Table of Contents
Advertisement
To play back an HTTP stream using .asx:
•
Launch the player directly from the IWS by clicking the
a good way for the WM Appliance administrator to easily view the stream when adjusting
various encoder parameters via the IWS.
•
Right-click on
.asx file to your computer. You can then double click the .asx file to launch the player and
play the HTTP stream. E-mail the HTTP .asx file or make it available on a shared
network drive to allow other viewers to play the HTTP stream.
•
Play the HTTP stream from an embedded player in a web page or from a standalone
player or browser using the URL
Appliance serves the HTTP .asx file via HTTP.) The URL to the multicast .asx for Slot 2
of a dual WM Appliance is
•
Use VBrick's StreamPlayer product to add an automatic program guide to Windows
Media Player so when you run StreamPlayer it will automatically list all the WM programs
available on your network. The user can then click on a program to launch Windows
Media Player to play the stream. (The WM Appliance can send network announcements
of the HTTP stream using SAP (Session Announcement Protocol).)
To stream RTSPU without using .asx:
•
Use the RTSPU URL shown in IWS (for example
You can use
create a web page with an embedded player and a link to the RTSPU URL.
To stream RTSPU using .asx:
•
Launch the player directly from the IWS by clicking
good way for the WM Appliance administrator to easily view the stream when adjusting
various encoder parameters via the IWS.
•
Right-click on
.asx file to your computer. You can then double click the .asx file to launch the player and
play the RTSP stream. E-mail the RTSP .asx file or make it available on a shared network
drive to allow other viewers to play the RTSP stream.
•
Play the RTSP stream from an embedded player in a web page or from a standalone
player using the URL
serves the RTSP .asx file via HTTP.) The URL to the multicast .asx for Slot2 of a dual
WM Appliance is
•
Use VBrick's StreamPlayer product to add an automatic program guide to Windows
Media Player so when you run StreamPlayer it will automatically list all the WM programs
available on your network. The user can then click on a program to launch Windows
Media Player to play the stream. (The WM Appliance can send network announcements
of the HTTP stream using the Session Announcement Protocol.)
Announce HTTP and RTSPU Server
You can optionally send network announcements using a SAP (Session Announcement
Protocol) that provides information about the multicast and unicast streams created by your
VBrick WM Appliance. Other VBrick products such as EthernetTV and StreamPlayer can
use the SAPs to automatically create program listings to allow viewers easy access to the
streams from the VBrick. Use the Announce HTTP and RTSPU section to enable/disable
SAPs and to control the destination address and other parameters for the announcement
VBrick WM Appliance Admin Guide
Click here to play HTTP
<http://vbrickipaddress/vbs1http.asx>
<http://vbrickipaddress/vbs2http.asx>
in Windows Media Player to play the URL or you can
File > Open URL
Click here to play RTSP
<http://vbrickipaddress/vbs1rtsp.asx>
<http://vbrickipaddress/vbs2rtsp.asx>
Click here to play HTTP
and select
Save Target As
rtspu://vbrickipaddress/vbrickvideo1
Click here to play RTSPU
and select
Save Target As
. (The WM Appliance
.
WM Configuration
. This is
to write the HTTP
. (The WM
.
).
. This is a
to write the RTSPU
45
Advertisement
Table of Contents
