Canon EOS RP Instruction Manual page 702

Reconnecting via Wi-Fi
[D] Computer
On the computer, start the EOS software.
z
If the computer's connection destination has been changed, restore
z
the setting to connect via Wi-Fi to the camera or the same access
point as the camera.
When directly connecting the camera to a computer via Wi-Fi,
"_ C anon0A" is displayed at the end of the SSID.
[l] Printer
If the printer's connection destination has been changed, restore the
z
setting to connect via Wi-Fi to the camera or the same access point
as the camera.
When directly connecting the camera to a printer via Wi-Fi,
"_ C anon0A" is displayed at the end of the SSID.
494