Canon EOS RP Instruction Manual page 376

Multiple Exposures
Merging Multiple Exposures with an Image Recorded on the
Card
You can select a RAW image recorded on the card as the first single
exposure. The image data of the selected RAW image will remain intact.
Only 1 or F images can be used. JPEG images cannot be
selected. Images you can specify also vary depending on the lens attached.
For details, see the table below.
Images You Can Select
z
Lens Attached
RF/
EF lens
EF-S lens
These images cannot be selected as the first single exposure: Images
o
captured with [ z : Highlight tone priority] set to [Enable] or [Enhanced], or
images captured with [ z : z Cropping/aspect ratio] not set to [Full-frame]
or [1.6x (crop)].
[Disable] is applied for [ z : Lens aberration correction] and [ z : Auto
o
Lighting Optimizer] regardless of the settings of the image selected as the
first single exposure.
168
1
Select [Select image for multi.
expo.].
2
Select the first image.
z
z
g
3
Take the picture.
z
Cropped
Shooting
Off RAW images captured at full size
On
RAW images from cropped shooting or taken with an
EF-S lens
–
Use the < Y > < Z > keys to select the
first image, then press < 0 >.
Select [OK].
The file number of the selected image
will be displayed at the bottom of the
screen.
When you select the first image, the
number of remaining exposures as set
with [No. of exposures] will decrease
by 1.
Selectable Images