Teledyne XTRX500 User Manual page 12

46-208-208 Rev. B—XTRX500 User Guide
Recommendations for Using This Manual
Teledyne Hanson recommends the following steps for making
best use of this user guide:
1. Review the introduction section for an overview of the
instrument.
2. Carefully review and follow all safety instructions.
3. Unpack, inspect, and install the instrument according to
instructions in the installation section.
4. Conduct an initial test of the system using the
procedures outlined in the operation section.
5. Review the maintenance and troubleshooting sections to
become familiar with keeping the instrument in good
working condition.
6. Immediately contact Teledyne Hanson Technical Support
with any questions on how to properly operate and
maintain the sample preparation extractor.
A. Introduction
A-7