Table of Contents
Advertisement
Failed Count
Last Failed Login IP
Estimated Receive
Rate
ASF
Packets Created
Buffer Full Count
Multicast
Transmit State
IP Bytes Transferred Number of bytes multicast.
IP Packets Sent
Status: JPEG Status
Displays JPEG image capture status if enabled. See Configuration: JPEG on page 66 for
more about configuration.
100
Increments each time a push sender tries to connect but fails.
Common reasons for failed attempts are incorrect publishing point
name, user name, or password. Note: A successful push that is active
and incrementing the Failed Count usually indicates that another
source is trying to push to this server.
The address of the last push sender that failed a connection attempt.
The calculated rate of the incoming reflected stream.
Packets created for Multicast, Server, Push, or Archive. If any
destination is not active, the counts are not incremented even though
the reflected stream is active.
Count of packets dropped because the destination was busy.
Transmitting/Not Transmitting. Indicates whether or not a multicast
is active.
Number of packets multicast.
© 2008 VBrick Systems, Inc.
Advertisement
Table of Contents
