ATEN ES0152 User Manual page 189

Show poe power-delay interface { * | [ GigabitEthernet <port _list> ] }
Show poe profile
Show poe profile id <1-16>
Show poe status
Show poe status interface { * | [ GigabitEthernet <port _list> ] }
Parameters:
Parameter Description
Status Display PoE (Power Over Ethernet) status for the switch.
Config Display PoE (Power Over Ethernet) config for the switch.
Auto-check Display PoE Auto Checking config for the switch.
Power-delay Display PoE (Power Over Ethernet) Power Delay config for the
switch.
Profile Poe scheduling profile.
Interface Interface status and configuration.
* All Switches or All ports.
Gigabitethernet GigabitEthernet
<port_list> Port List S/X-Y,Z (1/1-52).
ID Show poe profile.
<1-16> Profile id (1..16).
Example:
ES0152# show poe status interface GigabitEthernet 1/1-2
Interface
----------------------
GigabitEthernet 1/1
GigabitEthernet 1/2
Total
ES0152# show poe status interface GigabitEthernet 1/1-2
Interface
PD Class
--------
Power Power
Alloc [W] Used[W] Used[mA] Priority
Chapter 22. SHOW of CLI
Port Status
-------------------
- No PD detected
- No PD detected
Current
177