point.
• See the Setup Menu instructions and adjust the upper limit.
• Repeat the above procedure as required.
11.4 Setting AoA Lower Limit
The objective is the set the AoA lower limit to correspond with normal
en-route operation with one or two lower green bars illuminated.
• Configure the aircraft for normal en-route operation (typically
gear retracted and flaps fully retracted) and observe the AoA
indication.
• If more than 2 "green" bars are showing, the lower AoA limit
needs to be numerically lowered.
• If no "green" bars are showing, the lower AoA limit needs to be
numerically increased.
• See the Setup Menu instructions and adjust the lower limit.
• Repeat the above procedure as required.
UAV-1004233-001, AV-30-E Pilot's Guide
43
Revision A