VBrick Systems VBRICK APPLIANCE VB4000 Admin Manual page 80

FTP Server 1–8
Name
Type
DNS Name/IP
User Name
Password
Account
70
FtpServer1–FtpServer8.
VBrick or Non-VBrick Appliance.
• VBrick Appliance – When sending to a VBrick appliance, the
serving VBrick must select the D: directory. The configuration of
VBrick Appliance automatically adds D: to the path name or to any
other configured folder or as part of the Directory entry. If no
folder is specified, all files will be transferred to the D: directory.
Additionally, subfolders may be specified.
• Non-VBrick Appliance – A non-VBrick appliance setting allows a
destination server to select its own path name, based on account
user name and password. In this case, the Directory setting may be
used to specify any sub-folder on the server.
DNS server name or IP address for the FTP server. It accepts up to 20
characters. The Host Name/IP must be a DNS Host Name.
FTP server user's account name.
Optional. Password required to access the FTP server. Accepts up to
20 characters. The FTP User Name and Password must be set up
properly on the remote FTP server. If they are not entered the same as
what is set up on the server, the VBrick will be unable to connect and
perform the transfer.
Optional. Account name required to access the FTP server.
© 2008 VBrick Systems, Inc.