SPRT SP-RMD11A User Manual page 47

GS k 73 10 123 66 78 111 46 123 67 12 34 56
· If it is not the choosing of characters set at the beginning of barcode data, the printer will
stop dealing with this command and deal with the other data as the common data.
· If the combination by "{" and that following character is not in the above form, the printer
will stop dealing with this command and deal with the other data as the common data.
· If the character received by printer is not barcode characters set data, the printer will
stop dealing with this command and deal with the other data as the common data.
· When printer prints HRI characters, it doesn't print shift character and choosing data in
characters set.
· Function characters in HRI character won't be printed.
· Control characters(<00>H to <1F>H and <7F>H)in HRI character won't be printed.
Pls be sure the space at both left and right side of barcode. The space will be different
according to the different barcode.
Pls refer to GS H, GS h, GS w, Appendix 5.
GS H n
Format: ASCII:
Decimal:
Hexadecimal:
Explanation: 0 ≤ n ≤ 3, 48 ≤ n ≤ 51. When printing barcode, choosing printing position for
HRI characters.
n can appoint the printing position of HRI:
n
0, 48
1, 49
2, 50
3, 51
HRI is note character for barcode content. Default value: n=0.
Pls refer to GS k
Remark: if n is in other value, it is invalid.
GS h n
Format: ASCII:
Decimal:
Hexadecimal:
Explanation:Set the height of printed bar code. n=0~255, unit is dot. If n=0, it is 256dots.
Default value n=60.
GS w n
Format : ASCII : GS
Decimal:
Hexadecimal:
Choose printing position of HRI character
GS H
29 72
1D 48
Printing position
Don't print
Above barcode
Below barcode
Both above and below barcode
GS h n
29 104 n
1D 68 n
w n
29 119
1D 77
n
n
n
Set Bar code Height
Set Bar code Width
n
n
45