Table of Contents
Advertisement
Parameter
Entry
VLAN
Interface
*
GigabitEthernet
<port_id>
<vlan_id>
<mac_ucast>
<ipv4_ucast>
<vlan_list>
Logging
All
Deny
Permit
Pool
Relay
Snooping
<vlan_id>
Information
Option
Policy
Drop
Keep
Replace
<ipv4_ucast>
Snooping
Host-proxy
Unknown-flooding
Ssm-range
<ipv4_mcast>
<4-32>
<ipv4_ucast>
Description
Arp inspection entry.
Arp inspection vlan setting.
Select an interface to configure.
All switches or All ports.
GigabitEthernet.
Port ID in (1/1-52).
Select a VLAN id to configure (1-4095).
Select a MAC address to configure.
Select an IP Address to configure (X.X.X.X).
Arp inspection vlan list (1-4095).
ARP inspection vlan logging mode config.
Log all entries.
Log denied entries.
Log permitted entries.
DHCP server pool.
DHCP relay.
DHCP snooping.
VLAN id of DHCP server pool (1-4095).
DHCP information option <Option 82>.
DHCP option 82.
Policy for handling the receiving DHCP packet already include
the information option.
Drop the package.
Keep the original relay information.
Replace the original relay information.
IP Address (X.X.X.X).
Snooping IGMP.
IGMP proxy configuration.
Flooding unregistered IPv4 multicast traffic.
IPv4 address range of Source Specific Multicast.
Valid IPv4 multicast address (X.X.X.X).
Prefix length ranges from 4 to 32.
A valid IPv4 unicast address (X.X.X.X).
Chapter 5. CONFIGURE Commands of CLI
45
Advertisement
Table of Contents
