Table of Contents
Advertisement
Power Supply
Voltage
Status: Network Status
Status: Network Status > Codec
This page lets you view various network-level parameters.
General
COM1/COM2
Passthrough
Operational State
Active RFC-SAP Count Number of SAP sessions the appliance is currently listening to for
Network Port Status
Network Port Speed
Network Port Mode
Interface
This section reports the existence of any undesired (and unrequested) video streams being
received by the VBrick. Unrequested streams greater than 1.5 Mbps are automatically flagged
and dropped. The reporting is made for each IP interface individually. On Ethernet models,
only one interface exists.
94
Displays the measured voltages present and provided to the VBrick
(24V, 12V, 5V, 3.3V 2.5V). The tolerance range for 24V is minimum
18V to maximum 25V. The range for all other voltages is plus or minus
5%.
The current operational state of COM1/COM2 serial passthrough
port. The possible values are:
• Disabled.
• Enabled Active.
• Enabled Internal Error.
• Enabled Rejected.
• No Dedicated IP Addr.
the purpose of RFC 2974-compliant SAP timing.
Status of the Ethernet network interface.
Speed of transmission for the Ethernet network interface.
The mode of transmission for the Ethernet network interface.
© 2008 VBrick Systems, Inc.
Advertisement
Table of Contents
