Table of Contents
Advertisement
Command
c nt 6 xxx
c nt a
c nt 2
yy.yy.yy.yy
c nt a
c nt 3
zz.zz.zz.zz
c nt a
c nt 4
vv.vv.vv.vv
c nt a
c nt 1
s ui m 1
130
Description
To edit the IP Host Name. The default
is the Media Access Control (MAC)
address, a hardware address that
uniquely identifies each node of a
network.
Apply the changes
To edit the IP address
Apply the changes
To edit the Sub Net Mask
Apply the changes
To edit the IP Gateway address
Apply the changes
Displays the IP parameters
Displays Board User Information.
Entry
The Host Name can be a
maximum of 18 characters; the
first character must be a letter and
the last character a number. The
middle characters can be letters,
numbers or hyphens.
Must be issued prior to save.
Where yy.yy.yy.yy is the new IP
address.
Must be issued prior to save.
Where zz.zz.zz.zz is the new
subnet mask associated with the
Ethernet interface.
Must be issued prior to save.
Where vv.vv.vv.vv is the IP address
of the IP gateway.
Must be issued prior to save.
The User Information contains the
part number and Ethernet MAC
address of the VBrick.
© 2008 VBrick Systems, Inc.
Advertisement
Table of Contents
