Edit Presented Data - uAvionix AV-30-E Pilot's Manual

7.3.3 Edit Presented Data

The following shows the display when the edit mode is active.
Rotating the knob left and right will then select from the various
overlay values that can be presented in the selected field.
Note that not all data values can be presented in each editable field
area. For example, airspeed will only be displayed on the left main
area and altitude will only be displayed on the right side.
Additionally, when operating in the DG mode, the available data
displayed is different than when operating in the AI mode.
UAV-1004233-001, AV-30-E Pilot's Guide
When the desired data type is presented, pressing the
knob in will accept the current value, and the edit mode
will remain active.
Pressing the DONE shown in the lower left button will
accept the current value and exit the UI customization
mode.
Figure 27 - Display Edit Value
31 Revision A