Table of Contents
Advertisement
COMMAND
username <word31> privilege <0-15>
password encrypted <word4-44>
username <word31> privilege <0-15>
password none
no username <word31>
vlan protocol {{eth2 {<0x600-
0xffff>|arp|ip|ipx|at}} | {snap {<0x0-
0xffffff>|rfc-1042|snap-8021h} <0x0-0xffff>}
| {llc <0x0-0xff> <0x0-0xff>} } group
<word16>
switchport vlan mac <mac_ucast> vlan
<vlan_id>
switchport vlan protocol group <word16>
vlan <vlan_id>
show vlan protocol [eth2 {<0x600-
0xffff>|arp|ip|ipx|at}] [snap {<0x0-
0xffffff>|rfc-1042|snap-8021h} <0x0-0xffff>]
[llc <0x0-0xff> <0x0-0xff>]
show vlan mac [address <mac_ucast>]
show vlan ip-subnet [id <1-128>]
Chapter 25. CLI COMMAND REFERENC-
DESCRIPTION
Use the username
<username> privilege
<level> password
encrypted <pass-
word> global configu-
ration command to add
a user with encrypted
password for the local
switch access.
Use the username
<username> privilege
<level> password none
global configuration
command to remove
the password for spe-
cific username.
Use the no username
<username> global
configuration com-
mand to delete a local
user.
Use the switchport vlan
mac command to
associate a MAC
address to VLAN ID.
Use the no form of this
command to remove
the group to vlan map-
ping.
Use the switchport vlan
protocol group com-
mand to add group to
vlan mapping.
P
M
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
13
_CONFIG
INTER-
FACE_P
13
ORT_LIS
T
INTER-
FACE_P
13
ORT_LIS
T
13
EXEC
13
EXEC
13
EXEC
281
Advertisement
Table of Contents
