Pas Ratio Settings; Slowly Start Up Settings; Power-On Password Settings - Key-Disp KD58C User Manual

PAS Ratio settings

To modify the value of PAS ratio can match the different requirements.
For example, the range is "45-55 percent" of 1 level, bottom value can be modified
and the default is 50 percent.
Press the UP or DOWN button to increase or decrease the number. Press the MODE
button to confirm and turn to the next PAS ratio settings. 9 levels is the maximum. After
all PAS ratio inputted, press the MODE button to confirm and return to general selection
settings interface. Various symbol definitions please refer to Attached list 2.
◆

Slowly Start up Settings

Slow Start represents slowly start up. The range is 1-4, 4 is the slowest.
To change slowly start up settings, press the UP or DOWN button to select, press the
MODE button to confirm and the meter will display OK then return to general selection
settings interface . The default value is 1.
◆

Power-on Password Settings

P2:0000 represents power-on password settings. The default value is 1212.
To access the power-on password settings, press UP/DOWN to modify the value
and then press MODE to confirm digit one by one until the correct 4-digit password is
completed, and then press MODE to access power-on password enable settings
interface, otherwise stay on the password input state.
PAS Mode option Interface
PAS Ratio Interface
Interface of slowly settings up
7