ATEN ES0152 User Manual page 209

52-port gbe (poe) managed switch, cli
Hide thumbs Also See for ES0152:
Table of Contents

Advertisement

Parameter
Address
<mac_ucast>
Eth2
LLC
Snap
<ethernet value>
<dsap value>
<ssap value>
<snap oui>
<pid value>
Admin
All
Combined
Gvrp
Interface
Mstp
Mvr
Nas
Vcl
Voice-VLAN
*
Gigabitethernet
<port_list>
Example:
ES0152# show vlan status all interface GigabitEthernet
1/4
GigabitEthernet 1/4 :
---------------------
VLAN User PortType
---------
Admin
NAS
Description
Show a specific MAC entry.
The specific MAC entry to show.
Ethernet protocol based VLAN status.
LLC-based VLAN group.
SNAP-based VLAN group.
Ether Type(Range: 0x600 - 0xFFFF).
DSAP(Range: 0x00 - 0xFF).
SSAP(Range: 0x00 - 0xFF).
SNAP OUI(must be 0x000000).
PID(Range: 0x0000 - 0XFFFF).
Show the VLANs configured by administrator.
Show all VLANs configured.
Show the VLANs configured by a combination.
Show the VLANs configured by GVRP.
Show the VLANs configured for a specific interface.
Show the VLANs configured by MSTP.
Show the VLANs configured by MVR.
Show the VLANs configured by NAS.
Show the VLANs configured by VCL.
Show the VLANs configured by Voice VLAN.
All Switches or All ports.
GigabitEthernet.
Port List S/X-Y,Z (1/1-52).
-------------
C-Port
Chapter 22. SHOW of CLI
PVID Frame Type
----
-------------
1
All
Ing Filter
--------
Enabled
197

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es0152p

Table of Contents