Table of Contents
Advertisement
Note Internet Explorer 7.0 only. When using
the
Archiver
around this issue, go to
window, and then go to
password.
Windows Media Archiver -- Slot1
Click here to examine ... Click on this link to examine hard drive content. You must know
Archive Mode
IR Control
52
page, a web page is displayed and you can't open the links. To work
Page > Open FTP Site in Windows Explorer
File > Login As
the user name and password to login to the FTP server and view
content. You can use any FTP client application to access the hard
drive using a URL like this:
to login to the D: drive as shown. Do not modify or store files on
the C: drive. The C: drive has limited space and is reserved for VBrick
firmware.
• User Controlled – Default. The user controls which files to
record and send to which configured server using IWS, SDK,
and/or the IR remote.
• Start Record on Power-up – When the appliance is powered up
the WM Archiver will automatically start.
• Scheduled – The archive is started automatically at the
configured time and date.
The Infrared Remote control is enabled by default. If enabled,
press
on the remote control to start archiving a file; press
Record
again to stop. Check the front panel on the VBrick for a
Record
corresponding message. Press
Auto FTP after archive
Click here to examine hard drive content
and enter
admin/admin
ftp://admin@<IP_Address>/D:
to FTP the last recorded file if
Send
is disabled.
© 2008 VBrick Systems, Inc.
on
, close the error
as the user name and
Be sure
Advertisement
Table of Contents
