Common Ui Operations; Push-Set Window - uAvionix AV-30-E Pilot's Manual

7 Common UI Operations

7.1 Push-Set Window

The Push-Set window is activated by pushing the main rotary knob in
momentarily.
This will activate a window along the bottom of the display to allow
various parameters to be adjusted with the rotary knob. Pushing the
rotary knob after a value has been adjusted will accept the modified
value.
Rotating the knob when this is displayed will change the baro setting.
If however, the display is configured NOT to show altitude, the baro
setting will not be presented as an option to adjust.
Push-Set Value
Baro Setting
Direction Indication
Heading Bug
Set Altitude
UAV-1004233-001, AV-30-E Pilot's Guide
The parameters that can be adjusted will vary, based on
the mode of the unit and the current configuration of the
display. The following indicates how baro is adjusted
when altitude has been configured for display:
Figure 22 - Push-Set Example - Baro
When Presented
When altitude is configured for display
When non-slaved heading is configured for display
When non-slaved heading or GPS track is configured for display
When set altitude is configured for display
Table 1 – Context Sensitive Push-Set Values
27 Revision A