Canon EOS RP Instruction Manual page 478

Hide thumbs Also See for EOS RP:
Table of Contents

Advertisement

Recording Time-lapse Movies
Do not point the camera toward an intense light source, such as the sun or an
o
intense artificial light source. Doing so may damage the image sensor or the
camera's internal components.
Time-lapse movies cannot be recorded when the camera is connected to a
o
computer with the interface cable, or when an HDMI cable is connected.
Movie Servo AF will not function.
o
If the shutter speed is 1/30 sec. or slower, the exposure of the movie may not
o
be displayed properly (may differ from that of the resulting movie).
Do not zoom the lens during time-lapse movie recording. Zooming the lens
o
may cause the image to be out of focus, the exposure to change, or the lens
aberration correction not to function properly.
When recording a time-lapse movie under a flickering light, noticeable image
o
flickering, horizontal stripes (noise), or irregular exposures may be recorded.
Images that are displayed while time-lapse movies are being recorded
o
may look different from the resulting movie. (For example, there may be
inconsistent brightness from flickering light sources, or noise from a high ISO
speed.)
When recording a time-lapse movie under low light, the image displayed
o
during shooting may look different from what is actually recorded in the movie.
In such cases, the < g > icon will blink.
If you move the camera from left to right (panning) or shoot a moving subject
o
during time-lapse movie recording, the image may look extremely distorted.
During time-lapse movie recording, auto power off will not take effect. Also,
o
you cannot adjust the shooting function and menu function settings, play back
images, etc.
Sound is not recorded for time-lapse movies.
o
With time-lapse movie recording, you can press the shutter button completely
o
to start or stop the movie recording regardless of the [ 5 : Shutter btn
function for movies] setting.
With [Interval] set to less than 3 sec. and [Auto exposure] set to [Each
o
frame], if the brightness differs greatly from the preceding shot, the camera
may not shoot at the set interval.
270

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents