Table of Contents
Advertisement
ES0152 / ES0152P CLI User Manual
COMMAND
dhcp_snooping_port_mode
show ip dhcp snooping table
ip name-server { <ipv4_ucast> | dhcp [
interface vlan <vlan_id> ] }
no ip name-server
show ip name-server
ip dns proxy
show version
firmware upgrade <word>
firmware swap
show green-ethernet fan
230
DESCRIPTION
Use the ip dhcp snoop-
ing trust interface con-
figuration command to
configure a port as
trusted for DHCP
snooping purposes.
Use the no form of this
command to configure
a port as untrusted.
Use the show ip dhcp
snooping table user
EXEC command to
display the IP assigned
information that is
obtained from DHCP
server except for local
VLAN interface IP
addresses.
Set the DNS server for
resolving domain
names
Stop resolving domain
names by accessing
DNS server
Display the active
domain name server
information
Enable DNS proxy ser-
vice
Use show version to
display firmware infor-
mation.
Use firmware upgrade
to load new firmware
image to the switch.
Use firmware swap to
swap the active and
alternative firmware
images.
Shows Fan status
(chip Temperature and
fan speed).
P
M
INTER-
FACE_P
15
ORT_LIS
T
15
EXEC
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
0
EXEC
GLOBAL
15
_CONFIG
0
EXEC
15
EXEC
15
EXEC
GLOBAL
15
_CONFIG
Advertisement
Table of Contents
