ATEN ES0152 User Manual page 78

ES0152 / ES0152P CLI User Manual
Syntax:
No ip arp inspection
No ip arp inspection entry interface { * | [ Gigabitethernet <port_id> ] }
<vlan_id> <mac_ucast> <ipv4_ucast>
No ip arp inspection vlan <vlan_list> logging
No dhcp pool <vlan_id>
No ip dhcp relay information [ option | policy ]
No ip dhcp relay
No ip dhcp snooping
No ip helper-address
No ip igmp host-proxy
No ip igmp snooping
No ip igmp unknown-flooding
No ip name-server
No ip route <ipv4_addr> <ipv4_netmask> <ipv4_ucast>
No ip source binding interface { [ * | Gigabitethernet ] <port_id> <ipv4_ucast>
<mac_ucast> }
No ip verify source
Parameters:
Parameter
Arp
DHCP
Helper-address
IGMP
Name-server
Route
Source
Verify
Inspection
Entry
VLAN
Interface
66
Description
Address Resolution Protocol.
Dynamic Host Configuration Protocol.
DHCP helper server address.
Set IGMP.
Domain Name System.
Add IP route.
Source command.
Verify command.
ARP inspection.
Arp inspection entry.
Arp inspection vlan setting.
Select an interface to configure.