Delete info.]. Registering Batteries to the Camera, select [Delete info.] in step 2. Select the battery information to delete. [ ] is displayed. Press the < > button. Select [OK] on the confirmation screen.
Page 678: Copyright Information
Copyright Information Checking the Copyright Information Deleting the Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. Caution If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.].
Page 679 Enter text. Use the < > dial or < > to select a character, then press < > to enter it. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the < >...
Page 680 Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information.
Page 681: Other Information
Other Information Certification Logo Display Select [ : Certification Logo Display] to display some of the logos of the camera's certifications. Other certification logos can be found on the camera body and packaging. Firmware Select [ : Firmware] to update the firmware of compatible accessories in use.
Page 682: Custom Functions/My Menu
Custom Functions/My Menu You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences. You can also add menu items and Custom Functions that you adjust frequently to My Menu tabs. • Tab Menus: Customization •...
Page 683: Tab Menus: Customization
Tab Menus: Customization Custom Functions 1 Exposure level increments ISO speed setting increments Speed from metering/ISO Auto Bracketing auto cancel Bracketing sequence Number of bracketed shots Safety shift Custom Functions 2 Same expo. for new aperture AE lock meter. mode after focus Restrict shooting modes Set shutter speed range Set aperture range...
Page 684 Custom Functions 3 Dial direction during Tv/Av Control ring rotation Customize buttons Customize dials Clear customized settings Custom Functions 4 Add cropping information Default Erase option Release shutter w/o lens Retract lens on power off Add IPTC information...
Page 685 Custom Functions 5 Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings.
Page 686: Custom Function Setting Items
Custom Function Setting Items C.Fn1 C.Fn2 C.Fn3 C.Fn4 C.Fn5 You can customize camera features on the [ ] tab to suit your shooting preferences. Any settings you change from default values are displayed in blue.
Page 687 C.Fn1 Exposure level increments You can specify to use 1/2-stop increments as the increments for shutter speed, aperture value, exposure compensation, AEB, flash exposure compensation, and FEB. 1/3: 1/3-stop 1/2: 1/2-stop Note Display when set to [1/2-stop] is as follows. ISO speed setting increments You can change the manual ISO speed setting increment to a whole stop.
Page 688 Speed from metering/ISO Auto You can set the ISO speed status after the metering timer ends in cases where, for ISO Auto operation in [ ]/[ ]/[ ] mode, the camera has adjusted the ISO speed during metering or during the metering timer. : Restore Auto after metering : Retain speed after metering Bracketing auto cancel...
Page 689 Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed. When [Bracketing sequence] is set to [0, -, +], the bracketed shots will be taken as shown in the following table. 3: 3 shots 2: 2 shots 5: 5 shots 7: 7 shots...
Page 690 Safety shift If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. [Shutter speed/Aperture] applies to [ ] or [ ] mode.
Page 691 C.Fn2 Same expo. for new aperture The maximum aperture value may decrease (the lowest f/number may increase) in [ mode (manual exposure shooting) with ISO speed set manually (except when set to ISO Auto) if you (1) Change lenses, (2) Attach an extender, or (3) Use a zoom lens with a variable maximum aperture value.
Page 692 AE lock meter. mode after focus For each metering mode, you can specify whether to lock the exposure (AE lock) once subjects are in focus with One-Shot AF. The exposure will be locked while you keep pressing the shutter button halfway. Select metering modes for AE lock and add a checkmark [ ].
Page 693 Select a shooting mode. Turn the < > dial to select shooting modes, then press < > to add a checkmark [ ]. Caution Restricted shooting mode settings are not registered to [ ], [ ], or [ ] is not available with [ : Restrict shooting modes] set to [Enable].
Page 694 Set aperture range You can set the aperture value range. In [ ], [ ], [ ], or [ ] mode, you can set the aperture value manually within your specified range. In [ ] and [ ] mode, or in [ ] mode with the aperture value set to [AUTO], the aperture value is set automatically within your specified range.
Page 695 C.Fn3 Dial direction during Tv/Av Dial turning direction when setting the shutter speed and aperture value can be reversed. Reverses the turning direction of the < >, < >, and < > dial in [ ] shooting mode and only the < >...
Page 696 Select a camera control. Select a function to assign. Press < > to set it. You can configure advanced settings for functions labeled with ] in the lower left of the screen by pressing the < > button. Note : Customize buttons] settings are not cleared even if you select [ : Clear all Custom Func.
Page 697 Functions available for customization ●: Default ○: Available for customization Function ● ● 〇〇〇〇 Metering and AF start ● 〇〇〇〇〇〇〇〇 AF stop 〇〇〇〇 ● 〇〇〇〇...
Page 698 〇〇〇〇〇〇〇〇〇〇 Focus guide 〇〇〇〇〇〇〇〇〇〇 Drive mode Exposure Compensation ●: Default ○: Available for customization Function 〇〇〇〇〇〇〇〇...
Page 699 Image ●: Default ○: Available for customization Function 〇〇〇〇〇〇〇〇〇〇 Image quality 〇〇〇〇〇〇〇〇〇〇 One-touch image quality setting 〇〇〇〇〇〇〇...
Page 700 Short press: LCD 〇 illumination Long press: LCD info switching Short press: LCD ● info switching Long press: LCD illumination 〇〇〇〇〇〇〇〇〇 LCD panel illumination 〇〇〇〇〇〇〇〇〇...
Page 701 〇〇〇〇〇〇〇〇〇〇 Magnify/Reduce 〇 Image replay 〇〇〇〇〇〇〇〇〇〇 Magnify images during playback 〇〇〇〇〇 Register/recall shooting func 〇〇〇〇〇...
Page 702 Customize dials Frequently used functions can be assigned to the < >/< >/< >/< > dials. Select [ : Customize dials]. Select a camera control. Select a function to assign. Press < > to set it. You can configure advanced settings for functions labeled with ] in the lower left of the screen by pressing the <...
Page 703 Note : Customize dials] settings are not cleared even if you select [ : Clear all Custom Func. (C.Fn)]. To clear the settings, select [ : Clear customized settings].
Page 704 Functions available for dials ●: Default ○: Available for customization Function Select AF method ○ ○ ○ Direct AF point selection ○ ○ AF method (hold meter. btn) ○ Change shutter speed ○ Change aperture value ○ Exposure compensation ○ ○...
Page 705 Note < > and < > dials cannot be customized in [ ] mode. < >: Control ring on RF lenses and mount adapters.
Page 706 Clear customized settings Select [ : Clear customized settings]. Select [OK]. [Customize buttons] and [Customize dials] are restored to defaults.
Page 707 C.Fn4 Add cropping information Adding cropping information displays vertical lines for the aspect ratio specified in shooting, so that you can compose shots as if shooting with a medium- or large-format camera (6×6 cm, 4×5 inch, and so on). When you shoot, instead of cropping images recorded to the card, the camera adds aspect ratio information to images for cropping in the Digital Photo Professional (EOS software).
Page 708 Default Erase option You can set which option is selected by default in the erase menu ( ), which is accessed by pressing the < > button during image playback or during review after shooting. By setting an option other than [Cancel], you can simply press < >...
Page 709 Retract lens on power off You can set whether to retract gear-type STM lenses (such as EF40mm f/2.8 STM) automatically when the camera's power switch is set to < >. ON: Enable OFF: Disable Caution With auto power off, the lens will not retract regardless of the setting. Before detaching the lens, make sure that it is retracted.
Page 710 Add IPTC information Registering IPTC (International Press Telecommunications Council) information to the camera from EOS Utility (EOS software) enables you to record (add) this information to JPEG/HEIF/RAW still photos at the time of shooting. This is helpful in file management and other tasks using the IPTC information.
Page 711 C.Fn5 Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings except [Customize buttons] and [Customize dials]. Note Performing [ : Clear all Custom Func. (C.Fn)] does not clear settings configured in [ : Customize buttons] and [ : Customize dials].
Page 712: Tab Menus: My Menu
Tab Menus: My Menu Add My Menu tab Delete all My Menu tabs Delete all items Menu display...
Page 713: Registering My Menu
Registering My Menu Creating and Adding My Menu Tabs Registering Menu Items on My Menu Tabs My Menu Tab Settings Deleting All My Menu Tabs/Deleting All Items Menu Display Settings On the My Menu tab, you can register menu items and Custom Functions you often adjust.
Page 714 Creating and Adding My Menu Tabs Select [Add My Menu tab]. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.
Page 715 Registering Menu Items on My Menu Tabs Select [MY MENU*: Configure]. Select [Select items to register]. Register the desired items. Select an item, then press < >. Select [OK] on the confirmation screen. You can register up to six items. To return to the screen in step 2, press the <...
Page 716 My Menu Tab Settings You can sort and delete items on the menu tab, and rename or delete the menu tab itself. Sort registered items You can change the order of the registered items in My Menu. Select [Sort registered items], select an item to rearrange, then press <...
Page 717 Rename tab You can rename the My Menu tab from [MY MENU*]. Select [Rename tab]. Enter text. To delete single characters, select [ ] or press the < > button. Use the < > or < > dial or < >...
Page 718 Deleting All My Menu Tabs/Deleting All Items You can delete all the created My Menu tabs or My Menu items registered on them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ ] tab will revert to its default.
Page 719 Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the < > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ ] tab selected.
Page 720: Reference
Reference This chapter provides reference information on camera features. • Importing Images to a Computer • Using a USB Power Adapter to Charge/Power the Camera • Using a Battery Grip • Troubleshooting Guide • Error Codes • System Map • Information Display •...
Page 721: Importing Images To A Computer
Importing Images to a Computer Connecting to a Computer with an Interface Cable Using a Card Reader Connecting to a Computer via Wi-Fi You can use EOS software to import images from the camera to a computer. There are three ways to do this. Connecting to a Computer with an Interface Cable Install EOS Utility.
Page 722 Caution With a Wi-Fi connection established, the camera cannot communicate with the computer even if they are connected with an interface cable.
Page 723 Using a Card Reader You can use a card reader to import images to a computer. Install Digital Photo Professional. Insert the card into the card reader. Use Digital Photo Professional to import the images. Refer to the Digital Photo Professional Instruction Manual. Note When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Page 724 Connecting to a Computer via Wi-Fi You can connect the camera to the computer via Wi-Fi and import images to the computer Note By connecting to an FTP server, you can send images on the camera to a computer (...
Page 725: Using A Usb Power Adapter To Charge/Power The Camera
Using a USB Power Adapter to Charge/Power the Camera Using USB Power Adapter PD-E1 (sold separately), you can charge Battery Pack LP-E6NH or LP-E6N without removing it from the camera. The camera can also be powered. Note that Battery Pack LP-E6 cannot be charged this way. Charging Connect the USB power adapter.
Page 726 Connect the power cord. Connect the power cord to the USB power adapter and plug the other end into a power outlet. Charging begins, and the access lamp (1) is lit in green. ] is displayed on the LCD panel. When charging is finished, the access lamp turns off.
Page 727 If the problem persists, take the camera to the nearest Canon Service Center. The charging time required and the amount charged vary depending on ambient temperature and remaining capacity.
Page 728: Using A Battery Grip
Using a Battery Grip Attaching Batteries Using a Household Power Outlet Button and Dial Operations Using a USB Power Adapter to Charge/Power the Camera Attaching an Accessory Compatible with the Multi-Function Shoe Equipped with buttons and dials for vertical shooting, Battery Grip BG-R10 is an optional camera accessory that can power the camera with two batteries.
Page 729 Remove the battery compartment cover. Turn off the camera before removing the battery. Remove the battery compartment cover from the camera. Attach the cover to the battery grip. To remove the cover, slide the lever to release it, following the attachment procedure in reverse.
Page 730 Attach and lock the battery grip. Insert the battery grip in the camera and turn the release dial to lock it in place. Remove the battery magazine.
Page 731 Caution When reattaching the battery compartment cover to the camera, attach it opened to at least 90°. Do not touch the camera or battery grip contacts.
Page 732 Attaching Batteries Attach the batteries. Insert the batteries as shown. When only one battery is used, it can be inserted in either position. To secure the batteries, push in the direction of the arrows until they click into place. To remove the batteries, press the battery magazine lever in the direction of the arrow.
Page 733 Attach the battery magazine. Insert the battery magazine all the way in to secure it. Caution When attaching batteries, make sure the electrical contacts are clean. Wipe off any dirt on the contacts with a soft cloth. Attach batteries after attaching the battery grip to the camera. If the battery grip is attached to the camera with batteries already attached, it may prevent correct display of battery check results.
Page 734 Using a Household Power Outlet Attach the DC coupler. Attach DC Coupler DR-E6C (sold separately) the same way as the batteries. Pass the DC coupler cord through the battery magazine cord groove. Insert the battery magazine all the way in to secure it. Attach the battery magazine.
Page 735 Connect the DC coupler to the AC adapter. Securely connect the plug of the AC Adapter CA-946 (sold separately) to the connector of the DC Coupler DR-E6C. Connect the power cord. Connect the power cord to the AC adapter and insert the power plug into a power outlet.
Page 736 Button and Dial Operations To use the buttons and dials, turn the vertical-grip on/off switch (4) to ON. The buttons and dials are used the same way as corresponding buttons and dials on the camera. Shutter button < > Multi-function button <...
Page 737 Using a USB Power Adapter to Charge/Power the Camera Using USB Power Adapter PD-E1, you can charge Battery Pack LP-E6NH or LP-E6N without removing it from the battery grip. The camera can also be powered. Caution LP-E6NH and LP-E6N can be charged together. Otherwise, you can charge a single LP-E6NH or LP-E6N battery at a time.
Page 738 Charge the battery. Connect the power cord to the USB power adapter and plug the other end into a power outlet. Charging begins, and the charge lamp lights up. ] is displayed on the LCD panel. When charging is finished, the charge lamp turns off. Supplying power To power the camera without charging batteries, set the camera power switch to an option other than <...
Page 739 If the problem persists, take the camera to the nearest Canon Service Center. The charging time required and the amount charged vary depending on ambient temperature and remaining capacity.
Page 740 Attaching an Accessory Compatible with the Multi- Function Shoe For details on how to attach and use accessories, refer to the instruction manual of the accessory in use. Remove the multi-function shoe cover and slide the accessory's connecting terminal into the multi-function shoe. When attaching accessories that communicate through contacts of the multi-function shoe, insert the accessory's mounting foot until it clicks into place, then slide the mounting foot locking lever to secure it.
Page 741: Troubleshooting Guide
Sensor cleaning problems Computer connection problems If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, take the camera to the nearest Canon Service Center. Power-related problems Batteries cannot be charged with the battery charger.
Page 742 In this case, unplug the power cord, reattach the battery, and wait a few minutes before plugging it in again. If the problem persists, take the camera to the nearest Canon Service Center. The access lamp is not lit during charging with the USB power adapter.
Page 743 [Battery communication error. Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery packs other than a genuine Canon Battery Pack LP-E6NH/ LP-E6N/LP-E6. Remove and install the battery again ( If the electrical contacts are dirty, use a soft cloth to clean them.
Page 744 Shooting-related problems The lens cannot be attached. To attach EF or EF-S lenses, you will need a mount adapter. The camera cannot be used with EF-M lenses ( No images can be shot or recorded. Make sure the card is properly inserted ( Slide the card's write-protect switch to the Write/Erase setting ( If the card is full, replace the card or delete unnecessary images to make space Shooting is not possible if the AF point turns orange when you attempt to focus.
Page 745 / Number of possible shots / Maximum burst for continuous shooting is based on the standard Canon test card, and the actual maximum burst is higher for cards with faster writing speeds. For this reason, estimated maximum burst may differ from actual maximum burst.
Page 746 Expanded ISO speeds cannot be selected for still photo shooting. Check the [ISO speed range] setting under [ ISO speed settings]. Expanded ISO speeds are not available when [ : Highlight tone priority] is set to [Enable] or [Enhanced]. Expanded ISO speeds are not available when [HDR shooting ] in [ : HDR PQ settings] is set to [Enable].
Page 747 The flash always fires at full output. Flash units other than EL/EX series Speedlites used in autoflash mode always fire at full output ( When the flash Custom Function setting for [Flash metering mode] is set to [TTL flash metering] (autoflash), the flash will always fire at full output ( Flash exposure compensation cannot be set.
Page 748 Problems with wireless features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone's Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone ( Pairing with a previously paired smartphone is not possible if pairing information registered for another camera remains on the smartphone.
Page 749 Operation problems I cannot adjust settings with < >, < >, < >, < >, < >, or < >. Press the < > button to release the Multi-function lock ( Check the [ : Multi function lock] setting ( Touch operation is not possible.
Page 750 Display problems The menu screen shows fewer tabs and items. In [ ] mode, some tabs and items are not displayed. The display starts with [ ] My Menu, or the [ ] tab alone is displayed. [Menu display] on the [ ] tab is set to [Display from My Menu tab] or [Display only My Menu tab].
Page 751 The screen does not display a clear image. If the screen is dirty, use a soft cloth to clean it. The screen display may seem slightly slow in low temperatures or may look black in high temperatures, but it will return to normal at room temperature.
Page 752 Playback problems Part of the image blinks in black. : Highlight alert] is set to [Enable] ( A red box is displayed on the image. : AF point disp.] is set to [Enable] ( During image playback, the AF points are not displayed. AF points are not displayed when the following types of images are played back: •...
Page 753 Images cannot be resized or cropped. This camera cannot resize JPEG images or RAW images ( This camera cannot crop RAW images or images captured with [HDR shooting ] in [ : HDR PQ settings] set to [Enable] ( Dots of light appear on the image. White, red, or blue dots of light may appear in captured images if the sensor is affected by cosmic rays or similar factors.
Page 754 Sensor cleaning problems The shutter makes a sound during sensor cleaning. Although there is a mechanical sound from the shutter during cleaning after [Clean now ] is selected, no image is recorded to the card ( Automatic sensor cleaning does not work. Repeatedly changing the position of the power switch within a short period may prevent the [ ] icon from being displayed (...
Page 755 Computer connection problems I cannot import images to a computer. Install EOS Utility (EOS software) on the computer. Make sure the main EOS Utility window is displayed. If the camera is already connected via Wi-Fi, it cannot communicate with any computer connected with an interface cable.
Page 756: Error Codes
Error Codes (1) Error number (2) Cause and countermeasures If there is a problem with the camera, an error message will appear. Follow the on-screen instructions. If the problem persists, write down the error code (Errxx) and request service.
Page 757: System Map
System Map (12) (10) (11) (13) (14) (15) (18) (16) (17) (29) (30) (31) (20) (21) (19) (33) (37) (36) (34) (27) (28) (38) (35) (22) (23) (24) (25) (26) (39) (41) (32) (40) : Bundled accessories...
Page 758 Speedlite Transmitter ST-E2 Speedlite EL-100 Speedlite 430EX III-RT/430EX III Speedlite 470EX-AI Macro Ring Lite MR-14EX II Macro Twin Lite MT-26EX-RT Headphones GPS Receiver GP-E2 Remote Controller RC-6 (10) Wireless Remote Control BR-E1 (11) Remote Switch RS-80N3 (12) Timer Remote Controller TC-80N3 (13) RF lenses (14)
Page 759 (37) USB port (38) Card slot (39) Ethernet port (40) Wireless LAN adapter (41) Computer * 1: Cables connected to the PC terminal when using a flash unit should be no longer than 2.5 m (8.2 ft.). * 2: Cables connected to the headphone terminal should be no longer than 2.5 m (8.2 ft.). * 3: Battery Pack LP-E6N/LP-E6 can also be used.
Page 760: Information Display
Information Display LCD Panel Still Photo Shooting Screen Scene Icons Playback Screen LCD Panel Still photo standby screen 1 (10) (11) (12) (13) Multi-function lock Shooting mode Battery level WFT battery level Flash exposure compensation Exposure compensation Bluetooth function Wi-Fi function/WFT status (wireless)/WFT status (wired) Shutter speed (10) Aperture value...
Page 761 Still photo standby screen 2 Drive mode AF method AF operation Card slot White balance Metering mode Picture Style...
Page 762 Still Photo Shooting Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied. (11) (12) (13) (14) (15) (16) (17) (18) (19) (20) (21) (10) Maximum burst Number of available shots/Sec.
Page 763 (22) (23) (31) (32) (24) (25) (33) (34) (26) (35) (27) (28) (36) (29) (37) (30) (38) (39) (22) AEB/FEB (23) View Assist (24) HDR PQ (25) Flash ready/FE lock/High-speed sync (26) Electronic shutter (27) Touch Shutter/Create folder (28) AE lock (29) Shutter speed/Multi-function lock warning (30)
Page 764 Scene Icons In [ ] shooting mode, the camera detects the type of scene and sets all settings accordingly. The detected scene type is indicated in the upper left of the screen. People Subjects Other Than People Subject Background Nature/ Color In Motion Outdoor...
Page 765 Playback Screen Basic information display for still photos HDR output status/View Assist Bluetooth function Wi-Fi signal strength Wi-Fi function Battery level Current image no./Total images/No. of images found Shutter speed Aperture value Exposure compensation amount (10) Already sent to a computer/smartphone (11) Voice memo (12)
Page 766 Caution If the image was taken by another camera, certain shooting information may not be displayed. It may not be possible to play back images taken with this camera on other cameras.
Page 767 Detailed information display for still photos (10) (11) (12) (13) (14) (15) (16) (17) Aperture value Picture Style/Settings Shutter speed White balance correction/Bracketing Shooting mode/Multiple exposure/Frame Grab White balance Auto Lighting Optimizer Image quality/Edited image/Cropping Exposure compensation amount (10) Shooting date and time (11) Histogram (Brightness/RGB) (12)
Page 768: Ef Lenses Supporting 12 Shots/Sec. Continuous Shooting
EF Lenses Supporting 12 Shots/Sec. Continuous Shooting The following EF lenses support 12 shots/sec. continuous shooting in [ ] drive mode. EF24mm f/2.8 IS USM EF28mm f/2.8 IS USM EF35mm f/1.4L II USM EF35mm f/2 IS USM EF40mm f/2.8 STM EF50mm f/1.8 STM EF85mm f/1.4L IS USM EF100mm f/2.8L Macro IS USM...
Page 769 EF100-400mm f/4.5-5.6L IS II USM EF200-400mm f/4L IS USM Extender 1.4X EF-S24mm f/2.8 STM EF-S35mm f/2.8 Macro IS STM EF-S10-18mm f/4.5-5.6 IS STM EF-S15-85mm f/3.5-5.6 IS USM EF-S18-55mm f/3.5-5.6 IS STM EF-S18-55mm f/4-5.6 IS STM EF-S18-135mm f/3.5-5.6 IS USM EF-S18-135mm f/3.5-5.6 IS STM EF-S55-250mm f/4-5.6 IS STM...
Page 770: Specifications
Lens mount: Canon RF mount Compatible lenses: Canon RF lens group * Using mount adapter EF-EOS R: Canon EF or EF-S lenses (excluding EF-M lenses) Lens focal length: Same as the focal length indicated on the lens * Using EF-S lenses: Approx. 1.6 times the indicated focal length...
Page 771 Still photo recording Still photo pixel count Recorded pixels Image quality Aspect ratio 1.6x (crop) 16:9 Approx. 44.8 Approx. 17.3 Approx. 29.8 Approx. 39.8 Approx. 37.7 megapixels megapixels megapixels megapixels megapixels (8192×5464) (5088×3392) (5456×5456) (7280×5464) (8192×4608) Approx. 22.5 Approx. 15.0 Approx.
Page 772 * 1: The number of possible shots and maximum burst (SD card) apply to a UHS-I compliant 32 GB SD card based on Canon testing standards. The number of possible shots and maximum burst (SD card [Hi-speed]) apply to a UHS-II compliant 32 GB SD card based on Canon testing standards.
Page 773 Built-in and external microphones Built-in microphone: Monaural microphone External microphone: 3.5 mm diameter stereo mini jack Recording media Recording media: CFexpress card SD card * Compatible with UHS-II Viewfinder Type: OLED color electronic viewfinder Screen size: 0.5 inch Dot count: Approx. 5,760,000 dots Magnification / angle of view: Approx.
Page 774 (AI Focus AF) * Set automatically in A+ mode Manual focus Supported Lens compatibility based on AF area: Refer to the Canon website Number of AF zones available for automatic selection AF area Horizontal: Approx. 100%, Vertical: Approx. 100% Number of AF Still photos Max.
Page 775 Exposure control Metering functions under various shooting conditions Item Still photo shooting Metering sensor 384 zone (24×16) metering using image sensor output signals Evaluative metering Partial metering Yes: (Approx. 6.1%) of the screen Metering mode Spot metering Yes: (Approx. 3.1%) of the screen Center-weighted average Metering brightness range (At...
Page 776 ISO Auto details in still photo shooting Shooting mode No flash Using flash ISO 100–12800 ISO 100–6400 *1*2 *1*2 *2*3 ISO 100 –51200 ISO 100 –6400 ISO 400 ISO 400 * 1: ISO 200 when [ : Highlight tone priority] is set to [Enable] or [Enhanced]. * 2: Varies depending on [Maximum] and [Minimum] of [Auto range].
Page 777 Shutter Still photo shooting Type: Electronically controlled focal-plane shutter Shutter mode Mechanical shutter Electronic 1st curtain Electronic shutter Shutter speed When [Mechanical] or [Elec. 1st- 1/8000–30 sec., Bulb curtain] is set When [Electronic] is set 1/8000–0.5 sec. X-sync speed Mechanical shutter 1/200 sec.
Page 778 External flash Sync contacts: Multi-function shoe: X-sync contact * Max. flash sync speed: 1/250 sec. with elec. 1st-curtain, 1/200 sec. with mechanical shutter. Drive Drive mode and continuous shooting speed Drive modes Mechanical shutter Electronic 1st curtain Electronic shutter Single shooting High-speed continuous shooting+ Max.
Page 779 Print order (DPOF): Compliant with DPOF Version 1.1 Customization (C.Fn) Custom Function: 22 Custom Functions are settable External interface Digital terminal Terminal type: USB Type-C Transmission: SuperSpeed Plus USB (USB 3.1 Gen 2) equivalent Applications: For computer communication For in-camera charging / powering the camera with USB Power Adapter PD-E1 HDMI output terminal: HDMI micro OUT terminal (Type D) External microphone input terminal: Compatible with the 3.5 mm diameter stereo mini plug...
Page 780 Power source Battery Compatible battery packs LP-E6NH/LP-E6N/LP-E6 Quantity used USB battery charging and camera power: Using USB Power Adapter PD-E1 AC power source AC adapter CA-946 DC coupler DR-E6C Possible shots Battery life (Approx. number of shots) Configuration Shooting method Battery Temperature Smooth...
Page 781 Battery information In 1% increments Remaining capacity 5-level indicator Number of shots Supported Recharge performance 3 levels Battery registrations Supported (up to 6) Battery information Serial number, remaining capacity when removed, date...
Page 782 Dimensions and weight Dimensions (W)×(H)×(D) Approx. 142×101×111 mm (W)×(H)×(D) Approx. 5.6×4.0×4.4 in. * Excluding protrusions. Weight Body (including battery and memory Approx. 770 g Approx. 1.7 lb. card) Body only Approx. 680 g Approx. 1.5 lb. * Weighed without body cap. * With a CFexpress card and an SD card.
Page 783 Wi-Fi (Wireless LAN) communication Compliance standards Wi-Fi compliance standards Transmission method Maximum link speed IEEE802.11b DS-SS modulation 11 Mbps IEEE802.11g 54 Mbps IEEE802.11n 72.2 Mbps OFDM modulation IEEE802.11a 54 Mbps IEEE802.11ac 86.7/200/433.3 Mbps Transmission frequency (Center frequency) 2.4 GHz band Frequency 2412 to 2462 MHz Channels...
Page 784 Compliance standards: Bluetooth Specification Version 5.0 compliant (Bluetooth Low Energy technology) Transmission method: GFSK modulation All data above is based on Canon testing standards and CIPA (Camera & Imaging Products Association) testing standards and guidelines. Dimensions and weight listed above are based on CIPA Guidelines (except weight for camera body only).
Page 785: Trademarks And Licensing
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license. Other trademarks and trade names are those of their respective owners. USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum.
Page 786 This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).
Page 787 Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Europa N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands http://www.canon-europe.com The information in this document is verified as of January 2022. Subject to change without notice. Visit your local Canon website to download the latest version.

Canon EOS R5 C User Manual

Quick Links

Related Manuals for Canon EOS R5 C

Summary of Contents for Canon EOS R5 C