ATEN ES0152 User Manual page 257

COMMAND
lldp med datum { wgs84 | nad83-navd88 |
nad83-mllw }
no lldp med datum
lldp med fast <1-10>
no lldp med fast
lldp med media-vlan-policy <0-31> { voice |
voice-signaling | guest-voice-signaling |
guest-voice | softphone-voice | video-con-
ferencing | streaming-video | video-signal-
ing } { tagged <vlan_id> | untagged } [l2-
priority <0-7>] [dscp <0-63>]
no lldp med media-vlan-policy <0~31>
lldp med media-vlan policy-list <range_list>
loop-protect
loop-protect transmit-time <1-10>
no loop-protect transmit-time
loop-protect shutdown-time <0-604800>
no loop-protect shutdown-time
Chapter 25. CLI COMMAND REFERENC-
DESCRIPTION
Use the lldp med
datum to configure the
datum (geodetic sys-
tem) to use.
Use the lldp med fast
to configure the num-
ber of times the fast
start LLDPDU are
being sent during the
activation of the fast
start mechanism
defined by LLDP-MED
(1-10).
Use the media-vlan-
policy to create a pol-
icy, which can be
assigned to an inter-
face.
Use the media-vlan
policy-list to assign pol-
icy to the interface.
Loop protection config-
uration
Loop protection trans-
mit time interval
Loop protection shut-
down time interval
P M
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
INTER-
FACE_P
15
ORT_LIS
T
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
245