Table of Contents
Advertisement
COMMAND
green-ethernet fan temp-on <-127-127>
no green-ethernet fan temp-on
green-ethernet fan temp-max <-127-127>
no green-ethernet fan temp-max
green-ethernet led interval <0~24> inten-
sity <0-100>
no green-ethernet led interval <0~24>
green-ethernet led on-event { [ link-change
<0-65535> ] [ error ] }*1
no green-ethernet led on-event [ link-
change ] [ error ]
show green-ethernet eee [interface <port_-
type_list>]
show green-ethernet short-reach [interface
<port_type_list>]
show green-ethernet energy-detect [inter-
face <port_type_list>]
show green-ethernet [interface <port_-
type_list>]
green-ethernet eee
Chapter 25. CLI COMMAND REFERENC-
DESCRIPTION
Sets temperature at
which to turn fan on to
the lowest speed.
Sets temperature at
which to turn fan on to
the lowest speed to
default.
Sets temperature
where the fan must be
running at full speed.
Sets temperature at
which the fan shall be
running at full speed to
default.
Use green-ethernet led
interval to configure
the LED intensity at
specific interval of the
day.
Use green-ethernet led
on-event to configure
when to turn LEDs
intensity to 100%%.
Shows Green Ether-
net EEE status.
Shows Green Ether-
net short-reach status.
Shows Green Ether-
net energy-detect sta-
tus.
Shows Green Ether-
net status.
Sets EEE mode.
P
M
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
15
EXEC
15
EXEC
15
EXEC
15
EXEC
INTER-
FACE_P
15
ORT_LIS
T
231
Advertisement
Table of Contents
