Canon EOS RP Instruction Manual page 338

Auto Exposure Bracketing (AEB)
If [ z : Auto Lighting Optimizer] ( = 136) is set to any setting other than
o
[Disable], the effect of AEB may be reduced.
< A > blinks in the lower left of the screen during AEB shooting.
o
If the drive mode is set to < u >, press the shutter button three times for each
o
shot. When < o > or < i > is set and you hold down the shutter button
completely, the three bracketed shots will be taken consecutively and the
camera will automatically stop shooting. When < m > or < l > is set, the
three bracketed shots will be taken consecutively after a 10-sec. or 2-sec.
delay. When set to < q >, three times the specified number of shots are taken
in continuous shooting.
You can set AEB in combination with exposure compensation.
o
AEB cannot be used with flash, Multi Shot Noise Reduction, focusing
o
bracketing, or in HDR mode.
AEB will be canceled automatically if you do any of the following: Setting the
o
power switch to < 2 > or when the flash is fully charged.
130