VBrick Systems VBRICK APPLIANCE VB4000 Admin Manual page 56

network packets. The HTTP, RTSPU, and External Server SAPs controlled here all share the
Announce Common Information
the Configuration: Encoder > Announce (SAP) page.
Figure 10. Configuration: Encoder > Server – Part 2
HTTP SAP
Transmit
RTSPU SAP
Transmit
Retransmit Time
Time To Live
Type Of Service
IP Address
Port
RTSP URL
46
that is shown read-only on this page but can be changed on
Enables/disables the transmission of SAPs to advertise the HTTP
URL for this encoder.
Enables/disables the transmission of SAP packets to advertise the
RTSP URL for this encoder.
If Transmit is enabled, this setting tells the VBrick how often (in
seconds) to send a SAP.
The number of hops (between routers) for which an IP packet is valid
on the network.
The TOS (Type of Service) can be configured in the IP header to
establish SAP packet priority in the network.
The IP address to which SAP information is sent out onto the
network. To have a WM encoder announce the stream to a Portal
Server, use the Portal Server IP address and default Port (9878).
The port SAP to which information is sent out onto the network. To
have a WM encoder announce the stream to a Portal Server, use the
Portal Server IP address and default Port (9878).
The RTSP URL that is advertised in RTSP SAPs.
© 2008 VBrick Systems, Inc.