Canon EOS RP Instruction Manual page 546

Cropping JPEG Images
Moving the Cropping Frame
z
Press the < V > cross keys to move the frame vertically or horizontally.
Move the cropping frame until it covers the desired image area.
Correcting the Tilt
z
You can correct image tilt by ±10°. Turn the < 5 > dial to select < c >,
then press < 0 >. While checking the tilt against the grid, turn the < 5 >
dial (in 0.1° increments) or tap the left or right wedge (in 0.5° increments)
on the upper left of the screen to correct the tilt. After completing the tilt
correction, press < 0 >.
The position and size of the cropping frame may change depending on the
o
angle set for tilt correction.
Once a cropped image is saved, it cannot be cropped again or resized.
o
AF point display information ( = 352) and Dust Delete Data ( = 161) will not
o
be appended to the cropped images.
338
4
Check the image area to be
cropped.
Turn the < 5 > dial to select < b >.
z
The image area to be cropped will be
g
displayed.
5
Save the image.
Turn the < 5 > dial to select < W >.
z
Select [OK] to save the cropped image.
z
Check the destination folder and image
z
file number, then select [OK].
To crop another image, repeat steps 2 to
z
5.