Table of Contents
Advertisement
symbols, etc I A1 and A9 zone are 24dots. Each Chinese character has two bytes. Big5
characters with 16dots are in Traditional Chinese characters library.
The following is the detailed of Chinese Character Print Commands:
FS &
Format: ASCII:
Decimal:
Hexadecimal:
Explanation:
After printer received this command, it will switch from ASCII character print mode to
Chinese character print mode. Using GB Chinese Character Library I&II.
Notice: This command is used to switch printer into Chinese Mode when printer is in
normal printing mode, but won't be saved after power off. Only after setting through
Setting Tool, the result can be saved.
FS ·
Format: ASCII:
Decimal:
Hexadecimal: 1C
Explanation:
After printer received this command, it will switch from Chinese character print mode to
ANK characters print mode.
Notice: This command is used to switch printer into ANK characters print mode when
printer is in normal printing mode, but won't be saved after power off. Only after setting
through Setting Tool, the result can be saved.
FS SO
Format: ASCII:
Decimal:
Hexadecimal:
Characters following this command are printed at twice their normal width, does not
enlarge the height.
Notice: this command is valid only in one line.
FS
&
28
38
1C
26
Cancel Chinese Print Mode
FS
.
28
46
2E
Set Chinese Double Width Print
FS
SO
28
14
1C
0E
Select Chinese Print Mode
37
Explanation:
Advertisement
Table of Contents
Need help?
Do you have a question about the SP-RMD11A and is the answer not in the manual?