Ai Mode Display Components; Ai Mode - Basic Components - uAvionix AV-30-E Pilot's Manual

Operation in both AI and DG modes share common user interface
controls as follows:
Left Push Button
Photo Cell
(Auto Screen
Brightness)
Press and hold the center knob to switch between AI and DG mode
when Function Lock is disabled. See section 13 Install Menu
Activation.

6.2 AI Mode Display Components

The following section describes the user interface operations when
operating as an AI.
6.2.1 AI Mode – Basic Components
The following figure shows the basic AI with all customizable data
overlay fields turned off.
The data shown cannot be disabled or customized:
UAV-1004233-001, AV-30-E Pilot's Guide
Figure 5 - Common User Interface Components
15
TFT Color Display
Right Push Button
(Hold For
Brightness Adjust)
Rotary Knob with
Momentary Push
Revision A