Canon EOS RP Instruction Manual page 277

Subject movement (whether subjects are still or moving) may not be detected
o
correctly for some subject or shooting conditions.
If you normally prefer to shoot with One-Shot AF, set [ z : A Auto servo] to
o
[Disable].
AF operation (One-Shot AF or Servo AF) is set automatically when you press
o
the shutter button halfway. Note that AF operation cannot be switched during
shooting.
The < A > mode makes the colors look more impressive in nature, outdoor,
o
and sunset scenes. If you do not obtain the desired color tones, change the
mode to a Creative Zone mode ( = 35) and select a Picture Style other than
< D >, then shoot again ( = 148).
Fully Automatic Shooting (Scene Intelligent Auto)
4
Focus on the subject.
Press the shutter button halfway to
z
focus.
You can also focus by touching a
z
person's face or another subject on
the screen (Touch AF) when [ z :
Continuous AF] is set to [Disable].
Under low light, the AF-assist beam
z
( = 201) is automatically activated if
needed.
For stationary subjects, the AF point is
g
displayed in green when the subject is in
focus, and the camera beeps (One-Shot
AF).
For moving subjects, the AF point is
g
displayed in blue and tracks subject
movement. The camera does not beep
(Servo AF).
5
Take the picture.
Press the shutter button completely to
z
take the picture.
The image just captured will be
g
displayed for approx. 2 sec. on the
screen.
69