VBrick Systems VBRICK APPLIANCE VB4000 Admin Manual page 107

General
Encoder State
FPGA Revision
PLX EEPROM
Revision
Video
Bit Rate
VBrick WM Appliance Admin Guide
indicates normal operation.
Running
indicates a problem with the video source. Verify that the video
source is working correctly and that your video cable is good.
Verify that the Configuration: Encoder > Video > Video Input
Type is properly set to Composite or S-Video to match your source
connection. Verify that Configuration: Encoder > Video > Video
Format is properly set to NTSC or PAL to match your source
format. Note that the WM encoder will transmit black video when
there is an input problem.
Used by VBrick Support to identify encoder hardware version.
Used by VBrick Support to identify encoder hardware version.
Measured rate in bits per second of the encoded video stream
being created by the appliance.
Status
Video Input Problem
97