Initialization Commands; Data Control Commands; Chinese Character Print Commands - SPRT SP-RMD11A User Manual

4.2.6 Initialization Commands

ESC @
Format: ASCII:
Decimal:
Hexadecimal: 1B
Explanation:
This command is to initialize the following contents of the printer:
·Clear the data in the print buffer;
·Restore the default;
·Delete user-defined characters.

4.2.7 Data Control Commands

CR
Format: ASCII:
Decimal:
Hexadecimal:
Explanation:
When the "CR" command is sent to printer, all data in the print buffer will be printed out
and paper will be fed one line.
NUL
Format: ASCII:
Decimal:
Hexadecimal:
Explanation:
NUL command is used as the final code in some commands such as ESC B, ESC D,
ESC% and ECS ', to denote these commands are over. NUL command is ignored when
used alone.

4.2.8 Chinese Character Print Commands

The command to print Chinese character is FS standard command. All Level I&II
Chinese characters and graphics, etc in 16dots&24dots Chinese character library are
according to Chinese National Standard GB2312-80. For 24dots, there are only graphics,
ESC @
27 64
40
CR
13
0D
NUL
0
00
36
Initialize Printer
Carriage Return
NUL