Canon EOS RP Instruction Manual page 262

Basic Operations
Shutter Button
The shutter button has two steps. You can press the shutter button halfway.
Then you can further press the shutter button completely.
Preventing Camera Shake
z
Hand-held camera movement during the moment of exposure is called
camera shake. It can cause blurred pictures. To prevent camera shake,
note the following:
Hold the camera steady.
Press the shutter button halfway to autofocus, then slowly press the
shutter button completely.
If you press the shutter button completely without pressing it halfway first, or if
o
you press the shutter button halfway and then press it completely immediately,
the camera will take a moment before it takes the picture.
Even during menu display or image playback, you can go back to shooting-
o
ready state by pressing the shutter button halfway.
54
Pressing Halfway
This activates autofocusing and the
automatic exposure system that sets the
shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed on the screen or in
the viewfinder for approx. 8 sec. or as set
for the metering timer.*
* By default, the metering timer is set to 8 sec.
Pressing Completely
This action shoots.