Table of Contents
Advertisement
General
Archiver State
File in Progress
Data Recorded in
Current File
File Start Time
Buffer Full Count
Last Complete File
Total Bytes Archived Total bytes archived in all files on hard drive since last status reset.
FTP Status
FTP Status
FTP File in Progress Name of file currently being sent to the FTP destination server(s).
Last Completed FTP
File
VBrick WM Appliance Admin Guide
Status of the Archiver as follows:
• Failed.
• Stopped, never started.
• Stopped, by user.
• Stopped, Disk Full (less
than 100 MBytes remains)
• Stopped, File Size Limit
(approximately 4 GB).
• Stopped, FTP Overrun.
• Stopped, Duration
Complete.
File currently being archived.
Reports the number of bytes currently recorded.
Starting time of the current recording.
Increments when the appliance is in an overloaded condition. Reduce
the load by lowering bit rates or reducing the number of RTSP and/
or HTTP clients.
Last file archived.
Status of hard drive FTP send as follows:
• Idle.
• Invalid FTP Server.
• Invalid User Name.
• Invalid User Password.
• Local File Open Error.
Name of last completed file sent via FTP.
• Stopped, File Full.
• Stopped, Unformatted.
• Stopped, IO Error.
• Running, From Power Up.
• Running, Scheduled.
• Running, User Initiated.
• Transfer Failure.
• Transfer in Progress.
• Socket Open Failure.
• Socket Quit Failure.
Status
103
Advertisement
Table of Contents
