ATEN ES0152 User Manual page 284

ES0152 / ES0152P CLI User Manual
COMMAND
smtp sender <word47>
smtp username <word31> <word31>
smtp server <word47>
smtp level <0-7>
show snmp
show snmp community v3 [ <word127> ]
show snmp user [ <word32> <word10-32> ]
show snmp security-to-group [ { v1 | v2c |
v3 } <word32> ]
show snmp access [ <word32> { v1 | v2c |
v3 | any } { auth | noauth | priv } ]
show snmp view [ <word32> <word255> ]
snmp-server
snmp-server engine-id local <word10-32>
no snmp-server engined-id local
snmp-server version { v1 | v2c | v3 }
no snmp-server version
snmp-server community v2c <word127> [
ro | rw ]
snmp-server community v3 <word127> [
<ipv4_addr> <ipv4_netmask> ]
no snmp-server community v2c
no snmp-server community v3 <word127>
272
DESCRIPTION
Enable SNMP server.
To specify SNMP
server's engine ID.
To set SNMP server's
engine ID to default
value.
Set the SNMP server
version to SNMPv1,
SNMPv2c or SNMPv3.
Set SNMP server's
version to default set-
ting.
P M
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
15 EXEC
15 EXEC
GLOBAL
13
_CONFIG
GLOBAL
13
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG