uAvionix AV-30-E Pilot's Manual page 35

7.5 tailBeaconX Control
B
D
F
To Change Squawk
• Press in the center knob
• Navigate highlighted cursor to desired digit by rotating the knob
• Press in the center knob to select the desired digit
• Rotate the center knob to change the squawk digit
• Press in the center knob to accept the change
• Press the left button (DONE) to finish
To Change Mode
• Press in the center knob
• Press the right button to cycle through each Mode selection (STBY,
ON, ALT)
• Press the left button (DONE) to finish
To Ident
• Press the left button
Quick Squawk 1200
• Press in the center knob
• Press in the center knob to select a squawk digit
• Press the right button to quick squawk 1200
• Press the left button (DONE) to finish
UAV-1004233-001, AV-30-E Pilot's Guide
A
C
35
A Configured Callsign
B Current Squawk Code
C Mode Selection (STBY, ON,
ALT)
D GPS NIC
E GPS NACp
E
F Pressure Altitude, Yellow
indicates radar
interrogation, Will change to
IDT if IDENT is active
G
G Communication status (OK,
TMOUT)
Revision A