Teledyne XTRX500 User Manual page 49

E. Sample Preparation
Step 10
Add Event.
Selecting Add Event saves the event data already inputted and
goes to Add Event screen
Step 11
In the Add Event menu the option of adding another action event
or adding a pause event is available.
An Action Event involves running the crusher and/or mixer for a
set period of time as already described in Step 6 - 10.
A Pause event allows the addition of another or further solvent
as required.
The XTRX500 programming will not allow the maximum amount
of solvent added to exceed the capacity of the extraction pouch
used.
In both the Action Event and Pause Event menu there is the
option to Delete Event.
46-208-208 Rev. B—XTRX500 User Guide E-11