Table of Contents
Advertisement
COMMAND
show access-list ace-status [ static ] [ link-
oam ] [ loop-protect ] [ dhcp ] [ ptp ] [ upnp ]
[ arp-inspection ] [ mep ] [ ipmc ] [ ip-
source-guard ] [ ip-mgmt ] [ conflicts ] [
switch <switch_list> ]
show aggregation [ mode ]
aggregation mode { [ smac ] [ dmac ] [ ip ] [
port ] }
no aggregation mode
aggregation group <uint>
no aggregation group
ip arp inspection
Chapter 25. CLI COMMAND REFERENC-
DESCRIPTION
Use the show access-
list ace-status privi-
lege EXEC command
without keywords to
display the access-list
ace status for all
access-list users, or
particularly the access-
list user for the access-
list ace status. Use
conflicts keyword to
display the access-list
ace that doesn't apply
on on the hardware. In
other word, it means
the specific ACE is not
applied to the hard-
ware due to hardware
limitations.
Use the ip arp inspec-
tion global configura-
tion command to
globally enable ARP
inspection. Use the no
form of this command
to globally disable ARP
inspection.
P
M
15
EXEC
15
EXEC
GLOBAL
15
_CONFIG
GLOBAL
15
_CONFIG
INTER-
FACE_P
15
ORT_LIS
T
INTER-
FACE_P
15
ORT_LIS
T
GLOBAL
13
_CONFIG
217
Advertisement
Table of Contents
