ATEN ES0152 User Manual page 56

52-port gbe (poe) managed switch, cli
Hide thumbs Also See for ES0152:
Table of Contents

Advertisement

ES0152 / ES0152P CLI User Manual
Syntax:
IP arp inspection
IP arp inspection entry interface [ * | GigabitEthernet <port_id> ] <vlan_id>
<mac_ucast> <ipv4_ucast>
IP arp inspection vlan <vlan_list>
IP arp inspection vlan <vlan_list> logging [ deny | permit | all ]
IP dhcp pool <vlan_id>
IP dhcp relay
IP dhcp relay information option
IP dhcp relay information policy { drop | keep | replace }
IP dhcp snooping
IP helper-address <ipv4_ucast>
IP igmp snooping
IP igmp host-proxy
IP igmp ssm-range <ipv4_mcast> <4-32>
IP igmp unknown-flooding
IP name-server { <ipv4_ucast> | [ dhcp interface vlan <vlan_id> ] }
IP route <ipv4_addr> <ipv4_netmask> <ipv4_ucast>
IP source binding interface [ * | GigabitEthernet <port_id> ] <ipv4_ucast>
<mac_ucast>
IP verify source
Parameters:
Parameter
Arp
DHCP
Helper-address
IGMP
Name-server
Route
Source
Verify
Inspection
44
Description
Address Resolution Protocol.
Dynamic Host Configuration Protocol.
DHCP helper server address.
Internet Group Management Protocol.
Domain Name System.
Add IP route.
Source command.
Verify command.
ARP inspection.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es0152p

Table of Contents