Step 7 - Teledyne XTRX500 User Manual

E. Sample Preparation
The run can be stopped and resumed as many times as
required. From the Pouch Status screen either New Event or
Finished can be selected.
If Finished is selected, then the XTRX500 returns to the
home/start up screen.
If New Event is selected the XTRX500 returns to the Immediate
Mode screen. The Immediate Mode can be re-run up to a
maximum of 30 times, this can be useful for dissolution method
development.
If the run is stopped and cancelled the Pouch Status screen is
displayed with the last event showing Stopped by user.
If Finished is selected the XTRX500 returns to the home/Start
up screen.

Step 7

If it is decided not to run the Immediate Mode, Cancel is
selected and the XTRX500 returns to the home/start up screen.
46-208-208 Rev. B—XTRX500 User Guide E-6