Table of Contents
Advertisement
LLDP holdtime <2-10>
LLDP med datum [ wgs84 | nad83_navd88 | nad83_mllw ]
LLDP med fast <1-10>
LLDP med location-tlv altitude [ meters | floors ] <-32767-32767>
LLDP med location-tlv civic-addr [ country | state | county | city | district |
block | street | leading-street-direction | trailing-street-suffix | street-suffix |
house-no | house-no-suffix | landmark | additional-info | name | zip-code |
building | apartment | floor | room-number | place-type | postal-community-
name | p-o-box | additional-code ] [ word50 | word2 ]
LLDP med location-tlv elin-addr <phone_call_str>
LLDP med location-tlv latitude [ north | south ] <0-90>
LLDP med location-tlv longitude [ west | east ] <0-180>
LLDP med media-vlan-policy <0-31> { voice | voice-signaling | guest-voice-
signaling | guest-voice | softphone-voice | video-conferencing | streaming-
video | video-signaling } { tagged <1-4095> | untagged } [ l2-priority <0-7> ]
[ dscp <0-63> ]
LLDP reinit <1-10>
LLDP timer <5-32768>
LLDP transmission-delay <1-8192>
Parameters:
Parameter
Holdtime
Med
Reinit
Timer
Transmission-delay
<2-10>
Datum
Fast
Location-tlv
Media-VLAN-policy
Nad83_mllw
Chapter 5. CONFIGURE Commands of CLI
Description
Sets LLDP hold time.
Media Endpoint Discovery.
Sets LLDP reinit time.
Sets LLDP TX interval.
Sets LLDP transmision-delay.
The neighbor switch will discarded the LLDP information
after hold time multiplied with timer seconds (2..10).
Datum type.
Number of times to repeat LLDP frame transmission at
fast start.
LLDP-MED Location Type Length Value parameter.
Use the media-vlan-policy to create a policy, which can be
assigned to an interface.
Mean lower low water datum 1983.
49
Advertisement
Table of Contents
