SPRT SP-RMD11A User Manual page 36

Explanation:
The using explanation is same as the command for Printing Curve I.
FS P
[Format] ASCII:
Decimal:
Hex:
Explanation:
0≤ n ≤2, this command is used to print the monochrome bitmap which is pre-saved in the
Flash memory of printer. The bitmap in Flash memory can be created and wrote into
printer through Setting Tool in PC. The largest width of bitmap is 384dots and the largest
height is 1365dots. (The bitmap can't be over 64km.) "n" is the number of bitmap.
Remark: If the number of bitmap isn't defined, this command is invalid.
The bitmap must be monochrome.
This command won't be affected by printing mode (underline, character size or
reverse white printing).
If the width of printed bitmap is beyond one line, the beyond part won't be
printed out.
It needs the special setting tool to download the bitmap. Pls ref. (RMDIIID
Setting Tool). The downloaded bitmap through this method won't be low, unless
it is covered by other bitmap.
ESC t
Format: ASCII:
Decimal:
Hexadecimal:
Explanation:
0 ≤ n ≤ 45, when n is 0xFE, cancel choosing codepage. The character will be printed out
according to Codepage Table in Appendix 2. Default n=0xFE, which means no
codepage is choosed.
Choose codepage on n page from the following Codepage Table. The value of n is in
decimal format.
n
代码页
0 CP437 [美国，欧洲标准]
1 KataKana [片假名]
2 PC850 [多语言]
3 PC860 [葡萄牙]
4 PC863 [加拿大-法语]
5 PC865 [北欧]
6 WCP1251 [斯拉夫语]
7 CP866 斯拉夫 2
8 MIK[斯拉夫/保加利亚]
FS P n
28 80 n
1C 50 n
ESC t n
27 116 n
1B 74 n
34
Print Pre-saved Bitmap
Choose Codepage
Code Page
CP437 [U.S.A., Standard Europe]
Katakana
PC850 [Multilingual]
PC860 [interfaceuguese]
PC863 [Canadian-French]
PC865 [Nordic]
WCP1251 [Cyrillic]
CP866 Cyrilliec #2
MIK[Cyrillic /Bulgarian]