ATEN ES0152 User Manual page 119

Syntax:
Udld [ aggressive | enable | message ]
Parameters:
Parameter Description
Aggressive Enables UDLD in aggressive mode on all fiber-optic ports.
Enable Enables UDLD in normal mode on all fiber-optic ports.
Message Configures the period of time between UDLD probe messages on
ports that are in the advertisement phase and are determined to be
bidirectional. The range is from 7 to 90 seconds(Currently default
message time interval 7 sec is supported).
Example:
ES0152(config)# udld aggressive
% Only fiber ports are allowed, port_no: 1
% Only fiber ports are allowed, port_no: 2
% Only fiber ports are allowed, port_no: 3
% Only fiber ports are allowed, port_no: 4
% Only fiber ports are allowed, port_no: 5
% Only fiber ports are allowed, port_no: 6
% Only fiber ports are allowed, port_no: 7
% Only fiber ports are allowed, port_no: 8
% Only fiber ports are allowed, port_no: 9
% Only fiber ports are allowed, port_no: 10
% Only fiber ports are allowed, port_no: 11
% Only fiber ports are allowed, port_no: 12
% Only fiber ports are allowed, port_no: 13
% Only fiber ports are allowed, port_no: 14
% Only fiber ports are allowed, port_no: 15
% Only fiber ports are allowed, port_no: 16
% Only fiber ports are allowed, port_no: 17
% Only fiber ports are allowed, port_no: 18
% Only fiber ports are allowed, port_no: 19
% Only fiber ports are allowed, port_no: 20
Chapter 5. CONFIGURE Commands of CLI
107