ATEN ES0152 User Manual page 49

Dot1x timeout tx-period <1-65535>
Parameters:
Parameter
Authentication
Feature
Guest-VLAN
Max-reauth-req
Re-authentication
System-auth-control
Timeout
Timer
Re-authenticate
<1-3600>
Guest-VLAN
<1-4095>
Supplicant
<1-255>
Tx-period
<1-65535>
Example:
ES0152(config)# dot1x authentication timer re-
authenticate 1000
ES0152(config)# dot1x feature guest-vlan
ES0152(config)# dot1x guest-vlan 33
ES0152(config)# dot1x max-reauth-req 3
ES0152(config)# dot1x re-authentication
ES0152(config)# dot1x system-auth-control
ES0152(config)# dot1x timeout tx-period 3000
Chapter 5. CONFIGURE Commands of CLI
Description
Authentication.
Globally enables/disables a dot1x feature functionality.
Guest VLAN.
The number of times a Request Identity EAPOL frame is sent
without response before considering entering the Guest
VLAN.
Set Re-authentication state.
Set the global NAS state.
Timeout.
Timer.
The period between re-authentication attempts in seconds.
Seconds (1..3600).
Globally enables/disables state of guest-vlan.
Guest VLAN ID used when entering the Guest VLAN
(1..4095).
The switch remembers if an EAPOL frame has been received
on the port for the life-time of the port. Once the switch
considers whether to enter the Guest VLAN, it will first check if
this option is enabled or disabled. If disabled (unchecked;
default), the switch will only enter the Guest.
Number of times (1..255).
The time between EAPOL retransmissions.
Seconds (1..65535).
37