Http Push Status - VBrick Systems VBRICK APPLIANCE VB4000 Admin Manual

HTTP Push Status

State
Information
Retry Count
Bytes Sent
Elapsed Time
106
Packet Sender (the encoder) Ready to Send or Not Ready to Send.
If enabled, Push information is shown here (and written to the System
Event log) whenever it changes.
Increments for each retry. The appliance will automatically retry the
push every 2–10 seconds until the connection is successful. Retries
may occur due to incorrect push configuration, networks problems, or
server resets.
Total byte count since the push connection was established.
Total elapsed time since the push connection was established.
© 2008 VBrick Systems, Inc.