Configuration: Ftp File Transfer; Configuration: Ftp File Transfer > Servers - VBrick Systems VBRICK APPLIANCE VB4000 Admin Manual

Table 13. Supported Clients with JPEG Capture
Model
Dual WM/WM encoder
(with archiver)
Dual WM/MPEG-2
encoder (with archiver)
† The actual number of supported clients will generally vary slightly depending on your
hardware configuration, network constraints, and other variables.

Configuration: FTP File Transfer

Configuration: FTP File Transfer > Servers
Up to eight servers are available and can be simultaneously selected. When more than one
server is enabled, the appliance will transfer the newly recorded file to each enabled server.
Since FTP transfer can be a slower than the recording process, it is possible to overrun the
FTP queue if too many servers are enabled. Failure conditions during FTPs are noted on
Status: Hard Drive > Archiver page.
VBrick WM Appliance Admin Guide
JPEG Configuration
JPEG disabled on both slots.
JPEG enabled on one slot.
JPEG with deinterlace enabled on one slot.
JPEG enabled on both slots.
JPEG enabled on both slots; JPEG deinterlace
enabled on one slot.
JPEG with deinterlace enabled on both slots.
JPEG disabled on slot1.
JPEG enabled on slot1.
JPEG with deinterlace enabled on slot1.
WM Configuration
Max Clients †
180
140
100
100
60
20
200
200
170
69