Setting Auto Cleaning
For best results, clean with the camera in a stable position on a desk or other
o
flat surface.
Even if you repeat the sensor cleaning, the result will not improve much. Note
o
that [Clean now f ] may not be available immediately after cleaning.
Dots of light may appear in captured images or on the shooting screen if
o
the sensor is affected by cosmic rays or similar factors. By selecting [Clean
now f ], their appearance may be suppressed ( = 382).
1
Select [Auto cleaningf].
2
Select an item.
Use the < Y > < Z > keys to select an
z
item, then press < 0 >.
Sensor Cleaning
383